• 제목/요약/키워드: Water pump

검색결과 1,496건 처리시간 0.035초

Center Array-Sequencing 위상펼침 기법의 MR 온도영상 적용에 관한 기초연구 (Preliminary Study on the MR Temperature Mapping using Center Array-Sequencing Phase Unwrapping Algorithm)

  • ;김태형;천송이;한용희;최기승;이광식;전재량;은충기;문치웅
    • Investigative Magnetic Resonance Imaging
    • /
    • 제12권2호
    • /
    • pp.131-141
    • /
    • 2008
  • 목적: 물체 내부의 온도를 비침습적으로 측정할 수 있는 양성자 공명 주파수 이동에 의한 MR 온도영상의 재구성에 center array-sequencing 위상펼침(PU) 기법을 적용시켜 그 성능 및 유용성을 평가하고자 하였다. 대상 및 방법: MR 온도 영상에 앞서 잡음 수준이 다른 타원형 팬텀들을 컴퓨터 모의 실험으로 제작하고 제안된 PU방 법을 적용시켜 잡음에 대한 성능을 평가하였다. MR 실험은 PU 실험과 이를 이용한 온도분포영상획득 실험으로 구분하여 수행되었다. 1.5T MR 영상장치에서 무릎코일과 $T2^*$ 경사자장에코 펄스열을 이용하여 MR 영상을 얻었다. 물통, 오렌지, 아가젤 등의 팬텀을 실험 대상으로 하였고 자체 제작된 온수펌프 장치로 팬텀의 온도를 조절하였다. T 형 열전쌍 온도측정장치로 팬텀 온도를 측정하고 MR 온도영상 결과와 비교하였다. 획득된 MR영상의 위상분포는 제안된 PU방법으로 위상을 편 후 온도분포 영상을 재구성하였다. 가열 전 후의 온도변화와 MR 영상의 위상변화 관계를 이용하여 아가젤 팬텀 내의 MR온도분포 영상을 구하였다. 결과: 제안된 center array-sequencing PU 알고리즘을 이용하여 여러 팬텀에 대한 MR 위상영상의 접힘 현상을 기존 방법보다 간편하고 빠르게 제거할 수 있었고 이를 이용하여 MR 온도영상을 획득할 수 있었다. 결론: 본 연구는 제안된 center array-sequencing 위상펼침 방법이 잡음에 강하고 처리 속도가 빠를 뿐만 아니라 양성자 공명 주파수 이동의 성질을 이용한 MR 온도 영상 획득에 성공적으로 적용될 수 있음을 보였다.

  • PDF

Noncondensable gas's influence in waster vapor absorption accompanying interfacial disturbance into aqueous solution of LiBr

  • Dong-Ho RIE;Keun-Oh Lee
    • 한국안전학회지
    • /
    • 제7권2호
    • /
    • pp.63-70
    • /
    • 1992
  • 흡수식 열펌프에서 폭 넓게 사용되고 있는 대표적인 냉매/흡수용액은 $H_2O$ / LiBr 계이다 그러나, LiBr 수용액의 점성계수는 LiBr의 농도가 커짐에 따라 증가하기 때문에, LiBr수용액의 농용액 영역에서 물질확산계수가 감소한다. 이 결점을 보완하기 위해 흡수용액에 계면활성제를 첨가시키므로서 흡수를 촉진시키는 방식을 이용하고 있다. 계면활성제의 첨가에 의한 흡수용액의 열 및 물질이동 촉진에 관한 연구는 계면활성제 첨가농도에 의해 흡수용액의 표면상에서 게면활성제가 액적으로 존재하는 계면활성제 포화용해도 이상의 조건에서 발생하는 마랑고니대류가 효과적이다. 이 흡수촉진효과는 냉매증기의 흡수시 흡수용액표면상의 분포한 계면활성제와 흡수용액사이의 표면장력차에 기인하는 계면교한 현상에 기인한다. 그러나, 이흡수촉지효과는 냉매증기의 흡수가 일어나는 흡수기 내부의 不안정상태, 즉, 불응축성가스(공기)가 존재하지 않는 조건하에서 이루어지며, 불응축성가스가 흡수촉진저하(열 및 물질이동의 저하)에 기인하는 연구는 보고된 바 없다. 이러한 불응축성가스가 흡수기 내부에 존재할 때 계면교한의 거동 및 열 및 물질이동저하현상을 파악하기 위하여 계면활성제 농도변화(포화용해도 이상 및 이하의 두 조건)에 따른 증기흡수 실험 및 계면교한가시화 실험을 행하였다. 결과적으로 본실험을 통하여 불응축성가스가 수증기흡수에 끼치는 영향을 파악(계면교란의 악화) 첨가시의 흡수량과 不安定상태(불응축성가스가 존재시)의 증기흡수량의 비교에 의해 급격한 증기흡수저하가 不安定상태하에서 발생함으로서 불응축성가스가 흡수촉진효과(계면교한현상)을 저해시키는 결론을 얻었다.es and facts obtained by the expenence in this area, respectively. Both depth-first search and backward chaining schemes are used in reasoning process. This expert system is written in an artificial intelligence language "PROLOG", and its availability is demonstrated through the case study.e함량은 감소되었으며 sulfhydryl기가 증가됨에 따라서 disulfide groups은 감소되는 경향을 보였고 ascorbic acid는 열처리 온도뿐만 아니라 시간과도 관련이 있음을 알 수 있었다. 저온 살균유와 초고온 살균유 사이에서는 지표물질들의 함량이 다소 차이가 있음을 볼 수 있었다.담시간이 구체적으로 기술되지 않았으며, 고유한 언어를 통역하는 과정에서 의미론적 문제에 대한 고려가 부족하였다. 면접과 기록과정에서 보면 자료의 기록과정과 분류 및 분석과정이 명시되어 있지 않았다. 참여관찰과 면접방법을 사용시 이에 대한 자세한 기술이 되어 있지 않았다. 5. 연구결과의 적용 및 이에 대한 논의는 상당히 제한되어 있었는데, 수편의 연구만이 방법론 문제점과 앞으로의 연구분야에 대한 전망을 제시하였으며, 특이한 것은 어 떤 연구자도 이른 개발을 위한 적용 및 임상실무적 차원에서 간호에 대한 제언을 하지 않았다.유모델변수들은 유입-유출 자료들로부터 평가할 수 있으며, 이를 위해서 본 논문에서는 Gauss-Newton 방법을 이용한 Bard

  • PDF

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

핵융합 배가스 중 CQ4와 Q2O 처리공정 제안 및 HAZOP 분석 (Process Suggestion and HAZOP Analysis for CQ4 and Q2O in Nuclear Fusion Exhaust Gas)

  • 정우찬;정필갑;김정원;문흥만;장민호;윤세훈;우인성
    • Korean Chemical Engineering Research
    • /
    • 제56권2호
    • /
    • pp.169-175
    • /
    • 2018
  • 본 연구는 핵융합 배가스 중 삼중수소가 포함된 화합물인 메탄($CQ_4$) 및 물($Q_2O$)로부터 수소동위원소를 회수하기 위한 공정에 관한 것이다(Q는 수소, 중수소, 삼중수소). 수증기-메탄 개질반응과 수성가스 전환반응을 이용하여 $CQ_4$$Q_2O$$Q_2$로 변환시키고, 후속하는 팔라듐 분리막으로 생성된 $Q_2$를 회수한다. 본 연구에서는 $CQ_4$$Q_2O$ 중 하나의 물질인 $CH_4$$H_2O$로부터 수소 회수를 위해 촉매반응기, 팔라듐 분리막, 순환펌프로 구성된 순환루프를 적용하였다. 촉매반응온도 및 순환유량을 변화시켜가며 $CH_4$$H_2O$의 전환율을 측정하였다. $CH_4$ 중 수소 회수는 촉매반응온도 $650^{\circ}C$, 순환유량 2.0 L/min 조건에서 99% 이상의 $CH_4$ 전환율을확인하였고, $H_2O$ 중수소 회수는촉매반응온도 $375^{\circ}C$, 순환유량 1.8 L/min 조건에서 96% 이상의 $H_2O$ 전환율을 확인하였다. 이와 더불어, 향후 핵융합 실증로(K-DEMO)에서의 $CQ_4$ 발생량을 예측하고, 이에 대한 처리공정을 제안하였으며, HAZOP (Hazard and Operability) 분석을 실시하여 공정의 위험요소와 운전상의 문제점을 도출하고 해결방안을 제시하였다.

다중 수증기/이산화탄소 프로파일 관측 시스템의 원리와 활용 (Principles and Applications of Multi-Level H2O/CO2 Profile Measurement System)

  • 유재일;이동호;홍진규;김준
    • 한국농림기상학회지
    • /
    • 제11권1호
    • /
    • pp.27-38
    • /
    • 2009
  • 연직으로 여러 높이에서 측정된 기체의 농도는 다양한 목적에 활용될 수 있다. 예를 들어, 복잡지형에 위치한 우리나라의 일반적인 산림유역에서 에디공분산방법에 의한 증발산 및 이산화탄소 순생태 교환량(Net Ecosystem Exchange, NEE)을 관측하기 위해서는 수평 및 연직 이류(advection)와 저류(storage)항의 효과를 정량화해야 한다. 그리고 미량 기체의 발원 및 흡원을 추적하거나 관측의 발자국 분석을 위해서도 필요하다. 수증기와 이산화탄소의 연직 농도 분포는 일반적으로 에디공분산 플럭스 타워에 보조 장치로 설치되는 다중 기체 프로파일 관측시스템(이하 프로파일 시스템)에 의해 측정된다. 이 시스템은 다른 미기상 관측기기와는 달리 서로 독립된 여러 기기와 장치들이 하나의 목적을 위해 결합되어 작동되기 때문에 사용방법과 기기의 운영/유지/보수에 많은 어려움이 따른다. 현재 전세계적으로 플럭스 타워 관측과 함께 이용되고 있는 프로파일 시스템은 대부분 미국의 캠벨사(Campbell Sci. Inc.)에서 제작/판매하는 시스템과 개별 연구자들이 각자의 목적과 관측환경에 적합하도록 자체 제작한 시스템으로 구분된다. 연세대학교 대기과학과 생물기상/생지화학 연구팀은 2005년부터 광릉 산림유역의 활엽수림과 침엽수림에 미국 캠벨사에서 제작한 두 개의 프로파일 시스템을 설치/운영하며 다양한 기술적, 이론적 경험과 지식을 축적해 왔다. 이 총설에서는 복잡지형 산림에서의 물과 탄소의 순생태 교환량 관측에 중요한 도구로 사용되는 프로파일 시스템의 원리, 구성, 활용 방법에 대해서 소개한다.

압력구배의 주기적 변화에 따른 한외여과 Flux의 변화 (Response of Ultrafiltration Flux to Periodic Oscillations in Transmembrane Pressure Gradient)

  • 서창우;이은규
    • KSBB Journal
    • /
    • 제14권2호
    • /
    • pp.230-234
    • /
    • 1999
  • 한외여과공정에서 압력구배를 주기적으로 변화시켜 막 표면의 용질층을 불안정화시켜 여과 flux의 총괄적 향상을 유도한 실험을 수행하였다. 일정압력에서의 여과 flux 감소현상을 Hernia 식을 사용하여 모사하였고, 또한 압력구배의 주기적 변화를 Fourer series로 표현하여 압력구배의 변화에 따른 flux 변화를 수학적으로 모사하였고 이 결과를 실제의 실험결과와 비교하여 보았다. 수학적 모사결과 압력변화의 형태, 진폭, 주기 등의 변화에 따른 평균 flux의 변화는 미미하였다. 하지만 실제실험결과 주기적으로 압력구배를 변화시킨 경우 약 11%의 향상을 관찰할 수 있었다. 이는 압력구배가 주기적으로 변하는 과정에서의 응질층의 압축이완속도가 다른 것에 기인하는 것으로 유추된다. 주기적 압력구배변화외에 feed pump interruption을 이용하여 평균총괄 flux를 약 32%까지 향상 시켰다. 역확산에 의한 용질층의 이완에는 일정한 시간이 필요함을 찾아내었고 interruption은 용질층이 형성되기 전부터 시작하는 것이 유리하다고 판단되었다. 본 실험을 위하여 한외여과의 자동제어 시스템을 설계제작하여 다양한 압력함수를 이용할 수 있었고, 공정운영 중 압력구매와 여과 flux를 실시간 모니터링 및 제어할 수 있었다. 자동제어 시스템을 통해 압력구매를 주기적으로 변화시켜 총괄 flux의 극대화를 도모하는 기법은 기존장치를 최소로 변경시키면서 한외여과성능을 극대화시킬 수 있는 방법으로 기대된다.

  • PDF

멸치초망 어업의 조업자동화 시스템 개발 (I) -챗대 조작용 유압 권양기 개발- (Development of the Automatic Fishing System for the Anchovy Scoop nets (I) - The hydraulic winder device for the boom control -)

  • 박성욱;배봉성;서두옥
    • 수산해양기술연구
    • /
    • 제36권3호
    • /
    • pp.166-174
    • /
    • 2000
  • 멸치초망용 챗대의 유압 권양장치를 개발하기 위하여 모형 챗대와 그물을 실물의 1/5크기로 제작하여 챗대를 권양할 때의 장력을 측정하고, 이를 토대로 권양기 3종을 설계 제작하여 그 성능을 시험한 결과를 요약하면 다음과 같다. 1. 챗대를 건양하는데 가장 큰 장력이 작용할 때는 챗대 끝이 수면 하 4m에 있을 때이었고, 이 때 챗대줄에 작용하는 장력은 187.5kgf이었다. 2. 멸치초망 어업에 적합한 권양기의 조건은 어탐중 챗대가 움직이지 않아야 하며, 그 방법으로 감속기나 전자브레이크를 장치하는 것보다 시간 경과에 따른 누수량이 적은 것을 사용하는 것이 바람직하였다. 3. 시험에 사용된 권양기 중 최적의 권양기에 있어서 압력차 $\Delta$P를 130kgf/$\textrm{cm}^2$으로 고정하였을 때, 권양기에 감겨지는 챗대줄의 권양속도는 2m/sec로서 재래식 방법보다 0.48m/sec 빠르게 나타났으며, 양망당 약 1.6톤의 멸치를 어획할 수 있다. 4. 권양기 2대를 설치함으로써 조업인원 2명을 절감할 수 있었다.

  • PDF

선천성(先天性) 심장병(心臟病)의 개심술(開心術) -6례(例) 수술경험(手術經驗) - (Open Heart Surgery for Six Cases of the Conegnital Heart Disease)

  • 이성행;이성구;한승세;이길노;김송명;이광숙;이종국
    • Journal of Chest Surgery
    • /
    • 제9권2호
    • /
    • pp.220-238
    • /
    • 1976
  • Six cases of congenital heart disease were operated on by means of cardiopulmonary bypass between December, 1975 and April, 1976. Two cases of ventricular septal defects (VSD), two cases of VSD, associated with ruptured aneurysm of sinus Valsalva, two cases of atrial septal defects (ASD) and one case of pulmonic stenosis with patent ductus arteriosus were operated. Sarns roller pumps and Bentley Temptrol oxygenators were used for extracorporeal circulation. Pump oxygenator was primed with Ringer's lactate solution, 5% dextrose in water, mannitol, and ACD blood. Flow rate ranged from 2.0 to $2.4L/M^2/min$. Bicarbonate was added to the oxygenator with estimated amount as 15 mEq/L/hr. Venous catheters were introduced into superior and inferior vena cava, and oxygenated blood was returned to the body through aortic cannula inserted into ascending aorta. Moderate hypothermia ($30^{\circ}C$) was induced by core cooling. Aorta was cross clamped for 15 minutes and released for 3 minutes, and repeated clamping when necessary. Atrial and ventricular septal efects were closed by direct sutures. Aneurysms of sinus Valsalva ruptured into the right ventricle were repaired through right ventriculotomy by d:rect closure with Dacron patch reinforcement. Cardiopulmonary bypass time varied from 66 to 209 minutes, and aorta cross clamping time ranged from 13 to 56 minutes. Postoperative bleeding was minimal except one case who needed for evacuation of substernal hematoma. Intra- and postoperative urinary output was satisfactory. Acid-base balance, partial pressure of $O_2$, electrolytes, and hematological changes during intra- and post-perfusion period remained at the acceptable ranges. No mortality was experienced.

  • PDF

RF Power에 따른 태양전지용 N-type ZnS 특성연구 (A Study on Properties of N-type ZnS Deposited at Various RF Power for Solar Cell Applications)

  • 양현훈;김한울;정운조;이석호;소순열;박계춘;이진;정해덕
    • 한국전기전자재료학회논문지
    • /
    • 제24권7호
    • /
    • pp.574-577
    • /
    • 2011
  • In this study, we use the $2.5cm{\times}7.5cm$ soda lime glass as the substrate. We used the ultrasonicator. Glass was dipped in the acetone, methanol and DI water respectively for 10 minutes. Ar(99.99%)gas was used as the sputtering gas. We varied the RF power between 100~175 W with 25 W steps. Base pressure was kept by turbo molecular pump at $3.0{\times}10^{-6}$ torr. Working pressure was kept by injection of Ar gas. ZnS thin films were deposited with the radio frequency magnetron sputtering technique at various temperatures and sputtering powers. It is also clearly observed that, the intensity of the (111) XRD peak increases with increasing the RF power. Electrical properties were measured by hall effect methods at room temperature. The resistivity, carrier concentration, and hall mobility of ZnS deposited on glass substrate as a function of sputtering power. It can be seen that as the sputtering power increase from 100 to 175 W, the resistivity of the films on glass decreased significantly from $8.1{\times}10^{-2}$ to $1.2{\times}10^{-3}\;{\Omega}{\cdot}cm$. This behavior could be explained by the effect of the sputtering power on the mobility and carrier concentration. When the RF power increases, the carrier concentration increases slightly while the resistivity decreases significantly. These variation originate from improved crystallinity and enhanced substitutional doping as the sputtering power increases.

36 MTD급 천연가스 BOG 재액화 플랜트 기본설계 (Basic Design of 36 MTD Class Natural Gas BOG Re-Liquefaction System)

  • 고준석;박성제;김기덕;홍용주;고득용;김효봉;염한길
    • 대한기계학회논문집 C: 기술과 교육
    • /
    • 제1권1호
    • /
    • pp.99-105
    • /
    • 2013
  • LNG 극저온기계기술 시험인증센터에 구축되는 LNG 선박용 펌프 및 압축기 성능시험에서 발생하는 증발가스는 안전을 위하여 전량 회수가 요구된다. 본 논문에서는 36 MTD 용량의 천연가스 재액화 시스템에 대한 기본 설계 연구를 수행하였다. 대기압, $-60^{\circ}C$, 일반적인 도시가스 조성비, 1,500 kg/hr 유량의 공급 가스를 기본 설계 조건으로 하여 공정 설계가 이루어졌고, 입구 온도 조건 및 가스 조성비에 따른 LNG 생산량 또한 계산하여 다양한 입구 설계 조건에 따른 시스템의 성능 변화를 비교, 분석하였다. 공정 설계 외에도 재액화 시스템의 핵심 기기인 송풍기, 압축기, 극저온 열교환기, 컴팬더의 제작 사양이 도출되었으며, 전력 및 냉각수의 유틸리티 요구조건 또한 기본 설계를 통해 도출되었다.