• Journal of the Korean Geotechnical Society
• /
• v.31 no.7
• /
• pp.13-28
• /
• 2015

This study extended the Lee et al.'s (2015a) solution which improved the existing analytical solution for prediction of the residual pore water pressure into progressive wave and flow coexisting field. At this time, the variation of incident wave period and wave length should be incorporated to Lee et al.'s (2015a) analytical solution, which does not consider flow. For the case of infinite thickness, the new analytical solution using Fourier series was compared to the analytical solution using Laplace transformation proposed by Jeng and Seymour (2007). It was verified that the new solution was identical to the Jeng and Seymour's solution. After verification of the new analytical solution, the residual pore water pressure head was examined closely under various given values of flow velocity's magnitude, direction, incident wave's period and seabed thickness. In each proposed analytical solution, asymptotic approach to shallow depth with the changes in the soil thickness within finite soil thickness was found possible, but not to infinite depth. It is also identified that there exists a discrepancy case between the results obtained from the finite and the infinite seabed thicknesses even on the same soil depth.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.200-206
• /
• 1998

The effect of surface tension and viscosity of polymer solution on the thickness of water casting membranes was studied. Spreading of polymer solutions on water surface was governed by the surface tension and viscosity of the polymer solution. The thickness of water casting membrane was affected by these two factors. The properties, mentioned above, were proportional to the polymer concentration. The order of magnitude in surface tension was PVC>PS>CA and that of viscosity was CA>PS>PVC. The difference of surface tension between water and polymer solution acts as driving force for spreading of polymer solution, but the viscosity as resistance. The thickness of polymeric membrane prepared by water casting was PS>CA>PVC. The order of membrane thickness was not as same as that of surface tension. This phenomena were due to the viscosity which acts as more effective spreading resistance than the surface tension.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.285-292
• /
• 2021

Osmotic power is to produce electric power by using the chemical potential of two flows with the difference of salinity. Water permeates through a semipermeable membrane from a low concentration feed solution to a high concentration draw solution due to osmotic pressure. In a pressure retarded osmosis (PRO) process, river water and wastewater are commonly used as low salinity feed solution, whereas seawater and brine from the SWRO plant are employed as draw solution. During the PRO process using wastewater effluent as feed solution, PRO membrane fouling is usually caused by the convective or diffusive transport of PRO which is the most critical step of PRO membrane in order to prevent membrane fouling. The main objective of this study is to assess the PRO membrane fouling reduction by pretreatment to remove organic matter using coagulation-UF membrane process. The experimental results obtained from the pretreatment test showed that the optimum ferric chloride and PAC dosage for removal of organic matter applied for the coagulation and adsorption process was 50 mg/L as FeCl₃ (optimum pH 5.5). Coagulation-UF pretreatment process was higher removal efficiency of organic matter, as also resulting in the substantial improvement of water flux of PRO membrane.

• Journal of Korea Water Resources Association
• /
• v.41 no.7
• /
• pp.669-679
• /
• 2008

The present study examines similarity of behavior between an overtopping wave generated by a plunging wave and a dam-break flow through hydraulic model tests. The dam-break flow has been employed to estimate the overtopping effect on the basis of the dam-break flow's behavior similar to the overtopping. In this study, the overtopping velocity was measured by a modified image technique using bubble and bubble texture images called bubble image velocitmetry. From the measurements, the vertical profiles of horizontal overtopping velocity at cross-sections along the deck were presented and discussed. Maximum velocity and depth-averaged velocity at each cross-section were compared with an analytical solution solving the dam-break flow, Ritter's solution. The initial water depth of importance for the solution was determined from the tested wave condition and the overtopping measurements. The comparison shows that the solution with the initial water depth estimated using the front velocity of the overtopping wave is in good agreements with the measurements.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.37-40
• /
• 2001

This study was carried out to investigate the optimum condition for silk sericin collection from degumming solution using some aluminium salts with various treatment conditions and examine the thermal properties of silk sericin collected from degumming solution. Silk sericin was precipitated by treatment of aluminium metal compound from degumming solution. The best optimum collecting conditions of silk sericin from degumming solution are the concentration of 2 $m\ell$/l of polyaluminium chloride (PAC), pH range of 5~7 and room temperature. The reduction of water pollution was evaluated by decreasing the chemical oxygen demand (COD) and nitrate ion (NO$_3$￣). Thermal stability of silk sericin collected from degumming solution was a little lower than that of hot water.

• Journal of Korean Society for Quality Management
• /
• v.5 no.1
• /
• pp.23-29
• /
• 1977

Geometric programming is very useful for the solution of certain nonlinear programming problems in which the objective function and the constraints are posynomial expressions. By solving the dual program, it can be obtained that the solution of the primal program of Geometric programming. And, more efficient solution is to form an Augmented program possessing degree of difficult zero. A regional water-quality management problem may involve a multistage constrained optimization with many decision variables. In this problem, especially, appling that solution to it is also useful. This paper is described that : 1) the efficient solution of a water-quality management model formed by Geometric programming and 2) the algorithm developed to apply easily a real system by modifing and simplifing the solution.

• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.56-61
• /
• 1997

The silk fibroin solution was prepared and applied to the surface of fabrics for the purpose of weighting as well as a surface modification. The water-soluble fibroin solution can be obtained by dissolving the cocoon fibroin in a boiling solution of 50% calcium chloride for 60 minutes. For the fixation of a water soluble fibroin onto the fabric surface, the various methods were investigated. The fixation can be achieved on a silk fabric by the after treatment with ethanol, stannous choride and methacrylamide. On the other hand, the epichlorhydrin compound is the most promising fixation agent for a cotton fabric. As a result of the examination of property changes, the softness and crease recovery were lessened for a silk crepe fabric by treating with 1-2% fibroin solution, while those properties were improved for a silk knit fabric.

• Animal cells and systems
• /
• v.1 no.2
• /
• pp.337-340
• /
• 1997

The purpose of this study is to evaluate whether water soluble chitosan, a natural nontoxic chelator, can reduce fetal contamination of radiostrontium in pregnant mice. Various forms of water soluble chitosans (10% or 1% powder, or 1% solution) were given to pregnant mice before or after contamination of 0.005 uCi/B.W(g) Sr-85. Transplacental transfer of Sr-85 to fetus was $6.8{\pm}2.7%$ of injected dose, when Sr-85 was administered at the 20th day of pregnancy. Fetal radioactivity was significantly reduced when mother mice were treated with water soluble chitosan before contamination of Sr-85. Water soluble chitosans of 10% or 1% powder, or 1% solution significantly reduced fetal retention of Sr-85 to $2.3{\pm}0.7%$, $2.7{\pm}0.8%$, and $2.0{\pm}0.9%$, respectively. However, fetal contamination was not reduced, when water soluble chitosans of 10% or 1% powder, or 1% solution were administered after maternal contamination of Sr-85. From these data we can conclude that water soluble chitosan could reduce fetal contamination of radiostrontium in pregnant mice, when given before the pregnant mice were exposed to radiostrontium.

• Membrane and Water Treatment
• /
• v.6 no.2
• /
• pp.141-160
• /
• 2015

This study aims to investigate the impacts of chemical cleaning on the performance of a reverse osmosis membrane. Chemicals used for simulating membrane cleaning include a surfactant (sodium dodecyl sulfate, SDS), a chelating agent (ethylenediaminetetraacetic acid, EDTA), and two proprietary cleaning formulations namely MC3 and MC11. The impact of sequential exposure to multiple membrane cleaning solutions was also examined. Water permeability and the rejection of boron and sodium were investigated under various water fluxes, temperatures and feedwater pH. Changes in the membrane performance were systematically explained based on the changes in the charge density, hydrophobicity and chemical structure of the membrane surface. The experimental results show that membrane cleaning can significantly alter the hydrophobicity and water permeability of the membrane; however, its impacts on the rejections of boron and sodium are marginal. Although the presence of surfactant or chelating agent may cause decreases in the rejection, solution pH is the key factor responsible for the loss of membrane separation and changes in the surface properties. The impact of solution pH on the water permeability can be reversed by applying a subsequent cleaning with the opposite pH condition. Nevertheless, the impacts of solution pH on boron and sodium rejections are irreversible in most cases.

• Corrosion Science and Technology
• /
• v.8 no.3
• /
• pp.126-131
• /
• 2009

The interaction between wear and corrosion can significantly increase total material losses in water chemistry environment. The corrosive wear tests of a PWR steam generator tube material (Alloy 690) against the anti vibration bar material (409 SS) were performed at room temperature. The tests were performed in alkaline water chemistry conditions. NaOH solution was selected for test condition to investigate the corrosive wear effect of steam generator tube material in alkaline pH condition without other factors. The flow induced vibration can caused tube damage and the corrosion can be occurred by water chemistry. The test results showed that, in the alkaline solution at pH 13.9, the corrosion current density was increased about ten times than that in the distilled water. And wear rate at pH 13.9 was increased about ten times from that at neutral condition. However, the wear rate was decreased with time. The decrease would be attributed to the change in roughness of specimen or sub-layer of the worn surface with time. From microstructure observation, severe abrasive shape and several wear debris were found. From those results, it could infer that the oxide film on Alloy 690 changed to easily breakable one in the alkaline water, and then abrasion with corrosion became the main wear mechanism.