• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.1035-1040
• /
• 2001

The effects of polymer-binder ratio and slag content on the properties of combined wet/dry-cured polymer-modified mortars using granulated blast-furnace slag (slag) are examined. As a result, the flexural and compressive strengths of polymer-modified mortar using slag reaches a maximum at a slag content of 40%, and is inclined to increase with increasing polymer-binder ratio. The water absorption, carbonation depth and chloride ion penetration depth tend to decrease with increasing polymer-binder ratio and slag content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.584-587
• /
• 2004

This research investigates the rheological behavior and the confined water ratio of the cement paste and binder condition in order to predict mix design proportion of the high flowing concrete. The purpose of this study is to determine the optimum replacement ratio of binders including fly ash, and lime stone powder by the cement weight. For this purpose, belite cement, blast furnace slag cement and ordinary portland cement are selected. As test results, the confined water ratio shows the following range ; OPC>blast furnace slag cement>belite cement. Therefore, belite cement is proved very excellent cementitious materials in a view point of the flowability. The optimum replacement ratio of lime stone powder is shown over $30\%$ in case of belite cement and about $10\%$ in case of slag cement type. Also, the optimum replacement ratio of fly ash is shown $30\%$ by the cement weight considering the confined water ratio and deformable coefficient of the paste condition.

• 한국재난정보학회 논문집
• /
• 제6권1호
• /
• pp.78-90
• /
• 2010

Exposure to the outside, the concrete is differential moisture distribution depending on the depth. Such a differential moisture distribution causes the differential drying shrinkage in concrete structures. This thesis is researched to compare the shrinkage of lightweight concrete depending on depth to normal concrete. It is used artificial lightweight aggregate which has 20% of pre-absorb value by lightweight concrete. When water-binder ratio is 30%, average shrinkage of lightweight concrete section decreased than normal concrete, but differential shrinkage of lightweight concrete section increased. However water-binder ratio is 40% and 50% average shrinkage and differential shrinkage of lightweight concrete section decreased than normal concrete.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.329-335
• /
• 2001

최근 고유동콘크리트에 관한 연구가 활발히 이루어지고 있으며, 건설현장에서의 시공사례도 발표되고 있다. 고유동콘크리트의 유동특성으로는 유동성, 충전성, 간극통과성, 재료분리저항성 등이 있으며, 이러한 고유동콘크리트의 유동특성은 물결합재비 단위수량 결합재량 등 여러 가지 요인에 의해 영향을 받는다. 본 연구는 고유동콘크리트의 특성에 미치는 물결합재비와 단위수량의 영향을 비교.분석하고자 하였다. 이를 위해 물결합재비(W/B : 0.30 0.35, 0.40, 0.45) 및 단위수량(W : 155, 165, 175, 185 kg/㎥)에 따른 고유동콘크리트의 배합을 선정하여, 굳지않은 콘크리트에서 슬럼프-플로우, V형깔때기, L형통과시험 등과 경화콘크리트에서 압축강도 및 동결융해시험 등을 실시하였다. 실험결과 본 논문대상의 경우 모든 물결합재비의 단위수량 175kg/㎥에서 일본 건축학회에서 제안하고 있는 슬럼프-플로우 50cm 통과시간 제안치인 3~8초를 만족시키는 적정한 점성을 나타냈으며, 물결합재비 0.35에서 가장 양호한 재료분리저항성을 나타내었다. 또한, 모든 배합에서 28일 양생후 340~710 kgf/㎤ 수준의 높은 압축강도를 발현하였으며, 공기연행제를 첨가한 고유동콘크리트에서 양호한 내동결융해성을 보여주었다.

• Computers and Concrete
• /
• 제3권5호
• /
• pp.357-373
• /
• 2006

The concepts of four parameters of nominal water-cement ratio, equivalent water-cement ratio, average paste thickness, fly ash-binder ratio were introduced. It was verified that the four parameters and the mix proportion of mortar can be transformed each other. The behaviors (strength, workability, et al.) of mortar primarily determined by the mix proportion of mortar now depend on the four parameters. The prediction models of strength and workability of mortar were built based on artificial neural networks (ANNs). The calculation models of average paste thickness and equivalent water-cement ratio of mortar can be obtained by the reversal deduction of the two prediction models, respectively. A mortar mix proportion design algorithm was proposed. The proposed mortar mix proportion design algorithm is expected to reduce the number of trial and error, save cost, laborers and time.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.30-35
• /
• 1998

This study was carried out to investigate quantitatively the relationship between the water binder ratio and the concrete strength using finely ground granulated furnace blast slag. In the experiment, the compressive strength and elastic modulus of concrete which slag contents are 0%, 10%, 20% and 30% at 7days and 28days age. As a result, the compressive strength have a high correlation with slag contents and water binder ratio. Thus, it is possible to calculate the water binder ratio using compressive strength of concrete contented with slag.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.130-137
• /
• 2013

본 연구는 실험계획법을 통하여 과산화수소로 발포된 석고 혼입 경량기포콘크리트로 통계적 분석을 실시하였다. 본 실험에서는 경량기포콘크리트를 구성하는 각 재료의 혼합비율을 실험인자로 설정하고, 실험을 통해 얻어진 반응변수에 대한 통계적 분석으로 역학적 특성을 평가 하였다. 실험인자는 석고혼입율, 물결합재비 및 발포제첨가비 이며, 반응변수는 겉보기밀도, 압축강도, 휨강도이다. 경량기포콘크리트의 배합은 반응표면설계의 Box-Behnken (B-B)계획법에 의해 총 15회의 실험점을 설정하였다. 본 연구결과 다음과 같은 결론을 얻었다. 반응변수에 대한 각 설명인자 (석고혼입율, 물결합재비, 발포제첨가비)의 유의확률값은 유의수준 ${\alpha}$=0.05에서 유의한 것으로 추정되었다. 경량기포콘크리트의 겉보기밀도에 대한 반응표면 분석 결과, 물결합재비 와 발포제첨가비만 유의 (${\alpha}$=0.05)한 것으로 추정되었으며, 겉보기밀도와 기포량 및 함수율과의 관계는 반비례함을 확인 알 수 있었다. 경량기포콘크리트의 압축강도에 대한 반응표면 분석 결과, 물결합재비, 발포제첨가비 및 발포제첨가비의 제곱항이 유의 (${\alpha}$=0.05)한 것으로 추정되었다. 경량기포콘크리트의 휨강도에 대한 반응표면 분석 결과, 물결합재비 와 발포제첨가비만 유의 (${\alpha}$=0.05)한 것으로 추정되었다. 다중 반응 최적법을 통해 반응변수들의 목표값을 만족하는 최적조건 영역을 확인할 수 있었다.

• Computers and Concrete
• /
• 제5권1호
• /
• pp.1-20
• /
• 2008

In this study, the effects and the interactions of water content, SP-binder ratio, and water-binder ratio on the workability performance of concrete were investigated. The experiments were designed based on flatted simplex-centroid experiment design modified from standard simplex-centroid one. The data gotten from the design was used to build the concrete slump model using neural networks. Research reported in this paper shows that a small number of slump experiments can be performed and meaningful data obtained with the experiment design. Such data would be suitable for building slump model using neural networks. The trained network can be satisfactorily used for exploring the effects of the components and their interactions on the workability of concrete. It has found that a high water content and a high SP/b ratio is essential for high workability, but achieving this by increasing these parameters will not in itself guarantee high workability. The w/b played a very important role in producing workability and had rather profound effects; however, the medium value about 0.4 is the best w/b to reach high slump without too much effort on trying to find the appropriate water content and SP/b.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.307-312
• /
• 1998

Recently the study on high flowing concrete which has high workability and Self-compacting is being proceeded actively in the university and corporative laboratory. There are some cases that has been applied to the field. This high flowing concrete has higher fluidity and segregation resistance than Plain of flowing concrete. And it is being focused as a remarkable know-how which can make high-quality concrete and reduction effect of labor force. This properties of high flowing concrete are influenced by the relationship of several factors; binder content, water binder ratio and unit water content. It is the aim of this study to propose reference data at mix design of high flowing concrete, after comparing and analyzing the fluidity and strength properties of high flowing concrete according to water binder content ratio and unit water content.

• 펄프종이기술
• /
• 제46권6호
• /
• pp.63-70
• /
• 2014

Part of SB latex in pre-coating color was substituted with newly developed starch-based bio-binder in order to investigate the effect of starch-based bio-binder in pre-coating color on the properties of coating color and coated paper. Smoothness and gloss of coated paper were decreased with the increase of bio-binder substitution ratio. Brightness and whiteness did not show the significant changes, but stiffness was improved with bio-binder. Ink set-off, dry-pick and wet pick were decreased with the increase of bio-binder substitution ratio. In general, when all SB latex is substituted with bio-binder, ink set-off, dry- and wet-pick were deteriorated. However, it was found that if the bio-binder substitution ratio is controlled below 50%, similar qualities with coated paper manufactured by the use of SB latex binder can be obtained.