• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.87-87
• /
• 2019

흔히 진흙으로 대표되는 점착성 유사는 모래와 같은 비점착성 유사와 달리 응집 현상으로 인해 지속적으로 유사 입자의 크기가 변화한다. 응집 현상은 점착성 유사 입자의 응집 과정과 파괴과정으로 구성된다. 응집 현상 중 응집 과정은 유사 입자 간의 충돌로 인해 발생하는 것으로 이해되며, 충돌을 야기하는 메커니즘으로는 브라운 운동(Brownian Motion), 차등침강(Differential Settling), 난류 전단 (Turbulent Flow Shear)이 있다. 파괴 과정은 입자간 충돌로 인해 깨지는 것이 아닌 난류 전단(Turbulent Shear)로 인한 덩어리 분리(Massive Splitting)가 발생하는 것으로 이해한다. 이러한 유체의 특성, 흐름 특성 (난류 거동) 뿐만 아니라 유사 입자의 특성 모두의 영향을 받으며 지속적인 응집 현상을 겪는 점착성 유사 입자들은 하나의 커다란 덩어리인 플럭(Floc)을 형성한다. 형성된 플럭의 구조는 프랙탈 기하학을 따르는 것으로 이해된다. 따라서 플럭의 구조는 자기 유사성을 띠며, 플럭의 밀도는 형성된 플럭 크기의 함수가 된다. 플럭의 크기가 증가할수록 플럭의 프랙탈 차원이 감소하며, 플럭의 밀도는 감소한다. 많은 이전의 연구에서 플럭의 침강 속도를 농도에 따른 함수로 가정하고 경험식을 이용하여 산정하나, 유사 입자의 침강 속도는 크기와 밀도의 함수임을 Stokes Law를 통해 생각해 볼 수 있다. 이에 본 연구에서는 응집 현상의 결과물로 형성된 응집물의 크기와 밀도를 각각 산정하고, Stokes Law를 이용하여 침강 속도와 응집물 크기의 관계에 대한 연구를 수행하고자 한다. 보다 심도 있는 연구를 위해서는 응집 현상을 야기하는 메커니즘에 대한 이해가 필수적이다. 간소화된 응집 모형으로부터 얻어진 플럭 크기를 이용하여 프랙탈 차원, 플럭의 밀도를 산정한다. 형성된 응집물의 크기와 침강 속도의 관계에 대한 이해를 통해 보다 정확한 플럭의 침강 속도 산정이 가능할 것으로 생각된다.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.180-185
• /
• 2023

To improve the efficiency of water electrolysis, it is essential to develop an oxygen evolution reaction (OER) electrocatalyst with high performance and long-term stability, accelerating the reaction rate of OER. In this study, a hollow metal-organic framework (MOF)-derived ruthenium-cobalt oxide catalyst was developed to synthesize an efficient OER electrocatalyst. As the synthesized catalyst increases the surface exposure of ruthenium, a low overpotential (386 mV) was observed at a current density of 10 mA/cm² with a low Tafel slope. It is expected to be able to replace noble metal catalysts by showing higher mass activity and stability than commercial RuO₂ catalysts.

• Journal of Surface Science and Engineering
• /
• v.56 no.3
• /
• pp.208-218
• /
• 2023

Photocatalysts are advanced materials which accelerate the photoreaction by providing ordinary reactions with other pathways. The catalysts have various advantages, such as low-cost, low operating temperature and pressure, and long-term use. They are applied to environmental and energy field, including the air and water purification, water splitting for hydrogen production, sterilization and self-cleaning surfaces. However, commercial photocatalysts only absorb ultraviolet light between 100 and 400 nm of wavelength which comprises only 5% in sunlight due to the wide band gap. In addition, rapid recombination of electron-hole pairs reduces the photocatalytic performance. Recently, studies on blackening photocatalysts by laser, thermal, and plasma treatments have been conducted to enhance the absorption of visible light and photocatalytic activity. The disordered structures could yield mid-gap states and vacancies could cause charge carrier trapping. Herein, liquid phase plasma (LPP) is adopted to synthesize Ag-doped black ZnO for the utilization of visible-light. The physical and chemical characteristics of the synthesized photocatalysts are analyzed by SEM/EDS, XRD, XPS and the optical properties of them are investigated using UV/Vis DRS and PL analyses. Lastly, the photocatalytic activity was evaluated using methylene blue as a pollutant.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.4
• /
• pp.388-396
• /
• 2023

Photoelectrochemical (PEC) water splitting is a vital source of clean and sustainable hydrogen energy. Moreover, the large-scale H₂ production is currently necessary, while long-term stability and high PEC activity still remain important issues. In this study, a GaN-based photoelectrode was modified by an additional NH₃ treatment (900℃ for 10 min) and its PEC behavior was monitored. The bare GaN exhibited a highly crystalline wurtzite structure with the (002) plane and the optical bandgap was approximately 3.2 eV. In comparison, the NH₃-treated GaN film exhibited slightly reduced crystallinity and a small improvement in light absorption, resulting from the lattice stress or cracks induced by the excessive N supply. The minor surface nanotexturing created more surface area, providing electroactive reacting sites. From the surface XPS analysis, the formation of an N-Ga-O phase on the surface region of the GaN film was confirmed, which suppressed the charge recombination process and the positive shift of E_FB. Therefore, these effects boosted the PEC activity of the NH₃-treated GaN film, with J values of approximately 0.35 and 0.78 mA·cm^-2 at 0.0 and 1.23 V_RHE, respectively, and an onset potential (V_on) of -0.24 V_RHE. In addition, there was an approximate 50% improvement in the J value within the highly applied potential region with a positive shift of V_on. This result could be explained by the increased nanotexturing on the surface structure, the newly formed defect/trap states correlated to the positive V_on shift, and the formation of a GaO_xN_1-x phase, which partially blocked the charge recombination reaction.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.113-117
• /
• 2016

Recently, hydrogen is regarded as important energy in the future, because it is clean and renewable. The photoelectrochemical (PEC) system, which produce hydrogen using water splitting by solar energy, is one of the most promising energy systems because it has abundant energy sources and good theoretical efficiency. GaN has recently been regarded as suitable photoelectrode that could be used to split water to generate hydrogen without extra bias because its band edge position include water redox potential ($V_{redox}=1.23$ vs. SHE). GaN also shows considerable corrosion resistance in aqueous solutions and it is possible to control its properties, such as structure, band gap, and catalyst characteristics, in order to improve solar energy conversion efficiency. But, even if the band edge position of GaN make PEC reaction facilitate without bias, the overpotential of oxygen evolution reaction could reduce the efficiency of system. One of the ways to decrease overpotential is introduction of co-catalyst on photoelectrode. In this paper, we will investigate the effect of manganese dioxide ($MnO_2$) as a co-catalyst. $MnO_2$ particles were dispersed on GaN photoelectrode by spincoater and analyzed properties of the PEC system using potentiostat (PARSTAT4000). After coating $MnO_2$, the flat-band potential ($V_{fb}$) and the onset voltage ($V_{onset}$) were moved negatively by 0.195 V and 0.116 V, respectively. The photocurrent density increased on $MnO_2$ coated sample and time dependence was also improved. These results showed $MnO_2$ has an effect as a co-catalyst and it would enhance the efficiency of overall PEC system.

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.439-446
• /
• 2013

The objective of this study is to evaluate the workability and various mechanical properties of heavyweight magnetite concrete and examine the reliability of the design equations specified in code provisions. The main parameters investigated were the water-to-cement ratio and substitution level of normal-weight coarse aggregate (granite) for magnetite. The oven-dried unit weight of concrete tested ranged between 2446 and $3426kg/m^3$. The measured mechanical properties included compressive strength development, stress-strain curve, splitting tensile strength, moduli of elasticity and rupture, and bond stress-slip relationship of concrete. Test results revealed that the initial slump of heavyweight magnetite concrete increased as the substitution level of normal-weight coarse aggregate increases. The substitution level of normal-weight coarse aggregate had little influence on the compressive strength and tensile resistance capacity of heavyweight concrete, while it significantly affected the modulus of elasticity and stress-strain curves of such concrete. The design equations of ACI 349-06 and CEB-FIP provisions mostly conservatively predicted the mechanical properties of heavyweight magnetite concrete, but the empirical equations for modulus of elasticity and splitting tensile strength need to be modified considering the unit weight of concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.1
• /
• pp.89-97
• /
• 2015

In bidding processes conducted by government agencies, local governments or public agencies, budget prices are critical to both ordering bodies and bidders since budget prices are bases for selecting a successful bidder. Since a high budget price goes against ordering bodies and a low one goes against bidders, most ordering bodies adopt a system using multiple preliminary prices for determining a budget price to ensure fair and transparent manners. Discussed are how budget prices change depending on the methods of sampling 15 preliminary prices and the methods of sampling 4 out of 15 prices. Computer simulation is conducted to analyze budget prices for various methods to determine multiple preliminary prices. It is more likely for budget prices to be close to base prices when splitting a range of generating preliminary prices into 15 intervals and taking 4 preliminary prices from 15 intervals than when taking 4 preliminary prices from a whole range. In cases when splitting a range of generating preliminary prices, if we take 2 preliminary prices out of intervals above 100% and take 2 out of intervals below 100%, the expected budget prices are equal to a base price and the standard deviations are about half in comparison with those when taking 4 out of 15 intervals.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.338-347
• /
• 2021

This paper aims to evaluating the interlayer strength of 3D-printed concrete with interlayer reinforcement. According to lap splices, two reinforcement methods were considered. One method did not include lap splices of interlayer reinforcement, but the other method included lap splices with length of 40mm. In addition, two different curing conditions were applied: air curing conditions and water curing conditions. The compressive, splitting tensile, and flexural tensile strengths of 3D-printed concrete specimens were measured in three loading directions with different reinforcement methods and curing conditions. Splitting and flexural tensile strengths decreased considerably when tensile stresses acted over the interlayers of 3D-printed concrete specimens. However, the flexural tensile strength or interlayer bonding strength of the printed specimens increased significantly at the interlayers when the longitudinal interlayer reinforcement penetrated printed layers. Interlayer bonding strength of printed concrete decreased after air curing treatment was applied because interlayers of printed concrete with more pores formed by the air cu ring conditions are more vulnerable to the load.

• Current Optics and Photonics
• /
• v.4 no.3
• /
• pp.174-185
• /
• 2020

Multiscattering occurs when a laser transmits into dense atmosphere targets (e.g. fogs, smoke or clouds), which can cause depolarization effects even though the scattering particles are spherical. In addition, multiscattering effects have additional information about microphysical properties of scatterers. Thus, multiscattering can be utilized to study the microphysical properties of the liquid water cloud. In this paper, a Monte Carlo method was used to simulate multi-scattering transmission properties of Lidar signals in the cloud. The results showed the slope of the degree of linear polarization (SLDLP) can be used to invert the extinction coefficient, and then the cloud effective size (CES) and the liquid water content (LWC) may be easily obtained by using the extinction coefficient and saturation of the degree of linear polarization (SADLP). Based on calculation results, a microphysical properties inversion method for a liquid cloud was presented. An innovative multiscattering polarization Lidar (MSPL) system was constructed to measure the LWC and CES of the liquid cloud, and a new method based on the polarization splitting ratio of the Polarization Beam Splitter (PBS) was developed to calibrate the polarization channels of MSPL. By analyzing the typical observation data of MSPL observation in the northern suburbs of Nanjing, China, the LWC and CES of the liquid water cloud were obtained. Comparisons between the results from the MSPL, MODIS and the Microwave radar data showed that, the microphysical properties of liquid cloud could be retrieved by combining our MSPL and the inversion method.

• Journal of the Korea Concrete Institute
• /
• v.20 no.3
• /
• pp.291-298
• /
• 2008

Cracks in concrete generally interconnect flow paths and increase concrete permeability. The increase in concrete permeability due to the progression of cracks allows more water or aggressive chemical ions to penetrate into concrete, facilitating deterioration. The goal of this research is to study the relationship between crack width and water permeability of cracked concrete. Tests have been carried out as a function of hydraulic pressure (0.1 $\sim$ 2 bar) and crack width (30 $\sim$ 100 ${\mu}m$). Splitting and reuniting method was used to manufacture cracked concrete specimens with controlled crack width. Crack widths are checked by using a microscope($\times$100). The results show a considerable increase of water transport with crack width and hydraulic pressure. When the crack width is smaller than 50${\mu}m$, the crack width has little effect on concrete permeability. Due to the autogenous healing, the water flow through the crack gradually reduces with time. When crack width is 100 ${\mu}m$ and hydraulic pressure increase from 0.1 bar to 0.25 bar, concrete permeability increases rapidly about 190 times according to the test results.