• 제목/요약/키워드: Water gas shift

검색결과 178건 처리시간 0.026초

수소생산 공정에서의 CO2 배출처 및 유효포집기술 분석 (Analysis of CO2 Emission and Effective CO2 Capture Technology in the Hydrogen Production Process)

  • 우경택;김봉규;소영석;백문석;박승수;정혜진
    • 한국가스학회지
    • /
    • 제27권3호
    • /
    • pp.77-83
    • /
    • 2023
  • 급격한 산업화에 따른 에너지 사용량의 증가로 대기 중 이산화탄소(CO2)의 농도가 증가하여 기후변화가 가속화되고 있다. 여기에 대응하기 위해 에너지 패러다임 전환이 필요하고, 그 일환으로 수소(H2)가 주목받고 있다. 하지만 현재 대부분(95%)의 수소가 화석연료 기반의 추출수소로 생성되며, 많은 양의 CO2를 배출하고 있다. 이를 그레이수소라 하는데 여기에 CO2포집·이용·저장(CCUS)기술을 적용하여 CO2 배출량을 줄이면 블루수소가 된다. 상용 CO2 포집기술로는 습식법, 건식법, 분리막법이 있는데 각자 장단점을 가지고 있어 배가스 특성분석이 선행되어야 한다. 수소생산기지에서 배출되는 CO2는 수분제거 시 20%를 상회하고 배출량은 중소규모로 분류되어 습식법 보다 분리막법의 적용이 유리할 것으로 판단된다. 또한, LNG 냉열을 사용할 수 있다면 분리막의 포집성능(선택도)이 향상되어 효율적인 CO2 포집 공정 구현이 가능하다. 본 연구에서는 수소생산기지에서 배출되는 배가스를 분석하고 여기에 적합한 CO2 포집기술에 대한 논의가 이뤄질 것이다.

Enhanced Hydrogen Production from Methanol/Water Photo-Splitting in TiO2 Including Pd Component

  • Kwak, Byeong-Sub;Chae, Jin-Ho;Kim, Ji-Yeon;Kang, Mi-Sook
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권5호
    • /
    • pp.1047-1053
    • /
    • 2009
  • The future use of hydrogen as an energy source is expected to increase on account of its environmentally friendliness. In order to enhance the production of hydrogen, Pd ions (0.01, 0.05, 0.1, and 0.5 mol%) were incorporated $TiO_2$ (Pd-$TiO_2$) and used as a photocatalyst. The UV-visible absorbance decreased with increasing level of palladium incorporation without a wavelength shift. Although all the absorption plots showed excitation characteristics, there was an asymmetric tail observed towards a higher wavelength caused by scattering. However, the intensity of the photoluminescence (PL) curves of Pd-$TiO_2$ was smaller, with the smallest case being observed at 0.1 and 0.5 mol% Pd-$TiO_2$, which was attributedto recombination between the excited electrons and holes. Based on these optical characteristics, the evolution of $H_2$ from methanol/water (1:1) photo-splitting over Pd-$TiO_2$ in the liquid system was enhanced, compared with that over pure $TiO_2$. In particular, 2.4 mL of $H_2$ gas was produced after 8 h when 0.5 g of a 1.0 mol% Pd-$TiO_2$ catalyst was used. $H_2$ was stably evolved even after 28 h without catalytic deactivation, and the amount of $H_2$ produced reached 14.5 mL after 28 h. This is in contrast to the case of the Pd 0.1 mol% impregnated $TiO_2$ of $H_2$ evolution of 17.5 mL due to the more decreasedelectron-hole recombination.

Effect of Carbon Dioxide Concentration on Malate and Titratable Acidity in Pereskia aculeata and Kalanchoe rosea

  • Park Shin Young;Furukawa Akio
    • Environmental Sciences Bulletin of The Korean Environmental Sciences Society
    • /
    • 제2권2호
    • /
    • pp.109-114
    • /
    • 1998
  • The induction of crassulacean acid metabolism(CAM) characterized by day/night acid fluctuation was investigated in leaves from 10 days exposure to elevated $CO_2$ concentration(1,000 ${\mu}L\;L^{-1}CO_2).$ For Pereskia aculeata, have $C_3-like$ gas exchange pattern in well watered condition and shift into CAM-like in water stress, showed a more typical CAM-like diurnal acid fluctuation. Whereas the massive diurnal fluctuation of acidity in typical CAM of Kalanchoe rosea was declined. The effect of short-term exposure to various concentrations of $CO_2$ on titratable acidity in P. aculeata and K. rosea was also investigated. To investigate the response of various $CO_2$ concentrations, four different $CO_2$ levels(350, 700, 1,000 and 1,500 ${\mu}L\;L^{-1})$ were imposed for 24hr and measured the titratable acidity at 06:00, when the acidity was maximum, and 14:00, when the acidity was minimum. The accumulation of acid in P. aculeata was enhanced markedly by higher concentration of $CO_2,$ while the level of acidity in f rosea did not highly respond to $CO_2.$ A notable difference between P. aculeata and K. rosea was the response of de-acidification to a higher concentration of $CO_2$ Increasing with $CO_2,$ the degree of do-acidification of P. auleata was increased while that of K. rosea was depressed.

  • PDF

에너지자원의 이산화탄소 배출량과 비용의 상관관계 분석과 전과정평가 (Correlation Analysis on $CO_2$ Emission and Cost of Energy Resources and Life Cycle Assessment)

  • 김희태;김은철;안태규
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.153-153
    • /
    • 2010
  • The world is moving towards a post-carbon society and needs clean and renewable energy for sustainable development. There are many methodological approaches which are helping this shift based on analyzed data about energy resources and which focus on limited types of energy including liquid fossil, solid fossil, gaseous fossil, and biomass (e.g. IPCC Guidelines, ISO 14064-1, WRI Protocol, etc.). We should also consider environmental impact (e.g. greenhouse gas emissions, water use, etc.) and the economic cost of the renewable energy to make a better decision. Recently, researchers have addressed the environmental impact of new technologies which include photovoltaics, wind turbines, hydroelectric power, and biofuel. In this work, we analyze the environmental impact with a carbon emission factor to present a correlation between $CO_2$ emission and the cost of energy resources standardized by the energy output. In addition, we reviewed Life Cycle Assessment (LCA) as another methodology. Researchers who are studying energy systems have ignored the impacts of entire energy systems, e.g. the extraction and processing of fossil fuels. In power sector, the assessment should include extraction, processing, and transportation of fuels, building of power plants, production of electricity, and waste disposal. Therefore LCA could be more suitable tool for energy cost and environmental impact estimation.

  • PDF

저급 연료원의 가스화를 통한 합성가스 제조 및 액체연료 전환 기술 개발 (Technology Development of Syngas Production and Liquid Fuel Conversion of Low Grade Fuel by Gasification)

  • 정석우;이도연;황상연;박준성;변용수
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.116.1-116.1
    • /
    • 2010
  • 저급 연료원인 오일샌드는 아스팔트와 같은 중질유를 10% 이상 함유한 모래 또는 사암으로서, 겉으로는 시커먼 흙이나 모래처럼 보이나 내부에는 bitumen, 모래(점토) 및 물 등이 광물질 70~80%, bitumen 10~18%, 물 3~5% 정도의 비율로 혼합되어 있는데, 가열 또는 용매 추출 방식으로 오일샌드에 포함되어 있는 bitumen을 분리하여 정제하면 원유를 생산할 수 있으므로 고유가 시대의 대체에너지원으로 세계적인 석유회사들이 개발을 진행하고 있다. 따라서, 본 연구에서는 이러한 저급 연료원인 오일샌드 bitumen의 활용기술 개발을 위하여 기초특성 분석 결과 bitumen과 가장 유사한 특성을 가지는 것으로 파악된 중질잔사유를 대상으로 가스화를 통한 액체연료 전환을 위해 고점도 시료공급장치, 가스화기, 집진장치, 탈황장치, 수성가스 전환장치, 합성가스 압축장치, DME 전환장치 등으로 구성되는 시스템을 구축한 후 시험을 진행하였다.

  • PDF

수성가스전환반응 페로브스카이트구조 촉매 반응속도 연구 (Kinetic study of perovskite catalyst for water-gas shift reaction)

  • 전승현;배중면;임성광;김기현
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.77.2-77.2
    • /
    • 2010
  • 일산화탄소를 수소로 변환하는 수성가스전환반응(WGSR)은 수소 생산, 연료개질 시스템뿐만 아니라 암모니아 제조, 제철소 제련과정등 일선 산업현장에서 널리 활용되고 있다. 상용공정에서의 WGS반응은 두 단계의 반응기(HTS/LTS)에서 각각 Fe/Cr, Cu/Zn기반 촉매를 사용하여 이루어진다. 하지만 이러한 촉매들은 공기중 자연발화성이 있고 사용전 환원과정이 필요하다. 또한 최근에 많은 연구가 진행되고 있는 귀금속 담지 촉매는 기존 촉매의 단점을 극복하고 활성이 높은 장점이 있다. 이에 본 연구에서 제시한 페로브스카이트 촉매는 상용 촉매, 귀금속 담지촉매 시스템과의 비교를 위하여 제작된 촉매를 사용한 반응시스템과 기존 상용촉매를 사용한 반응시스템을 비교하여 개발 촉매의 성능 수준을 검토하였다. 이러한 결과 페로브스카이트 구조 촉매는 상용촉매의 공정상의 단점과 귀금속 담지촉매의 가격적인 측면에서의 단점을 동시에 극복한 촉매로서 성능 및 메탄화반응 억제 측면에서 우수성을 보유하고 있다는 것을 증명하였다. 이러한 페로브스카이트 구조 촉매의 반응특성을 규명하기 위해 문헌조사해본 결과 기존 수성가스전환반응에서 쓰이는 촉매들의 반응매카니즘은 대표적으로 formate와 redox 반응 두가지가 있었다. 페로스브스카이트 구조 촉매는 그 구조와 귀금속 함량, 활성 등 성능측면에서 귀금속 촉매와 상당히 유사한 측면이 있기 때문에 귀금속 담지 촉매의 반응속도식을 기본으로 하여 실험결과와 일치시켜 페로브스카이트구조 촉매에 맞는 반응속도식을 제시하고 이를 통한 반응파라미터 값을 도출하였다.

  • PDF

자열개질기의 운용조건에 따른 열유동 수치해석 (Thermal Flow Analysis of Operating Parameters in Autothermal Reformer)

  • 박승환;김진욱;박달영;김재동;이도형
    • 한국유체기계학회 논문집
    • /
    • 제14권6호
    • /
    • pp.61-67
    • /
    • 2011
  • The study is to analyze the chemical and heat-flow reactions in the hydrogen generation unit(autothermal reformer), using computational numerical tools. Autothermal reformer(ATR) is involved in complex chemical reaction, mass and heat transfer due to exothermic and endothermic reactions. Therefore it is necessary to reveal the effects of various operation parameters and geometries on the ATR performance by using numerical analysis. Numerical analysis needs to dominant chemical reactions that includes Full Combustion(FC) reaction, Steam Reforming(SR) reaction, Water-Gas Shift(WGS) reaction and Direct Steam Reforming(DSR) reaction. The objective of the study is to improve theoretically the reformer design capability for the goal of high hydrogen production in the autothermal reformer using methane. Hydrogen production reached maximum in a certain value of Oxygen to Carbon Ratio(OCR) or Steam to Carbon Ratio(SCR). When the longitudinal distance to dimeter ratio(L/D) is increased, hydrogen production increases.

CuO-ZnO-Al2O3 촉매에서의 메탄올 수증기 개질반응에 대한 반응속도와 유효성인자 (Kinetic and Effectiveness Factor for Methanol Steam Reforming over CuO-ZnO-Al2O3 Catalysts)

  • 임미숙;서숭혁
    • 한국수소및신에너지학회논문집
    • /
    • 제13권3호
    • /
    • pp.214-223
    • /
    • 2002
  • Kinetic and effectiveness factors for methanol steam reforming using commercial copper-containing catalysts in a plug flow reactor were investigated over the temperature ranges of $180-250^{\circ}C$ at atmospheric pressure. The selectivity of $CO_2$/$H_2$ was almost 100%, and CO products were not observed under reaction conditions employed in this work. It was indicated that $CO_2$ was directly produced and CO was formed via the reverse water gas shift reaction after methanol steam reforming. The intrinsic kinetics for such reactions were well described by the Langmuir-Hinshelwood model based on the dual-site mechanism. The six parameters in this model, including the activation energy of 103kJ/mol, were estimated from diffusion-free data. The significant effect of internal diffusion was observed for temperature higher than $230^{\circ}C$ or particle sizes larger than 0.36mm. In the diflusion-limited case, this model combined with internal effectiveness factors was also found to be good agreement with experimental data.

광합성을 이용한 바이오수소 생산 (Biohydrogen production using photosynthesis)

  • 심상준;김준표
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2006년도 춘계학술대회
    • /
    • pp.478-481
    • /
    • 2006
  • Energy is vital to global prosperity, yet dependence on fossil fuels as our primary energy source contributes to global climate change environmental degradation, and health problems. Hydrogen $(H_2)$ offers tremendous potential as a clean renewable energy currency. Hydrogen has the highest gravimetric energy density of any known fuel and is compatible with electrochemical and combustion processes for energy conversion without producing carbon-based emission that contribute to environmental pollution and climate change. Numerous methodologies have been developed for effective hydrogen production. Among them, the biological hydrogen production has gained attention, because hydrogen can be produced by cellular metabolismunder the presence of water and sunlight. The green alga Chlamydomonas reinhardtii is capable of sustained $H_2$ photoproduction when grown under sulfur deprived condition. Under sulfur deprived conditions, PSII and photosynthetic $O_2$ evolution are inactivated, resulting in shift from aerobic to anaerobic condition in the culture. After anaerobiosis, sulfur deprived algal cells induce a reversible hydrogenase and start to evolve $H_2$ gas in the light. According to above principle, we investigated the effect of induction parameters such as cell age, cell density. light intensity, and sulfate concentration under sulfur deprived condition We also developed continuous hydrogen production system by sulfate re-addition under sulfur deprived condition.

  • PDF

Steam Reforming of Toluene Over Ni/Coal Ash Catalysts: Effect of Coal Ash Composition

  • Jang, Jinyoung;Oh, Gunung;Ra, Ho Won;Yoon, Sung Min;Mun, Tae Young;Seo, Myung Won;Moon, Jihong;Lee, Jae-Goo;Yoon, Sang Jun
    • Korean Chemical Engineering Research
    • /
    • 제59권2호
    • /
    • pp.232-238
    • /
    • 2021
  • The development of a low cost catalyst with high performance and small amount of carbon deposition on catalyst from toluene steam reforming were investigated by using coal ash as a support material. Ni-loaded coal ash catalyst showed similar catalytic activity for toluene steam reforming compared with the Ni/Al2O3. At 800 ℃, the toluene conversion was 77% for Ni/TAL, 68% for Ni/KPU and 78% for Ni/Al2O3. Ni/TAL showed similar toluene conversion to Ni/Al2O3. However, Ni/KPU produced higher hydrogen yield at relatively lower toluene conversion. Ni/KPU catalyst showed a remarkable ability of suppressing the carbon deposition. The difference in coke deposition and hydrogen yield is due to the composition of KPU ash (Ca and Fe) which increase coke resistance and water gas shift reaction. This study suggests that coal ash catalysts have great potential for the application in the steam reforming of biomass tar.