• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.10a
• /
• pp.3-8
• /
• 1998

The industrial revolution in England was based on the manufacturing systems by the power of water mill and rapidly progressed by the innovation of steam engine. It is no exaggeration to say that today's civilization is realized by the development of various types of power machinery, namely fluid machinery and heat engine. The electric energy is converted mainly from thermal energy (mainly steam) of mineral oil, coal and nuclear fuel through generator connected with steam turbine which is a kind of power machinery. There are various types of power machinery as shown in Tables 1a and 1b. They are classified into two types by use. One is absorption type of fluid and/or thermal energy, for examples, windmill and heat engine. The other is provision type of the energies for examples, pump, compressor and propulsion. By flow type, they are also classified by two types, turbo type and positive-displacement type. The turbo type began from water mill and windmill and evolve to steam turbine and finally to gas turbine. The positive-displacement type started from reciprocating water pump and developed into steam engine and changed to reciprocating combustion engine. The pumps and motors used in oil hydraulic system for power control are also positive-displacement type.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.6
• /
• pp.74-82
• /
• 1996

In this study, the characteristics of antiwashout underwater concrete according to the using types of admixture were experimentally investigated. Especially, the comparison on the performance of seven types(CO-A, B, C, D, E, F, G) of the manufactured admixtures was carried out in the same mixing condition and proportions. Based on the results of experiments, the conclusions were summarized as follows : (1) The slump flow on most of specimens except by CO-F type were progressed very well. (2) In most of products, the measured values of suspensions, pH's and air contents were lower than their reference values. However, CO-B, CO-F and CO-G types exceeded the reference ones in suspension and pH. (3) The time lags between initial and final setting were about three hours in most of tests, however, the maximum difference of total setting time was ten hours in comparing with the admixture types. The unit weights were mostly lower than $2300kg/m^3$ and the compressive strengths cured by salt water were about 80% of the ones by fresh water. (4) Finally, in spite of some problems, most of the manufactured admixtures may be performed well their functions in antiwashout under-water concrete if the using quantities are properly controlled by the site experiments.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1314-1319
• /
• 2011

This study was carried out to investigate the surface soil organic carbon fractions affecting by different land use types, including needle-leaf forest (FN), broad-leaf forest (FB), pasture, annual upland cropping land (upland), and paddy rice land (paddy). We chose seven regions across Korean inland, considering sea level altitude, and measured soil organic carbon content and physico-chemical properties such as bulk density at a depth of 0~15 cm using core samples in April for the each land use type. In addition, labile organic carbon fractions in soil including light fraction and hot water extractable carbon were investigated. From this study, organic carbon storage (Mg C per ha) in the upper 15-cm soils was highest in FB (37.8), and decreased in the order of pasture (29.1), FN (28.8), paddy (21.9), and upland crop (19.9). In forest, more than 20% of soil organic carbon existed as light fraction, the free organic matter. Hot-water extractable carbon contents of soils in five land use types were lower than 7% of their soil organic carbon content.

• Journal of Fashion Business
• /
• v.26 no.5
• /
• pp.122-134
• /
• 2022

This study is conducted on hardening leather with improved firmness and stability of shape, based on research on types and thickness of leather. The purpose of this study is to test the physical properties of the leather for molding to prepare the foundation for leather molding based on the test results using four methods by thickness of Vegetable and Split. The tests were conducted using a total of five leather types, including three types of vegetable leathers and two types of split, by thickness. Based on the testing method for leathers in KS M 6882, the tests were performed at 27℃ with relative humidity of 65±20%. The samples were prepared with cowhide, size 9cm× 2cm. The measurement parameters are length and width. thickness, volume, mass, density. Regarding the hardening treatment method, changes in appearance and major physical characteristics of leather were reviewed by soaking in hot water, dry heating, hammering, waxing, and olive oil coating. The study results are as follows. In planar works, it is judged that hardening work using a hammer is more suitable for stiffness or density in order to prevent easy breakage with adult muscle density, rather than boiling water or baking. In conclusion, there is no curling, soot, or breaking phenomenon, and the densest curing method is 50℃ for 20 sec of V2 and 75℃ for 60 sec of V2 in boiling water. The combination of paraffin treatment improve waterproof and quality.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2010

To dissipate the heat generated from the switching devices in the inverter system of HEV, the water cooling structure is proposed. The bolt type cooling structure has a problem such as water leakage for high pressure of water, therefore the proposed cooling structure applied pipe structure in the heat sink. The heat dissipation characteristics for various structures of water channel and distance between heat source and water channel was analyzed through the simulation. heat dissipation effect for two types of water cooling structures was investigated. Based on the simulation results, two types of water cooling system for 30kW inverter system of HEV were manufactured and the heat dissipation effect was verified.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.244-255
• /
• 2023

Patterns abstractly depicting flowing water with Chinese characters such as gong, wan(man), or wang continued endlessly and curved water patterns began appearing on textiles during the Song Dynasty. Though Song curved water patterns encompassed poetic sentiments such as "falling flowers and flowing water," the meaning faded with time, and these patterns were depicted in backgrounds with flowers added to brocade (Geum-sang-cheom-hwa). During the Ming and Qing Dynasties, combinations of diverse patterns, including flowers, butterflies, dragons, and auspicious treasures became fashionable, rather than the gong- and wan-shaped curved water patterns. Likewise, during the Joseon Dynasty, curved water patterns were preferred as background rather than as primary patterns. They were overlaid with flowers and clouds. The overlaid flower patterns included four-season flower patterns (17th-18th centuries), round flower patterns (19th century), and large flower patterns (20th century), which were identical to flower patterns fashionable at the time and arranged at intervals on complex curved water pattern backgrounds. In contrast, simple Ruyi types were more numerous than the four-Ruyi types fashionable at the time with regard to cloud patterns. Added here were Taiji (great ultimate symbol) or crane patterns, thus seeking to depict diverse auspicious Ruyi such as wish fulfillment and longevity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.298-302
• /
• 1994

This study is carried out in order to investigate to the physical property of Castella. The material is 19 kinds of Castella on the market in Kyushu area.As an result of the sensory evaluation for Castella, it could be classified into 3 types ; a) high grade, C) low grade, and B) midium grade.The results are summarized as follow. The water content of 3 type Castella was most 26-30% but Korea's was more lower . ΔE of A an dB type Castella was similiar , but A and C types was very different. in the Creep test, 3 types are all the 6-element Voigt model, consisting of Hookean body , Newtonian body and two sets of Voigt body. Eo of A type is 13-36% higher than other types. The parts of retardation strain of A type are 21-41% lower than B type, 8-13% higher than C type, respectively.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.467-479
• /
• 2013

This study was conducted to find out characterization of spatial distribution of birds observed in river areas. Our bird survey was carried out 4 times at 31 sites from January to September in 2011. A total of 1,609 accumulated individuals belonging to 59 species, 28 families and 11 orders were observed. In the result of spatial autocorrelation analysis using the richness index of the maximum counts of each sites, we confirmed that the distribution of birds in Namdaecheon river was clustered and the tendency of spatial autocorrelation was apparent. The area of each sites within a 200m radius was classified in four biotope categories such as agricultural land, forest, residential area and water area, and the spatial autocorrelation was analysed about four types. In the result of spatial autocorrelation analysis for four biotope categories, all types were showed the positive spatial autocorrelation, but the type of water area was higher than other types. The positive correlation was found between the water area and water birds in statistical significance. However, the forest birds had non-significance values. Therefore, it is appropriate to focus on water birds except for forest birds, when researches of bird distribution in river ecosystem is conducted. The number of bird species and individuals increased as the riverside of water area was to widen. Thus, if the areas of riverside offering the feeding and roosting area increase, it will be accommodated many birds. Also, the areas of riverside should be maintained naturally because it is an important habitats of birds. Our study area is on the outskirts the city of higher rates of forest and agricultural land, it may be unreasonable to apply our results to the whole rivers. If the research about the river flowing around the city will be conducted, it is expected to be useful to the relation study area such as ecological river's restoration.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.2
• /
• pp.25-37
• /
• 2014

The volcanic type of geothermal water is linked intimately to active or potentially active volcanoes and takes place near the plate boundaries. In contrast to the volcanic type, the geothermal water in Korea has a non-volcanic origin. Korea's geothermal water is classified into the residual magma (RM) type and deep groundwater (DG) type according to the criterion of $35^{\circ}C$. This study reviewed the relationship between the physical and chemical features of the 281 geothermal water sources in South Korea in terms of the specific capacity, water temperature, and chemical compositions of two different basements (igneous rock and metamorphic rock) as well as the geological structures. According to the spatial relationship between the geothermal holes and geological faults, the length of the major fault is considered a key parameter determining the movement to a deeper place and the temperature of geothermal water. A negligible relationship between the specific capacity (Q/s) and temperature was found for both the RM type and DG type with the greater specific capacities of the RM- and DG-igneous types than the RM- and DG-metamorphic types. No relationship was observed between Q/s and the chemical constituents ($K^+$, $Na^+$, $Ca^{2+}$, $Mg^{2+}$, $Zn^{2+}$, $Cl^-$, $SO_4{^{2-}}$, $HCO_3{^-}$, and $SiO_2$) in the DG-igneous and DG-metamorphic types. Furthermore, weak relationship between temperature and chemical constituents was found for both the RM type and DG type.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2161-2166
• /
• 2009

It is important for 0-6 hour nowcasting to provide for a high-quality initial condition in a meso-scale atmospheric model by a data assimilation of several observation data. The polarimetric radar data is expected to be assimilated into the forecast model, because the radar has a possibility of measurements of the types, the shapes, and the size distributions of hydrometeors. In this paper, an impact on rainfall prediction of the data assimilation of hydrometeor types (i.e. raindrop, graupel, snowflake, etc.) is evaluated. The observed information of hydrometeor types is estimated using the fuzzy logic algorism. As an implementation, the cloud-resolving nonhydrostatic atmospheric model, CReSS, which has detail microphysical processes, is employed as a forecast model. The local ensemble transform Kalman filter, LETKF, is used as a data assimilation method, which uses an ensemble of short-term forecasts to estimate the flowdependent background error covariance required in data assimilation. A heavy rainfall event occurred in Okinawa in 2008 is chosen as an application. As a result, the rainfall prediction accuracy in the assimilation case of both hydrometeor types and the Doppler velocity and the radar echo is improved by a comparison of the no assimilation case. The effects on rainfall prediction of the assimilation of hydrometeor types appear in longer prediction lead time compared with the effects of the assimilation of radar echo only.