• 제목/요약/키워드: Water demand by region

검색결과 64건 처리시간 0.024초

최근 12년간 아까시나무 만개일의 변화와 과정기반모형을 활용한 지역별 만개일 예측 (Recent Changes in Bloom Dates of Robinia pseudoacacia and Bloom Date Predictions Using a Process-Based Model in South Korea)

  • 김수경;김태경;윤석희;장근창;임혜민;이위영;원명수;임종환;김현석
    • 한국산림과학회지
    • /
    • 제110권3호
    • /
    • pp.322-340
    • /
    • 2021
  • 최근 급격한 봄철 기온 상승과 기후변화의 영향으로 한반도에 분포하고 있는 아까시나무의 개화 시기가 변화하면서 지역간에 동시 개화 현상(simultaneous blooming)이 관측되고 있다. 이러한 변화는 국내 양봉 산업에 큰 변화를 초래하였고, 이로 인해 정확도 높은 아까시나무 개화시기 정보에 대한 수요가 증가하고 있다. 따라서, 본 연구를 통해 아까시나무의 지역별 개화 시기 변화를 잘 설명할 수 있는 신뢰도 높은 개화 시기 예측 모형을 개발하고자 하였다. 이를 위해 지난 12년(2006~2017년)간 전국 26개 지점에서 관측된 아까시나무 만개일 자료와 과거 일기온 복원 자료를 활용하여 봄철 기온 및 아까시나무 만개일 변화의 경향성을 권역별로 파악하고, 과정기반모형을 활용하여 지역 통합 모형(SM)과 함께 지역적 특성을 반영하는 세 모형-SM에 지점별 보정계수를 도입한 수정 통합 모형(MSM), 권역별로 모수를 추정하는 권역별 통합 모형(GM), 관측 지점별로 모수를 추정하는 지역 모형(LM)-을 도출, 성능을 비교하였다. 기온 및 만개일의 경향 분석 결과, 남부 지역에 비해 봄철 기온 상승률이 2배 이상 높았던 중북부 내륙 지역의 경우 만개일이 빠른 속도로 앞당겨져, 결과적으로 남서부 해안 지역과의 만개일 차이는 1년에 0.7098일씩 감소하였다(p-value=0.0417). 전체 지역에 대한 모형의 성능 비교 결과, 지역 특이성이 반영되지 않은 SM에 비해서 MSM은 24% 이상, LM은 15% 이상 감소한 RMSE 값을 나타냈다. 또한 LM과 MSM의 예측 알고리즘을 전국 범위로 확대하여 4년 간(2014~2017년) 16개의 추가 관측 지점을 대상으로 검증한 결과, LM에 코크리깅(Co-kriging)기법을 적용한 방법이 보정계수 전국 분포도를 추정하여 SM을 보정하는 방법보다 예측력이 더 뛰어났으며, 오차의 분포는 두 모형 간에 통계적으로 유의한 차이를 보였다(RMSE: p-value=0.0118, Bias: p-value=0.0471). 본 연구는 아까시나무의 개화 시기 예측에 있어 지역 단위 예측의 신뢰도를 향상시키고 모형을 넓은 지역 범위로 확대, 적용하기 위한 방안을 제시하였다.

해상풍력발전기 설치 선박 레그의 해저면 관입 깊이에 따른 고유 진동 모드와 구조 강도 평가 (Evaluation of the Natural Vibration Modes and Structural Strength of WTIV Legs based on Seabed Penetration Depth)

  • 이명수;서광철;박주신
    • 해양환경안전학회지
    • /
    • 제30권1호
    • /
    • pp.127-134
    • /
    • 2024
  • 해상풍력발전 시장의 성장과 함께 해상풍력발전기 설치 선 시장에 대한 기대감이 커지고 있다. 해상풍력발전 시장 내 2030년까지 약 100척의 설치 선이 필요할 것으로 전망되고 있다. 척당 가격이 3,000~4,000억 원이라서 일반 운반선보다 고부가가치 시장이다. 특히, 풍력발전기 용량이 11MW 이상의 대형 설치 선의 수요가 커지고 있다. 중국을 중심으로 아시아 해상풍력발전기 시장의 급성장으로 이 지역에서 운용 가능한 설치 선에 대한 발주에 대한 협의가 많다. 아시아권역 대부분의 해저 지질은 지지 반력이 작은 점토층으로 구성되어 있다. 이러한 특성에 의해서 설치 선이 작업을 위해 수면 밖으로 오르고 내림 시 스퍼드캔(Spudcan)과 레그(Leg)의 관입 깊이가 크게 발생한다. 연구에서는 최소 3m에서 최대 21m까지 관입 변수를 이용하여 관입 깊이에 따른 고유 진동 주기, 레그의 구조 안전성 평가 그리고 전복 안전성 지수를 평가하였다. 관입 깊이가 증가하면 고유 진동 주기가 짧아지고, 레그의 모멘트 길이가 짧아져서 구조 강도의 여유 치가 증가한다. 모든 입사각에서 전복 모멘트에 대해 안전하며, 최댓값은 270도에서 발생한다. 본 연구를 통하여 검토된 조건들은 연약 지반에서 설치 선의 운용 절차서를 작성 시 관입 깊이에 따라서 레그를 어떻게 운용해야 하는지 판단할 수 있는 중요한 자료로 활용할 수 있다. 결론적으로 관입 깊이에 따른 레그 구조 안전성을 정확히 파악하는 것은 설치 선의 안전과 직결된 문제이다.

일본 어류 양식업의 발전과정과 산지교체에 관한 연구 : 참돔양식업을 사례로 (A study on Development Process of Fish Aquaculture in Japan - Case by Seabream Aquaculture -)

  • 송정헌
    • 수산경영론집
    • /
    • 제34권2호
    • /
    • pp.75-90
    • /
    • 2003
  • When we think of fundamental problems of the aquaculture industry, there are several strict conditions, and consequently the aquaculture industry is forced to change. Fish aquaculture has a structural supply surplus in production, aggravation of fishing grounds, stagnant low price due to recent recession, and drastic change of distribution circumstances. It is requested for us to initiate discussion on such issue as “how fish aquaculture establishes its status in the coastal fishery\ulcorner, will fish aquaculture grow in the future\ulcorner, and if so “how it will be restructured\ulcorner” The above issues can be observed in the mariculture of yellow tail, sea scallop and eel. But there have not been studied concerning seabream even though the production is over 30% of the total production of fish aquaculture in resent and it occupied an important status in the fish aquaculture. The objectives of this study is to forecast the future movement of sea bream aquaculture. The first goal of the study is to contribute to managerial and economic studies on the aquaculture industry. The second goal is to identify the factors influencing the competition between production areas and to identify the mechanisms involved. This study will examine the competitive power in individual producing area, its behavior, and its compulsory factors based on case study. Producing areas will be categorized according to following parameters : distance to market and availability of transportation, natural environment, the time of formation of producing areas (leaderㆍfollower), major production items, scale of business and producing areas, degree of organization in production and sales. As a factor in shaping the production area of sea bream aquaculture, natural conditions especially the water temperature is very important. Sea bream shows more active feeding and faster growth in areas located where the water temperature does not go below 13∼14$^{\circ}C$ during the winter. Also fish aquaculture is constrained by the transporting distance. Aquacultured yellowtail is a mass-produced and a mass-distributed item. It is sold a unit of cage and transported by ship. On the other hand, sea bream is sold in small amount in markets and transported by truck; so, the transportation cost is higher than yellow tail. Aquacultured sea bream has different product characteristics due to transport distance. We need to study live fish and fresh fish markets separately. Live fish was the original product form of aquacultured sea bream. Transportation of live fish has more constraints than the transportation of fresh fish. Death rate and distance are highly correlated. In addition, loading capacity of live fish is less than fresh fish. In the case of a 10 ton truck, live fish can only be loaded up to 1.5 tons. But, fresh fish which can be placed in a box can be loaded up to 5 to 6 tons. Because of this characteristics, live fish requires closer location to consumption area than fresh fish. In the consumption markets, the size of fresh fish is mainly 0.8 to 2kg.Live fish usually goes through auction, and quality is graded. Main purchaser comes from many small-sized restaurants, so a relatively small farmer and distributer can sell it. Aquacultured sea bream has been transacted as a fresh fish in GMS ,since 1993 when the price plummeted. Economies of scale works in case of fresh fish. The characteristics of fresh fish is as follows : As a large scale demander, General Merchandise Stores are the main purchasers of sea bream and the size of the fish is around 1.3kg. It mainly goes through negotiation. Aquacultured sea bream has been established as a representative food in General Merchandise Stores. GMS require stable and mass supply, consistent size, and low price. And Distribution of fresh fish is undertook by the large scale distributers, which can satisfy requirements of GMS. The market share in Tokyo Central Wholesale Market shows Mie Pref. is dominating in live fish. And Ehime Pref. is dominating in fresh fish. Ehime Pref. showed remarkable growth in 1990s. At present, the dealings of live fish is decreasing. However, the dealings of fresh fish is increasing in Tokyo Central Wholesale Market. The price of live fish is decreasing more than one of fresh fish. Even though Ehime Pref. has an ideal natural environment for sea bream aquaculture, its entry into sea bream aquaculture was late, because it was located at a further distance to consumers than the competing producing areas. However, Ehime Pref. became the number one producing areas through the sales of fresh fish in the 1990s. The production volume is almost 3 times the production volume of Mie Pref. which is the number two production area. More conversion from yellow tail aquaculture to sea bream aquaculture is taking place in Ehime Pref., because Kagosima Pref. has a better natural environment for yellow tail aquaculture. Transportation is worse than Mie Pref., but this region as a far-flung producing area makes up by increasing the business scale. Ehime Pref. increases the market share for fresh fish by creating demand from GMS. Ehime Pref. has developed market strategies such as a quick return at a small profit, a stable and mass supply and standardization in size. Ehime Pref. increases the market power by the capital of a large scale commission agent. Secondly Mie Pref. is close to markets and composed of small scale farmers. Mie Pref. switched to sea bream aquaculture early, because of the price decrease in aquacultured yellou tail and natural environmental problems. Mie Pref. had not changed until 1993 when the price of the sea bream plummeted. Because it had better natural environment and transportation. Mie Pref. has a suitable water temperature range required for sea bream aquaculture. However, the price of live sea bream continued to decline due to excessive production and economic recession. As a consequence, small scale farmers are faced with a market price below the average production cost in 1993. In such kind of situation, the small-sized and inefficient manager in Mie Pref. was obliged to withdraw from sea bream aquaculture. Kumamoto Pref. is located further from market sites and has an unsuitable nature environmental condition required for sea bream aquaculture. Although Kumamoto Pref. is trying to convert to the puffer fish aquaculture which requires different rearing techniques, aquaculture technique for puffer fish is not established yet.

  • PDF

피나클치료계획시스템에서 자동모델화과정으로 얻은 Jaw와 다엽콜리메이터의 투과 계수 평가 (Estimation of Jaw and MLC Transmission Factor Obtained by the Auto-modeling Process in the Pinnacle3 Treatment Planning System)

  • 황태진;강세권;정광호;박소아;이미연;김경주;오도훈;배훈식;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제20권4호
    • /
    • pp.269-276
    • /
    • 2009
  • 세기조절방사선치료(IMRT)뿐만 아니라 3차원 입체조형치료(3D-CRT)와 같이 광자선을 이용한 방사선 치료 기술은 방사선을 받아야 하는 표적의 면적을 충분히 증가시키면서, 동시에 정상 조직은 방사선으로부터 보호하기 위하여 정확한 선량 계산을 필요로 한다. Jaw 콜리메이터와 다엽 콜리메이터가 그러한 목적을 위해서 사용되어 왔다. 우리 기관에서 사용하는 피나클 치료계획시스템은 모델기반의 광자선량 알고리듬을 사용하기 때문에 Jaw 콜리메이터 투과계수(JTF)와 다엽 콜리메이터 투과계수(MLCTF)와 같은 모델변수들의 집합이 측정된 데이터로부터 결정된다. 그러나, 이러한 자동모델화과정에 의해서 얻어진 모델변수들이 직접 측정하여 얻은 것들과 다를 수 있는데, 이는 선량분포에 영향을 줄 수 있다. 그래서, 이 연구에서 우리는 피나클 치료계획시스템에서 자동모델화과정에 의해 얻은 JTF와 MLCTF를 평가하였다. 먼저 우리는 이 연구에서 Jaw 콜리메이터 투과계수(JTF)와 다엽 콜리메이터 투과계수(MLCTF)를 직접 측정하여 얻었는데, 이것은 물팬톰 내 기준깊이에서 조사면이 $0{\times}0\;cm^2$일 때의 선량과 $10{\times}10\;cm^2$일 때의 선량의 비로 얻었다. 또한, JTF와 MLCTF는 치료계획시스템내 자동모델화 과정에 의해서도 얻어서, 이 값들이 3차원 입체조형치료시에 선량에 어떠한 영향을 끼치는지 팬톰 연구와 환자 연구를 통해서 평가하였다. 직접 측정한 경우 JTF는 6 MV의 경우에 0.001966, 10 MV의 경우에는 0.002971이었고, MLCTF는 6 MV의 경우에 0.01657, 10 MV의 경우에 0.01925이었다. 한편, 자동모델화 과정에 의해 얻은 경우, JTF는 6 MV의 경우에 0.001983, 10 MV의 경우에는 0.010431이었고, MLCTF는 6 MV의 경우에 0.00188, 10 MV의 경우에 0.00453이었다. JTF와 MLCTF의 경우에 직접 측정한 것은 자동모델화 과정에 의해 얻은 값과 큰 차이를 보였으나, 6 MV와 10 MV의 선질을 고려하면, 보다 합리적이었고, 이러한 값의 차이는 낮은 선량의 영역에서 선량에 영향을 미쳤다. JTF와 MLCTF의 잘못된 값은 선량의 오차를 다소 발생시킬 수도 있기 때문에, JTF와 MLCTF를 자동모델화과정에 의해서 얻은 값과 직접 측정하여 얻은 값을 비교하는 것은 빔커미셔닝 단계에서 도움이 될 것이다.

  • PDF