• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.113-120
• /
• 2000

On the absorber of absorption chiller/heater, LiBr solution at high concentration is sprinkled on a bundle of horizontal tube cooled by cooling water. In this case, the conditions of LiBr solution and cooling water have an influence on heat/mass transfer coefficient in this system. Therefor it is important to find optimal operation conditions of absorption chiller/heater to save energy. Heat and mass transfer coefficient increased with the increase of solution flow rate, and also heat and mass transfer rate increased but overall heat and mass transfer coefficient decreased by increasing the solution concentration within the experimental range. The superheating of the solution resulted in superior heat transfer character to a state of equilibrium from the point of heat flux and overall heat transfer coefficient.

• 대한환경공학회지
• /
• 제38권11호
• /
• pp.627-634
• /
• 2016

본 연구에서는 탄소폼 흡착소재를 이용하여 산업도금폐수로부터 중금속을 흡착 제거한 후 탈착용액을 이용하여 제거된 중금속을 용출하고 회수하는 과정의 특성을 평가해 보고자 하였다. 용액의 조성에 따른 복합 중금속의 탈착 특성을 살펴본 결과 증류수 조건에서는 용출이 관측되지 않았으며, 탈착용액으로 HCl과 $H_2SO_4 $를 이용한 경우 높은 중금속 농도를 나타내었다. 탈착 용액을 이용함과 더불어 물리적 기술인 초음파 처리를 이용한 경우 중금속의 용출이 증진되는 것을 확인하였으며, 초음파 장치의 출력이 높고 반응 시간이 길수록 효율도 증가하는 것으로 나타났다. 탄소폼 흡착소재를 구리도금 세척수 처리에 적용시켜본 결과 200 반응기부피(Bed volume) 동안 안정적인 제거 성능을 나타내었으며, 흡착된 구리는 탈착용액을 이용하여 용출시킨 후 직류 전원 장치를 이용하여 회수할 수 있었다. 또한 구리가 회수된 탈착용액은 재이용 효율은 84.2%로 나타났다.

• 한국의류학회지
• /
• 제18권4호
• /
• pp.524-535
• /
• 1994

The interaction and detergency between oily soil and surfactant solution were studied Samples used were tristearin, tripalmitin and their mixture as a triglyceride, myristic acid as a fatty acid and sodium dodecyl sulfate (SDS) as surfactant. The results were as follows: 1. The mixtures of model oily soils were formed of eutectic point and their melting point were lower than them of individual oily soils. 2. The formation of liquid crystalline (LC) phase was recognized in the triangle phase diagram for SDS~ water~model oily soil system. The areas of LC phase region were in the order of SHS~ water~myristir acid> SDS~ water~mixture of tristearin, tripalmitin and myristic acid (TS/TP/M)>SDS~water~mixture of tristearin and tripalmitin (TS/TP) 3. The LC phase region expanded to wide concentration range of SDS solution and high concentration range of model oily soil with increasing temperature. Particularity, the LC phase region expanded highly at $30~40^{\circ}C$ but when the temperature was elevated above $40^{\circ}C$, expanding tendency decreased. 4. In the system of myristic acid and TS/TP/M contacted with SDS solution, the LC phase was already formed at $28^{\circ}C$ and the region of the LC phase were expanded with increasing temperature. But in the system of TS/TP contacted with SDS solution, the LC phase was not formed in whole experiment temperature. 5. The detergency of myristic acid was very high ann it was recognized that the formation of the LC phase played an important role in the detergency. The detergency of TS/TP was very for low, but when TS/TF was mixed with myristic acid, the detergency of TS/TP increased. It is supposed that the LC phase was formed butween SDS solution and myristic acid promoted to penetration of SDS solution into the inner parts of TS/TP.

• 한국물환경학회지
• /
• 제25권4호
• /
• pp.522-529
• /
• 2009

To supply safe drinking water to areas lacking in water supply and drainage system, such as rural area and military bases in proximity to Demilitarized Zone, effective method for treating organic contaminants such as MTBE is required. This study focuses on seeking optimal conditions for effective degradation of MTBE using a bath type ultrasound reactor. Effectiveness of MTBE degradation by ultrasound is dependent on the frequency, power, temperature, treatment volume, initial concentration, catalyst, etc. In this study the degradation rate of MTBE by ultrasound was proportional to power/unit volume ratio and removal is relatively more efficient for 0.1 mM than for 1 mM of MTBE solution. Efficiency of ultrasound treatment for 1 mM MTBE solution was enhanced under bath temperature of $30^{\circ}C$ compared to $4^{\circ}C$, but the temperature effect was negligible for 0.1 mM MTBE solution. Also for 0.1 mM MTBE solution, effect of catalyst such as $TiO_2$ and $Fe^0$ on treatment speed was negligible, and zeolite even increases the time taken for the degradation. Under these specific experimental conditions of this study, the most determinant factor for degradation rate of MTBE in solution was frequency and power of ultrasound. The results have shown that a continuous ultrasound reactor system can be used for small scale remediation of organically polluted groundwater, under optimal conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.304-310
• /
• 2001

A numerical model which simulates the heat and mass transfer processes within a counter-current plate type generator for ammonia/water absorption refrigerators was developed. Ammonia/water solution flows downward under gravity and ammonia/water vapor generated by flow boiling flows upward. The flow pattern within the generator was assumed to be a bubbly flow, and the liquid and vapor phase were assumed to be saturated. It was shown that the boiling of ammonia occurred mainly in the upper part of the generator. The effects of the generator length, the wall temperature and the mass flow rate of ammonia/water solution into the generator on the generation of ammonia/water vapor were investigated.

• Composites Research
• /
• 제26권3호
• /
• pp.165-169
• /
• 2013

This work presents the tensile properties and water uptake behavior of plasma treated abaca fibers reinforced epoxy composites. The composites were prepared by vacuum assisted resin transfer molding. The effects of treatment on tensile properties and sorption characteristics of abaca fiber composites in distilled water and salt solution at room temperature were investigated. The tensile strength of the composites increased with plasma treatment. With plasma treatment, an improvement of 92.9% was obtained in 2.5 min exposure time in plasma. This is attributed to high fiber-matrix compatibility. Less improvement on tensile properties of hybrid treatment of sodium hydroxide and plasma was obtained. However, both treatments reduced overall water uptake in distilled water and salt solution. Hydrophilicity of the fibers decreased upon plasma and sodium hydroxide treatment, which decreases water uptake.

• 한국임상약학회지
• /
• 제11권1호
• /
• pp.13-18
• /
• 2001

Omeprazole is usually administered as encapsulated enteric-coated granules and enteric-coated tablets because of its acid-labile nature. For children and patients who can not swallow, it can be mixed with water or other liquid after a capsule is opened or a tablet is crushed. This study was performed to compare omeprazole liquid formulations of tablet and capsule Omeprazole 20 mg capsule containing enteric coated granules was opened and 20 mg entric-coated tablet was ground to be mixed with sodium bicarbonate solution, orange juice or water. Each liquid formulation was poured into dissolution tester, mixed with first solution (artificial gastric juice; pH 1.2) for two hours, then with second solution (artifical enteric juice; pH 6.8) for thirty minutes. pH was measured periodically for two and half hours. Samples were drawn periodically, mixed with lansoprazole as an internal standard, and injected to HPLC. As results, pH of sodium bicarbonate solution of omeprazole was significantly higher than that of orange juice or water in first solution (6.2-7.4 vs. 1.2, p<0.005). At 150 min, concentrations of omeprazole in three diluents with granules and in sodium bicarbonate solution of tablet powder sustained significantly higher than in other solution of tablet powder (p<0.001). In conclusion, enteric-coated granules from capsule with three diluents and powder from tablet in sodium bicarbonate solution was stable during dissolution test, which would be appropriate and recommended for patient who can not swallow solid preparations.

• 생물환경조절학회지
• /
• 제5권1호
• /
• pp.65-70
• /
• 1996

1. 배양액의 EC(mS/cm)와 배양액의 수분포텐셜은 직선적인 관계가 있고, EC의 증가는 배양액의 수분포텐셜 저하로 나타났으며 이에 따라 상위엽의 수분포텐셜이나 침투포텐셜이 변화하는 경향을 보였다. 2. 물리화학, 열역학적인 지표가 되는 수분포텐셜($\phi$w)은 배양액 뿐만 아니라 식물의 근, 경, 엽 및 과실에서의 수분 상태를 동일 단위로 나타내는 것으로 식물의 생장을 제어할 때 유일한 지표인 것으로 나타났다. 3. 배양액의 수분포텐셜 저하에 따라 상위엽의 수분포텐셜이나 침투포텐셜이 저하하는 경향을 보였다. 4. 배지내 Cu 농도가 5$\mu\textrm{m}$이상으로 되면 생육, 지상부의 생체중, 지하부의 건물중, 엽록소 함유율이 동시에 급격히 저하하는 경향을 보였다. 5. 배지내 Cu 농도의 증가에 따라서 생장율의 저하가 나타났으며 생장율의 저하에 따라 상위엽의 수분포텐셜이 저하하는 경향을 보였다. 팽압은 처리에 관계없이 거의 일정하게 나타나 팽압과 배지내 배양액의 Cu 농도 스트레스간에는 직접적으로 관계가 없는 것으로 나타났다. 수분포텐셜($\psi$w)은 식물신장, 세포신장을 수적으로 표현하는 것이 가능하다. 수원이 되는 용액이나 배지, 식물체를 동일 단위(㎫)로 관찰하는 것이 가능해 식물체의 수분생리적 비교 검사를 위한 유효한 방법으로 생각되었다.

• 한국물환경학회지
• /
• 제36권5호
• /
• pp.453-467
• /
• 2020

This study aimed to inventory the water pollutant discharge of wastewater from two facilities, one primary steel manufacturing facility and one petroleum refinery, both of which are located in Korea, and to identify ways to improve the wastewater treatment process through field investigation. Probability evaluation was used to inventory the substances in polluted water. The samples collected in this study included original wastewater, on processing wastewater, and treated water. The general description of wastewater occurrence, major sources, and treatment facilities were also investigated to obtain an integrated database of the pollutants created by different industrial categories. Based on our analysis of raw wastewater and final effluent, the detected pollutants were confirmed by analyzing their presence in the raw or supplemental materials, the potential of formation as byproducts, and the possibility of inclusion as impurities. The compounds detected for each category were screened via investigation of their possible sources and confirmed as the final water pollutant inventories. Thirty kinds of water pollutants were emitted by the primary steel manufacturing facility (reference in case A), including 14 specified hazardous water pollutants. The petroleum refinery (reference in case B) emitted 36 water pollutants, including 16 specified hazardous water pollutants.

• 한국식품영양학회지
• /
• 제19권4호
• /
• pp.358-365
• /
• 2006

두께 1 mm의 감자 절편을 분자량 200에서 6000까지의 PEG용액에 침지했을 때 PEG의 분자량이 작을 수록 초기 탈수 속도가 빨랐으나 최종 탈수량은 PEG 분자량이 클수록 증가하여 PEG 6000인 경우 초기수분의 약 80%까지 탈수되었다. 감자절편을 저분자 용액인 NaCl, PEG400 용액에 침지한 경우, 조직의 뒤틀림 현상은 나타나지 않고 plasmolysis가 일어나면서 탈수와 부피가 감소되는 반면, PEG 600 용액에 침지시부터 조직의 뒤틀림 현상이 동반된 탈수 현상이 나타났으며, 고분자 용액인 PEG 4000 용액에 침지한 경우 cytonhysis 현상을 동반한 탈수와 부피 감소가 더욱 분명하게 관찰되었다. 초기 탈수 속도는 저분자 용액에 침지 시 더 빨랐으나 최종 탈수량은 고분자용액에 침지 시 더 컸으며 탈수량이 역전되는 시기는 cytorrhysis가 일어나는 시기와 일치하였다. 따라서 고분자 용질의 고농도 용액에 시료를 침지하면 용질의 함침량은 적게 하면서 탈수량을 증가시킬 수 있음을 알 수 있었다.