• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.1-5
• /
• 2018

본 연구에서는 InGaN/GaN multi quantum well (MQW)에서 Indium (In) 도핑효과에 따른 광전기화학적 특성을 관찰하였다. 기판으로는 Sapphire을 사용하였고, 각 Quantum well (QW)을 구성하고 있는 InGaN의 조성을 다르게 하였다. 투과도 측정 결과 일정한 In 조성을 가진 InGaN/GaN MQW에 비해 각 QW의 In 조성을 다르게 한 InGaN/GaN MQW에서 흡수도가 향상되는 것을 확인할 수 있었다. 이는 각각 다른 In 조성을 가진 InGaN 층이 더 넓은 영역의 스펙트럼 에너지를 가지는 빛을 흡수하기 때문인 것으로 생각된다. 광학적 특성을 평가하기 위해 진행한 상온 photoluminescence (PL) 실험을 진행한 결과, 역시 다양한 In 조성을 가진 InGaN/GaN MQW이 더 넓은 파장에서 발광이 나타나는 것을 확인할 수 있었다. 이들 샘플에 대한 광전기화학적 특성평가를 통하여, gradation In 조성을 가지고 있는 InGaN/GaN MQW이 일정한 In 조성을 가지는 InGaN/GaN MQW에 비해 광전기화학적 물분해 능력이 월등히 향상됨을 확인하였다.

• 한국재료학회지
• /
• 제26권11호
• /
• pp.604-610
• /
• 2016

We report on the fabrication and characterization of a novel $Cu_2O/CuO$ heterojunction structure with CuO nanorods embedded in $Cu_2O$ thin film as an efficient photocathode for photoelectrochemical (PEC) solar water splitting. A CuO nanorod array was first prepared on an indium-tin-oxide-coated glass substrate via a seed-mediated hydrothermal synthesis method; then, a $Cu_2O$ thin film was electrodeposited onto the CuO nanorod array to form an oxide semiconductor heterostructure. The crystalline phases and morphologies of the heterojunction materials were examined using X-ray diffraction and scanning electron microscopy, as well as Raman scattering. The PEC properties of the fabricated $Cu_2O/CuO$ heterojunction photocathode were evaluated by photocurrent conversion efficiency measurements under white light illumination. From the observed PEC current density versus voltage (J-V) behavior, the $Cu_2O/CuO$ photocathode was found to exhibit negligible dark current and high photocurrent density, e.g. $-1.05mA/cm^2$ at -0.6 V vs. $Hg/HgCl_2$ in $1mM\;Na_2SO_4$ electrolyte, revealing the effective operation of the oxide heterostructure. The photocurrent conversion efficiency of the $Cu_2O/CuO$ photocathode was estimated to be 1.27% at -0.6 V vs. $Hg/HgCl_2$. Moreover, the PEC current density versus time (J-T) profile measured at -0.5 V vs. $Hg/HgCl_2$ on the $Cu_2O/CuO$ photocathode indicated a 3-fold increase in the photocurrent density compared to that of a simple $Cu_2O$ thin film photocathode. The improved PEC performance was attributed to a certain synergistic effect of the bilayer heterostructure on the light absorption and electron-hole recombination processes.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.513-517
• /
• 2013

본 연구는 광 촉매로써 널리 사용되어 온 perovskite 결정인 $SrTiO_3$ 골격에 형광능력이 우수한 Nb을 일부 삽입한 $Nb_xSrTi_{1-x}O_3$를 합성하였고, Nb와 Ti의 몰 비율에 따른 물 분해로부터 수소제조 성능을 비교하고자 하였다. 제조한 $SrTiO_3$ 및 $Nb_xSrTi_{1-x}O_3$ 분말에 대한 물성평가는 X-선 회절분석법(XRD), 에너지 분산형 X-선 분광계(EDS), 자외선/가시선 분광계(UV/Vis-spectrometer)를 통해 분석하였다. 메탄올:물(1:1) 광분해 수소제조 실험 결과, $SrTiO_3$ 광 촉매보다 Nb이 0.05 mol% 첨가된 $Nb_{0.05}SrTi_{0.95}O_3$ 광 촉매에서 촉매활성이 가장 뛰어났으며, 특히 염기성 용액에서 더 많은 양의 수소가 발생하였으며 8시간 반응 후 수소의 발생 누적 량은 4.9 mL였다.

• Advances in concrete construction
• /
• 제16권6호
• /
• pp.277-290
• /
• 2023

In order to study the mechanical properties of basalt fiber reinforced ultra-fine fly ash concrete (BFUFARC), the effects of ultra-fine fly ash (UFA) content, basalt fiber content, basalt fiber length and water reducing agent content on the compressive strength, splitting tensile strength and flexural strength of the composite material were studied through experimental and theoretical analysis. Also, a scanning electron microscope (SEM) was employed to analyze the mesoscopic structure in the fracture surface of composite material specimens at magnifications of 500 and 3500. Besides, the energy release rate (G_c) and surface free energy (γ_s) of crack tip cracking on BFUFARC in different basalt fiber content were studied from the perspective of fracture mechanics. Further, the cracking resistance, reinforcement, and toughening mechanisms of basalt fibers on concrete substrate were revealed by surface free energy of BFUFARC. The experimental results indicated that basalt fiber content is the main influence factor on the splitting tensile strength of BFUFARC. In case that fiber content increased from 0 to 0.3%, the concrete surface free energy at the tip of single-sided crack showed a trend of increased at first and then decreased. The surface free energy reached at maximum, about 3.59 × 10^-5 MN/m. During the process of increasing fiber content from 0 to 0.1%, G_C-2_γS showed a gradually decreasing trend. As a result, an appropriate amount of basalt fiber can play a preventing cracking role by increasing the concrete surface free energy, further effectively improve the concrete splitting tensile performance.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.319-327
• /
• 2022

Ion exchange membranes have been developed from laboratory tools to industrial products with significant technical and trade impacts in the last 70 years. Today, ion exchange membranes are successfully applied for water and energy for different electro-membrane processes. Hydrogen could be produced by electrochemical water splitting using renewable energy, for example, solar, biomass, geothermal and wind energy. This review briefly summarizes the recent studies reporting the state-of-the-art anion-exchange membrane water electrolysis, especially focusing on the enhancement of the durability of anion-exchange membranes. Anion-exchange membrane water electrolysis could be used as inexpensive non-noble metal electrocatalysts that are capable of producing low cost of hydrogen. However, the main challenge of anion-exchange membrane water electrolysis is to increase the performance and durability. In this mini review, the limiting factors of the durability and the technology enhancing the durability will be discussed for anion exchange membrane water electrolysis.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.181-185
• /
• 2007

A free-surface correction(FSC) method is presented to solve the 3-D shallow water equations. Using the mode splitting process, FSC method can simulate shallow water flows under the hydrostatic assumption. For the hydrostatic pressure calculation, the momentum equations are firstly discretized using a semi-implicit scheme over the vertical direction leading to the tri-diagonal matrix systems. A semi-implicit scheme has been adopted to reduce the numerical instability caused by relatively small vertical length scale compare to horizontal one. and, as the free surface correction step the final horizontal velocity fields are corrected after the final surface elevations are obtained. Finally, the vertical final velocity fields can be calculated from the continuity equation. The numerical model is applied to the calculation of the simulation of flow fields in a rectangular open channel with the tidal influence. The comparisons with the analytical solutions show overall good agreements between the numerical results and analytical solutions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.336-339
• /
• 2004

This paper presents an experimental investigation examining water-cement ratio effects on fiber-matrix interface properties and on matrix fracture properties, which are used for designing mix proportion suitable for achieving strain-hardening behavior at a composite level. A single fiber pullout test and a wedge splitting test were employed to measure the bond properties in a matrix and the fracture toughness of mortar matrix, respectively. Test results showed that the properties tended to increase with decreasing water-cement ratio. Composite design using these test results will be discussed in the follow-up paper.

• Advances in concrete construction
• /
• 제2권2호
• /
• pp.77-89
• /
• 2014

The properties of fresh and hardened concrete made using three types of artificial cold bonded aggregates are determined. The properties, namely, slump, water absorption, compressive strength and splitting tensile strength of concrete containing artificial aggregate are reported. The variables considered are aggregate type and water-to-cement ratio. Three types of cold bonded aggregates are prepared using fly ash and quarry dust. The water-to-cement ratio of 0.35, 0.45, 0.55 and 0.65 is used. The test result indicates that artificial aggregates can be recommended for making the concrete up to a strength grade of 38 MPa. The use of quarry dust in the production of artificial aggregate mitigates environmental concerns on disposal problems of the dust. Hence, the alternate material proposed in this study is a green technology in concrete production.

• 청정기술
• /
• 제3권2호
• /
• pp.28-30
• /
• 1997

발효 아미노산을 분리하는 기존의 공정인 이온교환법에서 폐액 및 폐수처리에 따른 문제점을 해결하기 위한 새로운 분리공정으로 탈염 전기투석과 Water-splitting Electrodiaysis를 이용한 발효 아미노산의 분리 가능성 및 다양한 cell configuration과 막에 대한 성능 실험을 실시하였다. 실험결과 전기투석에 의해 경도물질을 제거한 후 양이온교환막과 bipolar 막으로 구성된 2-compartment WSED로 효과적으로 발효액에서 아미노산을 분리 할 수 있었으나 1가 양이온에 선택성을 지닌 양이온교환막으로는 아미노산의 분리가 어려움을 알 수 있었다.

• 세라미스트
• /
• 제23권2호
• /
• pp.178-183
• /
• 2020

Solar energy conversion is now actively researching because of pollution. Especially silicon photocatalyst has big potential, because of wide absorption range. But low quantum yield of silicon photocatalyst can't be used for commercialization. This paper summarize mechanism of silicon photocatalyst. In addition, properties and current states of photo catalyst using nanomaterials of silicon are also introduced.