Bae, Min A;Kim, Kyeong Ho;Lee, Man Sig;Baek, Jae Ho
Journal of the Korea Academia-Industrial cooperation Society
/
v.21
no.10
/
pp.574-580
/
2020
An inorganic binder is eco-friendly because it can be cured at low temperatures and does not emit harmful gases. In addition, related research is progressing rapidly owing to the small defects in the core. On the other hand, inorganic binders based on silicates (SiO2-Na2O) have unique absorbent properties. This results in the absorption of moisture from the air and the weakening of the bonding force. In particular, the castings used in cast steel require high-strength properties because of the higher temperatures than aluminum castings. In this study, waxes containing ester groups were selected to improve the absorption of moisture of inorganic binders. The inorganic binder was characterized by X-ray fluorescence and thermogravimetric analysis-differential thermal analysis. The inorganic binder core strength was then evaluated. In the case of an inorganic binder containing wax, the water resistance increased to 216 N/㎠, confirming the up to 55% improvement in strength. Excellent casting characteristics were confirmed through steel castings.
Taticchi, A.;Bartocci, S.;Servili, M.;Di Giovanni, S.;Pauselli, M.;Mourvaki, E.;Zilio, D. Meo;Terramoccia, S.
Asian-Australasian Journal of Animal Sciences
/
v.30
no.11
/
pp.1605-1611
/
2017
Objective: Following a previous report, an experiment was conducted to determine the effect of increasing level of dried stoned olives pomaces (DSOP) in the diet of lactating buffaloes on milk and mozzarella cheese yield and characteristics. Methods: Sixteen pluriparous buffaloes distributed into two groups were fed an isoenergetic (0.9 milk forage unit/kg) and isoprotein (149 g/kg dry matter [DM] of crude protein) diet, with or without DSOP. Each animal received 17 kg DM/d. Samples of forages and concentrates were weekly collected and used for duplicate chemical analyses. Individual milk samples from each control were analyzed for chemical and coagulating parameters and daily production of mozzarella cheese was estimated. At the end of the trial, bulk milk of each group was processed to produce mozzarella cheese and chemical (fat, protein, ash, pH) composition, fatty acids composition, carotenoids and tocopherols content were determined. A sensory test was also performed. The oxidative stability was measured on mozzarella cheese and on governing liquid. Results: No significant differences were observed, neither for milk yield and body condition score, nor for milk characteristics. The fat was higher (p<0.05) in mozzarella of DSOP fed group but, saturated fatty acids were lower and unsaturated higher (p<0.01). Furthermore, lower atherogenic (p<0.01), and thrombogenic (p<0.05) indices were found in mozzarella cheese of DSOP fed group. In addition, the administration of DSOP did not affect the mozzarella cheese oxidative stability and no negative effect was found in the sensory properties. Conclusion: No contraindications appeared for the inclusion of DSOP in the diet of lactating buffaloes. Besides, important effects on mozzarella cheese quality were obtained, such as a modification of fat content and attributes with an increment in the mono-unsaturated. Additionally, a lower saturated/unsaturated ratio and atherogenic and thrombogenic indices suggest an improvement of dietetic and nutritional characteristics of mozzarella cheese.
The purpose of this study is to determine the effect of aromatherapy, showing how the composition handling of aromatherapy and abdominal massage treatment reaches body ingredient transformation. The subjects for this research were total 18 middle-aged females in Seoul; aroma massage group of 7 females, aroma inhalation and water bathe group of 5 females, abdominal massage group of 6 females by jojoba oil without any medical effect. This clinic trial was held from July 1, 2008 to Aug.14, 2008. I held this clinic trial under the same condition after and before this clinic. A standard tape and OLYMPIA 3.5 of S hospital were used at the body measuring for subjects after and before clinic trials. I got Average and standard deviation by data analysis by SPSS Win. Ver.14.0. I did paired t-test for the comparison of before and after, and repeated measure ANOVA for between two groups or among three groups'. The verification was held Duncan Test. The results of this study were as follows: 1. Body mass quotient (F=2.86, p= .063) and Body region (F=1.34, p= .279) among three groups showed no meaningful difference, but weight meaningful difference and aroma massage group showed the greatest difference of body measure change quantity. 2. In change quantity of abdomen girth, Waist circumference and WHR, abdomen girth (F=4.56, p= .012) and Waist circumference (F=4.37, p= .031) showed a meaningful statistical difference. The result of subsequent inspection showed that there was a meaningful difference among three groups and aroma massage group was best. 3. In Cell quantity, Body region quantity and Muscle volume, Body region quantity (F=2.76, p= .182) and Muscle volume (F=3.12, p= .054) showed no difference, but Cell quantity (F=3.79, p= .040) showed a meaningful difference. In the comparison of three groups there was no difference, but aromatherapy group showed more change quantity than any other group. According to the result of this study, the composition handling of aromatherapy and body massage was effective in the decrease of Abdominal fatness and Waist circumference, Weight and the increase of Cell quantity. so I suggest that woman use this therapy in the program of obesity management for her health improvement.
This study is intended to know what is the legal problems to settlement and public announcement of property right for construction of marine architectural building in Korea. Firstly, the situation and the prospect around marine architectural building are examined Secondly, the legal concepts of marine architectural building and the application of related laws are analyzed. Thirdly, the problems related to public announcement of property right of marine architectural building are suggested. Fourthly, some improvement schemes to solve the legal problems in relation with property right of buildings on the water at sea and ocean are proposed. As the conclusion, the marine architectural building can be divided into fixed-type and floating-type in order to find the proper way to handle the public announcement of property right for that sort of building. The fixed-typecan be registered as real estate according to the Building Law through the amendment of the existing related laws. But for the registration of floating-type building a new law should be made. In the near future, improvements on the legal system related with the settlement of property right of marine architectural building should be made, so that private sectors can join construction and operation of the building. Especially a new law for the floating-type marine architectural building should be made as soon as possible.
Kim, Seongtak;Park, Sungeun;Kim, Young Do;Kim, Hyunho;Bae, Soohyun;Park, Hyomin;Lee, Hae-Seok;Kim, Donghwan
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.490.2-490.2
/
2014
Since the general solar cells accept sun light at the front side, excluding the electrode area, electrons move from the emitter to the front electrode and start to collect at the grid edge. Thus the edge of gridline can be important for electrical properties of screen-printed silicon solar cells. In this study, the improvement of electrical properties in screen-printed crystalline silicon solar cells by contact treatment of grid edge was investigated. The samples with $60{\Omega}/{\square}$ and $70{\Omega}/{\square}$ emitter were prepared. After front side of samples was deposited by SiNx commercial Ag paste and Al paste were printed at front side and rear side respectively. Each sample was co-fired between $670^{\circ}C$ and $780^{\circ}C$ in the rapid thermal processing (RTP). After the firing process, the cells were dipped in 2.5% hydrofluoric acid (HF) at room temperature for various times under 60 seconds and then rinsed in deionized water. (This is called "contact treatment") After dipping in HF for a certain period, the samples from each firing condition were compared by measurement. Cell performances were measured by Suns-Voc, solar simulator, the transfer length method and a field emission scanning electron microscope. According to HF treatment, once the thin glass layer at the grid edge was etched, the current transport was changed from tunneling via Ag colloids in the glass layer to direct transport via Ag colloids between the Ag bulk and the emitter. Thus, the transfer length as well as the specific contact resistance decreased. For more details a model of the current path was proposed to explain the effect of HF treatment at the edge of the Ag grid. It is expected that HF treatment may help to improve the contact of high sheet-resistance emitter as well as the contact of a high specific contact resistance.
Journal of the Korea Institute of Building Construction
/
v.17
no.5
/
pp.453-463
/
2017
Due to the increase in the size of buildings and scale, the importance of construction engineering that reflects the constructability from the design stage of the project is increasing. Especially, engineering efforts related to facilities, equipment and construction methods for temporary work at the design stage can significantly contribute to improvement of constructability and project performance. The purpose of this study is to derive construction engineering tasks on temporary work at the design phase of the high-rise building projects. 27 preliminary tasks were firstly investigated through literature review and experts' group interview, and the necessity and importance analysis of each tasks were then performed based on questionnaire survey. Most of the tasks related to plans on structural framework and lifting equipment were analyzed as relatively more important ones. Lastly, 21 engineering tasks, which are classified into 5 factors, were proposed through factor analysis. The factors were determined as 1) structural framework, measurement and circulation, 2) lifting equipment and pumping, 3) space zoning, 4) water supply, 5) temporary facility, electric power supply and lighting. The results of this study can be used as basic data for establishing efficient work process of construction engineering on temporary work at the design phase.
The catalytic combustion of toluene over Pd-Cu/USY zeolite has been examined by using FT-IR spectroscopy in a closed system under dry and humid conditions. The catalytic combustion of toluene (700 ppmv) in the temperature range of $80-220^{\circ}C$ has been investigated by using a fixed bed reactor. The Pd-Cu/USY catalyst showed the highest catalytic performance with respects to the PdO-CuO/USY and Pd/USY. Comparing to $PdO/Al_2O_3$ catalysts, the slight improvement in conversion was observed over PdO/USY catalysts under humid condition since USY zeolite is hydrophobic substrate and water give an additional oxygen source to zeolite surface like oxygen. The reduced catalysts showed more enhanced catalytic activity due to the reduced activation energy of combustion of toluene than oxidized catalysts such as PdO/USY and PdO-CuO/USY.
Nitrification performance of fixed film biofilters using coarse sand, loess bead, or styrofoam beads in biofilter columns 1 meter high and 30cm in diameter were studied at different hydraulic and organic matter loading rates. Synthetic wastewater was supplied to the culture tank in order to maintain desired TAN concentrations in inlet water to biofilters. All the biofilters were conditioned 5 months before start of sampling. TAN and $NO_2-N$ conversion rates increased with an increase in the hydraulic loading rate (HLR). However, the improvement in biofilter performance was not linearly correlated to HLR in styrofoam bead filters. This is mainly due to the characteristics of the styrofoam beads used. TAN conversion rates of sand filters increased with the increase of HLR up to $200m^3/m^2$. per day. No increase in the TAN conversion rate was observed at the highest HLR since flooding on the media surface took place. HLR had a significant impact on the TAN conversion rates in loess bead filter up to the highest HLR tested (P<0.05). TAN conversion rates were much less at organic matter loading rates of 9 and 18kg $O_2/m^3$ per day than those without the addition of organic matter in styrofoam bead filters. The addition of glucose resulted in a reduction of the TAN conversion rate from 540 to 284g $TAN/m^3$ per day. No significant difference of TAN conversion rates between the two organic matter loading rates was found (p<0.05). This indicates that the impact of organic matter on nitrification becomes less and less sensitive with an increase in the COD/TAN ratio. At an organic matter loading rate of 9kg $O_2/m^3$. per day, a great reduction of TAN conversion rates was observed in sand filters and loess bead filters. Clearly, organic matter can be one of the most Important Impacting factors on nitrification. $NO_2-N$ conversion rates showed a similar trend for TAN. Based on the TAN and nitrite conversion rates, styrofoam beads showed the best performance among the three filter media tested. Also, the low gravity and price of styrofoam beads make the handling easier and more cost-effective for commercial application. The results obtained at the highest organic matter loading rates can be used in the biofilter design in recirculating aquaculture system.
The soil textures and chemical compositions of Tapes Philippinarum beds were investigated in order to estimate the grade of the habitat soil of T. Philippinarum for the improvement of natural tidal flats. The coefficients of correlation between tile percentages of debris, coarse sand, fine sand, silt, and clay of the habitat soil, and the population density of T. Philippinarum were 0.78, 0.73, -0.42, -0.68, and -0.51 respectively. And the optimum levels of same were above $13.5\%,\;above\;23.0\%\;below\;41.5\%,\;below\;10.0\%$, and below $6.8\%$ respectively The $SiO_2\;Al_2O_3+Fe_2O_3$ ratio of the soil of T. Philippinarum beds showed the range of 5.09 to 5.60. The levels of soil pH, water holding capacity, organic matter, total nitrogen, available phosphorus, exchangeable magnesium were 6.15-6.60, $4.26-6.86\%$, $0.40-1.10\%$ 14.0-27.0 ppm, $0.041-0.394\%,\;and\;0.009-0.132\%$ respectively.
Kim, Hangeun;Kim, Hye Rim;Jeong, Bong jun;Lee, Seung Su;Kim, Tae-Rahk;Jeong, Ji Hye;Lee, Miyeong;Lee, Sinai;Lee, Jong Suk;Chung, Dae Kyun
Journal of Microbiology and Biotechnology
/
v.25
no.1
/
pp.74-80
/
2015
Skin is the soft outer covering of vertebrates that provides protection from pathogenic infection, physical damage, or UV irradiation, and controls body temperature and water content. In this study, we examined the effects of oral intake of kimchi-derived Lactobacillus plantarum K8 lysates on skin moisturizing. In an in vitro study, we observed that the hyaluronic acid content increased in HaCaT cells treated with L. plantarum K8 lysates. Oral administration of L. plantarum K8 lysates effectively attenuated the horny layer formation and decreased epidermal thickening in DNCB-treated SKH-1 hairless mice skin. The damage to barrier function was reduced after 8 weeks of oral administration of L. plantarum K8 lysates as compared with that in the atopic dermatitis mice. For the test with volunteers, we manufactured experimental candy containing 2.1% L. plantarum K8 lysates, while control candy did not contain bacterial lysate. A significant increase in hydration in the experimental candy-administered group as compared with the control candy-administered group was observed on the face after 4 and 8 weeks, and on the forearm after 4 weeks. Decreases in horny layer thickness and TEWL value were observed on the face and forearm of the experimental group. Together, the in vitro cell line and in vivo mouse studies revealed that L. plantarum K8 lysates have a moisturizing effect. A clinical research study with healthy volunteers also showed an improvement in barrier repair and function when volunteers took L. plantarum K8 lysates-containing candy. Thus, our results suggest that L. plantarum K8 lysates may help to improve skin barrier function.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.