• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.78-81
• /
• 2003

Polishing Processes are widely used in the glass, optical, die and semiconductor industry and are conventionally carried out using abrasive slurry and a polishing pad. But abrasive slurry process has a weak point that is high cost of handling of used slurry and hard controllability of slurry. Recently, some researches have attempted to solve these problems and one method is the development of a fixed abrasive pad. FAP has a couple of advantages including clean environment, lower CoC, easy controllability and higher form accuracy. But FAP also has a weak point that is need of dressing because of glazing and loading. The paper introduces the basic concept and fabrication technique of FAP using hydrophilic polymers with swelling characteristics in water and explains the self-conditioning phenomenon. Experimental results demonstrate to achieve nano surface roughness of soda lime glass for optical application

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2017

Hydrolysis resistance and mechanical property changes of polyketone (POK)/glass fiber (GF) composites were investigated for GF concentrations varying between 30 and 50%. The hydrolysis resistance of GF filled POK and polyamide66 (PA66, hydrolysis resistant grade) composites were compared. As shown by the experimental results, increasing the immersion time of the composites in a monoethylene glycol (MEG)/water solution at $120^{\circ}C$ had no impact or resulted in slightly decreased mechanical properties such as the tensile strength, tensile modulus, and strain at break in case of POK composites, whereas the mechanical properties of PA66 composites showed a significant drop. Increasing GF concentrations increased the tensile strength, tensile modulus, flexural strength, and flexural modulus of POK composites; however, impact strength did not show significant changes. Hydrolysis mechanisms of POK and PA66 are discussed.

• Journal of Technologic Dentistry
• /
• v.14 no.1
• /
• pp.95-118
• /
• 1992

Glass ceramics for crown were prepared by adding 3$\sim$11 wt% TiO2 to the weight percent composition of 34.7 CaO, 27.8 SiO2, 18.3P2O5, 12.6MgO and 6.6 TiO2. The starting glasses were prepared by melting the powdered batch in alumina crucible at 1350$\sim$1400 for 1 hr and then quenching into a distilled water. The nucleation and crystallization of the crystalline glass ceramics for crown were studied by DTA, SME and X-ray diffraction analysis. Frit containing 9.11 wt% TiO2 had crystallization temperature of 850$\sim$1075 and major crystalline phase was identified by X-ray diffraction as diopside(CaO-MgO-2SiO2). Activation energies for the crystallization processes were obtained from DTA by varing rates for the fits, and were calculated from modified Ozawa and Kissinger equations. Activation energy for the crystallization processes of the S-4 frit was 489.6 KJ/mol.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.101-110
• /
• 1987

The relative electrical conductivity of vacuum deposited Al films on a soda-lime(2947) and an alumino boro silicate(7809) glass was investigated with the variation of the relative humidity,temperature and film thickness. The structure and microstructure of Al films before and after exposure to the humidity wereexamined by the X-ray Diffractormenter(XRD) and Scanning Electron Microscope(SEM). As the relative humidity increased, the electrical conductivity of Al films on both glasses was decreased. However, the Al films on 7809 glass showed higher conductivity than that of 2947 glass under the same testing conditions. The decreasing of electrical conductivity was caused by the formation of Aluminum hydroxide which was made by the reaction between the aluminum films and water vapor.

• Journal of Microbiology
• /
• v.37 no.4
• /
• pp.263-266
• /
• 1999

In examining bacterial growth on glass surfaces immersed in sea water, we found serious differences between enumeration methods. Therefore, we compared various methods and found sonication and direct count methods were superior to other methods. Since the direct count method was not suitable for long-term investigation, we chose the sonication method and confirmed that sonication periods 8 times for 30 seconds was optimal for the detachment of bacteria from glass surfaces.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.19-20
• /
• 2019

This study investigated the possibility of strength development by incorporating the slighly coarser soda-lime glass powder (GP) with 0-100 wt.% of Ground Granulated Blast Furnace Slag (GGBS) to synthesis GGBS based geopolymer. Compressive strength, water absorption & apparent porosity, were experimentally determined. To determine the homogeneity of mix, the microstructure & elemental composition of samples were studied using SEM-EDS. Study reveals the improvement in strength and reduction in porosity for the samples containing up to 30% GP. Furthermore, the microstructure analyses confirmed the development of denser and compact structure with the incorporation of glass powder up to 30%.

• Korean Journal of Ecology and Environment
• /
• v.47 no.spc
• /
• pp.31-38
• /
• 2014

The fish community and upstream of glass eels (Anguilla japonica) in the Imjin River estuary Gyeonggi-do, Korea was investigated from 2008 to 2012. During the surveyed period 43 species belonging to 18 families were collected. Korean endemic species was Microphysogobio jeoni which showed a ration of 0.04% in collected species. Exotic fishes were Carassius cuvieri and Ctenophayngodon idellus, and comprised 0.06% of the total individual number. Among the fish species observed, 17 species of the freshwater fish (40.5%), 6 species of migration fish (14.2%), 8 species of the brackish water fish (19.1%) and 11 species of sea water fish (26.1%). In terms of composition ration, Anguilla japonica (glass eels, 49.8%), Coilia ectens (23.3%), Saurogobio dabryi (8.1%), Repomucenus olidus (3.3%), Lateolabrax maculata (2.9%) and Chelon haematocheilus (2.8%) were found to display high individual number. On the other hand, C. ectens (33.6%), C. haematocheilus (14.2%), Cyprinus carpio (10.5%), Mugil cephalus (9.1%) and S. dabryi (7.6%) were dominated of biomass. The dominant species of individual was A. japonica (glass eels), and subdomint species included C. ectens. The fish biomass catched of fisherman in the Imjin River (Paju-si) were 83.6~240.3 t by each year. The year 2011 and 2012 were decreased rapidly. Among these, M. cephalus (48.0~80.0%), C. carpio (6.7%), Carassius auratus (4.9%), Silurus asotus (3.9%), Takifugu obscurus (2.5%), Anguilla japonica (adult, 2.2%) and Pseudobagrus fulvidraco (2.1%) dominated of biomass. Body weight of glass eels at each year were 0.03~ 1.13 t, average 212.0 kg and 1,325,000 individual by 0.16 g each one individual.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.1
• /
• pp.112-120
• /
• 1996

In this study, the porous glass media was utilized as biomass carrier, and the optimum characteristics of this new media in fixed bed biofilm process were investigated. The characteristics of media considered here are a void volume fraction, a specific surface area, and surface characteristics of media. The effect of surface roughness and material could be clearly demonstrated by the fact that the porous glass media showed a good potential for biofilm development. This might results from the fact that biofilm is initially formed in the surface cavities of the media is protect from the shear effect. Therefore, the microcolonies are not readily detached by the fluid shear. In the steady state, biofilm formation along the packing bed depth was different from media to media. The specific area was also an important factor for the attachment of microorganism on the media surface. The specific area was also an important factor for the attachment of microorganism on the media surface. In the case of porous glass media, about $100m^2/m^3$ was enough to obtain a good organic removal efficiency The organic removal efficiency could be improved by increasing the void volume fraction in the reactor, at least 80% was required to obtain a high removal efficiency and prevent clogging. From the analysis of kinetics study, the yield coefficient, Y, was 0.42 mgMLSS/mgSBOD, endogenous respiration coefficient, ke, was $0.12day^{-1}$ and substrate removel coefficient of Mckinney. km, was $16.8hr^{-1}$ for the porous glass media G-2

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.3
• /
• pp.115-121
• /
• 2017

The degradation of the concrete due to deterioration factors, such as corrosion of steel bars, cracks and structural strength of reinforced concrete structures, is a social problem. Especially, concrete structures constructed in seawater, underground water, waste water treatment facilities and sewerage are subject to chemical attack by acid and sulphate. Therefore, this study was conducted to compare sulfated glass and fine aggregate of slag using waste glass fine powder and meta kaolin. The results showed that the slag fine aggregate showed better sulfate resistance than the river sand, and the fine powder of waste glass showed the best performance at 3 % displacement.

• Restorative Dentistry and Endodontics
• /
• v.7 no.1
• /
• pp.77-83
• /
• 1981

The purpose of this study was to observe the bonding strength between tooth surface (enamel and dentin) and restorative filling materials which are two composite resins (Clearfil and Concise) and Glass ionomer cement, after etching with 50% phoshoric acid and 37% citric acid. To measure the bonding strength in enamel, the labial surface of upper anterior tooth was cut flatly with using carborundum disk and polished with sand paper disk, and to measure in dentin, the dentin surface was prepared by grinding upper part of posterior tooth horizontally. After washing the tooth surface with water and drying with air blast, the prepared tooth surface was etched. In glass ionomer cement, 50% phosphoric acid and 37% citric acid were used, in Clearfil 40% phosphoric acid was used and in Concise, 50% phosphoric acid and 37% citric acid were used as etchant for 1 minute. After the copper band which is 5 mm in diameter and 5 mm in height was fixed on the prepared surface and each filling material was inserted into the copper band, the hooking loop was inserted into filled material in the copper band before setting to make it easily that the load is applied on the specimen. After all specimens were immersed in water at $37^{\circ}C$ for 1 week, this specimen was placed on the load cell of tensile test apparatus, and specimen was pulled at the cross-head speed of 0.8 mm per minute. The following results were obtained 1) In glass ionomer cement, the bond strength obtained by 37% citric acid was higher than one obtained by 50% phosphoric acid in enamel and dentin surfaces. The bond strength obtained in non-etched surface was much less than one by etchants in enamel and dentin surface. 2) In Clearfil, the bond strength obtained by 40% phosphoric acid was 4 times more than one obtained by non etch ant. 3) In Concise, the bond strength obtained by 50% phosphoric acid was almost same as one obtained by 37% citric acid, and the bond strength obtained by non etch ant was much less than one obtained by etchants.