• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1435-1441
• /
• 2003

Combustion characteristics on diesel-water emulsion are analyzed in high pressure injection for several variables such as water content, injection pressure and injection timing. As a fact of well-known, maximum combustion pressure was decreased and ignition delay was elongated in accordance with increasing of water content. But these characteristics were enhanced with increase of injection pressure to high pressure. It was shown that combustion of neat diesel in case of injecting with 600bar is similar to that of 20 % diesel-water emulsion was injected at 1200 bar.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.25-32
• /
• 1999

This study was carried out to reduce NOx emissions from diesel engine and to investigate the variation of engine performance using the water injection. In this study the water was extracted from the exhaust gas and injected directly into the intake port with the inlet charge. The water condensing system operated as a closed system without any supplementary water supply. The experimental parameters such as the revolution the torque and the water injection rate are varied and the result from this experiment found the significant NOx reduction whereas the smoke emission increases as water/air ratio increases as the cases like the EGR. In spite of increasing the quantity of the water injection the engine output was slightly decreased and the specific fuel consumption was increased as was anticipated. Especially the system was founded to be effective on the reduction of the NOx emissions at the high load region relatively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권2호
• /
• pp.278-286
• /
• 2018

Objective: Two experiments were conducted to evaluate vitamin $D_3$ administration to nursery pigs by injection or in drinking water on serum 25-hydroxycholecalciferol ($25-OHD_3$) concentrations. Methods: At weaning, 51 pigs (27 and 24 pigs in experiments 1 and 2, respectively) were allotted to vitamin $D_3$ treatments. Treatments in experiment 1 were: i) control (CON), no vitamin administration beyond that in the diet, ii) intramuscular (IM) injection of 40,000 IU of vitamin $D_3$ at weaning, and iii) water administration, 5,493 IU of vitamin $D_3/L$ drinking water for 14 d post-weaning. Treatments in experiment 2 were: i) control (CON), no vitamin administration, and ii) water administration, 92 IU of $d-{\alpha}-tocopherol$ and 5,493 IU of vitamin $D_3/L$ drinking water for 28 d post-weaning. The lightest 2 pigs within each pen were IM injected with an additional 1,000 IU of $d-{\alpha}-tocopherol$, 100,000 IU of retinyl palmitate, and 100,000 IU of vitamin $D_3$. Results: In both experiments, serum $25-OHD_3$ was changed after vitamin $D_3$ administration (p<0.05). In experiment 1, injection and water groups had greater values than CON group through d 35 and 21 post-administration, respectively (p<0.05). In experiment 2, serum values peaked at d 3 post-administration in the injection groups regardless of water treatments (p<0.05) whereas CON and water-only groups had peaks at d 14 and 28 post-administration, respectively (p<0.05). Even though the injection groups had greater serum $25-OHD_3$ concentrations than the non-injection groups through d 7 post-administration regardless of water treatments (p<0.05), the water-only group had greater values than the injection-only group from d 21 post-administration onward (p<0.05). Conclusion: Serum $25-OHD_3$ concentrations in pigs increased either by vitamin $D_3$ injection or drinking water administration. Although a single vitamin $D_3$ injection enhanced serum $25-OHD_3$ concentrations greater than water administration in the initial period post-administration, a continuous supply of vitamin $D_3$ via drinking water could maintain higher serum values than the single injection.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1640-1647
• /
• 2004

This study was to investigate the effects of water induction through the air intake system on the characteristics of combustion and exhaust emissions in an IDI diesel engine. The fuel injection timing was also controlled to investigate a method for the simultaneous reduction of smoke and NOx when water was injected into the combustion chamber. The formation of NOx was significantly suppressed by decreasing the gas peak temperature during the initial combustion process because the water played a role as a heat sink during evaporating in the combustion chamber, while the smoke was slightly increased with increased water amount. Also, NOx emission was significantly decreased with increase in water amount. A simultaneous reduction in smoke and NOx emissions was obtained when water was injected into the combustion chamber by retarding more 2$^{\circ}C$A of the fuel injection timing than without water injection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2186-2191
• /
• 2003

This study is to investigate the effects of water induction through the air intake system on the characteristics of combustion and exhaust emissions in diesel engine. The effects of water induction through the air intake port were considered in IDI diesel engine in this study. The formation of NOx was significantly suppressed by decreasing the gas peak temperature during the initial combustion process because the water play a role as a heat sink during evaporating in the combustion chamber, but the smoke was slightly increased with increased water amount. Also, NOx significantly decreased with increase in water amount. A simultaneous reduction in smoke and NOx emissions can be obtained when water is injected into the combustion chamber by retarding the fuel injection timing more than without water injection.

• 한국전산유체공학회지
• /
• 제12권3호
• /
• pp.8-12
• /
• 2007

An optimized bidet nozzle design to form the required swirl water jet is proposed with the help of numerical analysis. The bidet can do the cleaning process of human body by water injection and the speed/pressure/injection angle/magnitude of swirl intensity of water jet determine the cleaning capability and personal subjective feeling. The objective of this research is to design optimal water injection nozzle to make stable swirl intensity. The effect of individual design variables are analyzed from the basic design and the final design is deduced to make high performance water jet within the pre-determined operation conditions.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.68-71
• /
• 2007

An optimized bidet nozzle design to form the required swirl water jet is proposed with the help of numerical analysis. The bidet can do the cleaning process of human body by water injection and the speed/pressure/injection angle/magnitude of swirl intensity of water jet determine the cleaning capability and personal subjective feeling. The objective of this research is to design optimal water injection nozzle to make stable swirl intensity. The effect of individual design variables are analyzed from the basic design and the final design is deduced to make high performance water jet within the pre-determined operation conditions.

• 항공우주기술
• /
• 제10권1호
• /
• pp.129-135
• /
• 2011

본 연구는 중앙 물분사 방식을 채택한 액체로켓엔진 후류의 냉각에 대해 전산유체역학을 통한 특성을 고찰하였다. 중앙 물분사 방식의 냉각은 측면 물분사 방식과는 달리, 잘 알려져 있지 않기 때문에 다양한 물분사량과 유량을 통해 효율적으로 후류를 냉각시킬 수 있는 조건을 찾았으며, 해석을 통해 후류의 변화 특성을 살펴보았다. 이로부터 물분사 유량이 총추진제 유량의 2배 이상, 위치는 L/De=1.2일 때가 적당함을 알 수 있었다.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.25-32
• /
• 2004

We have carried out laboratory measurements of P-wave velocity and deformation strain during $CO_2$ injection into a porous sandstone sample, in dry and water-saturated conditions. The rock sample was cylindrical, with the axis normal to the bedding plane, and fluid injection was performed from one end. Using a piezoelectric transducer array system, we mapped fluid movement during injection of distilled water into dry sandstone, and of gaseous, liquid, and supercritical $CO_2$ into a water-saturated sample. The velocity changes caused by water injection ranged from $5.61\;to\;7.52\%$. The velocity changes caused by $CO_2$ injection are typically about $-6\%$, and about $-10\%$ for injection of supercritical $CO_2$, Such changes in velocity show that the seismic method may be useful in mapping $CO_2$ movement in the subsurface. Strain normal to the bedding plane was greater than strain parallel to the bedding plane during $CO_2$ injection; injection of supercritical $CO_2$ showed a particularly strong effect. Strain changes suggest the possibility of monitoring rock mass deformation by using borehole tiltmeters at geological sequestration sites. We also found differences associated with $CO_2$ phases in velocity and strain changes during injection.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권7호
• /
• pp.823-832
• /
• 2007

This paper presents the static characteristics of EGR-WI combined system. The water injection system was statically characterized by recording the engine exhaust outlet $NO_x$ emissions for comparison with baseline $NO_x$ emissions. Effects of the water injection system on CO and HC emissions and fuel consumption were examined. The research engine used for these experiments was a 103 kW turbocharged, intercooled, 2.5 L VM Motori CIDI engine equipped with a cooled EGR system. Water injection in the intake system demonstrated the potential for significant reductions in engine outlet $NO_x$ emissions. The system has reduced engine outlet $NO_x$ emissions by 40-50%, but caused significant increases in CO and HC emissions, particularly at low loads. Fuel consumption effects were minimal.