• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2009

Radiation treatment techniques using photon beam such as three-dimensional conformal radiation therapy (3D-CRT) as well as intensity modulated radiotherapy treatment (IMRT) demand accurate dose calculation in order to increase target coverage and spare healthy tissue. Both jaw collimator and multi-leaf collimators (MLCs) for photon beams have been used to achieve such goals. In the Pinnacle3 treatment planning system (TPS), which we are using in our clinics, a set of model parameters like jaw collimator transmission factor (JTF) and MLC transmission factor (MLCTF) are determined from the measured data because it is using a model-based photon dose algorithm. However, model parameters obtained by this auto-modeling process can be different from those by direct measurement, which can have a dosimetric effect on the dose distribution. In this paper we estimated JTF and MLCTF obtained by the auto-modeling process in the Pinnacle3 TPS. At first, we obtained JTF and MLCTF by direct measurement, which were the ratio of the output at the reference depth under the closed jaw collimator (MLCs for MLCTF) to that at the same depth with the field size $10{\times}10\;cm^2$ in the water phantom. And then JTF and MLCTF were also obtained by auto-modeling process. And we evaluated the dose difference through phantom and patient study in the 3D-CRT plan. For direct measurement, JTF was 0.001966 for 6 MV and 0.002971 for 10 MV, and MLCTF was 0.01657 for 6 MV and 0.01925 for 10 MV. On the other hand, for auto-modeling process, JTF was 0.001983 for 6 MV and 0.010431 for 10 MV, and MLCTF was 0.00188 for 6 MV and 0.00453 for 10 MV. JTF and MLCTF by direct measurement were very different from those by auto-modeling process and even more reasonable considering each beam quality of 6 MV and 10 MV. These different parameters affect the dose in the low-dose region. Since the wrong estimation of JTF and MLCTF can lead some dosimetric error, comparison of direct measurement and auto-modeling of JTF and MLCTF would be helpful during the beam commissioning.

• Journal of Animal Environmental Science
• /
• v.14 no.3
• /
• pp.201-210
• /
• 2008

Farmers directly spread the livestock manure compost on their arable land as an organic fertilizer. However, there are some difficult problems to solve. first, we are unsure of whether the livestock manure compost can meet the nutritional demand of plant. Second, application of the current powered livestock manure compost to crop land is very difficult work due to heavy weight of compost and its powdered shape. For this reason, this study was carried out to develope high quality pelletized livestock manure compost. In pelletizing process with composted manure, the optimal water content for pelletizing was around 30$\sim$40%. When rice bran was mixed with 5% as a bonding agent on volume basis, the pelletizing effect was remarkably improved. On a dry matter basis, the contents of N and P of manure compost were 1.31%, and 0.58%, respectively. After pelletizing, the contents of compost pelleted were 1.37% and 0.54%, respectively. The same parameters of pelletized compost made by screw type Instrument were 1.37% and 0.53%, respectively. The other hand, N and P content of pelletized compost made by pellet mill type instrument were 1.06% and 0.18%, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.12
• /
• pp.1360-1365
• /
• 2007

The purpose of this study is to present the basic data for nonpoint pollutant loads from bridge road drainage sediments using the results to analyze organic matter and heavy metals from the four bridge drainage sampling sites with sediments of different particle size ranges. The sediment sample was collected from the bridge road drainage and the masses of nine sediments fractions were obtained after drying the separated sediment in an over at $85^{\circ}C:>2,000{\mu}m$, $1,000\sim2,000{\mu}m$, $850\sim1,000{\mu}m$, $425\sim850{\mu}m$, $212\sim425{\mu}m$, $125\sim212{\mu}m$, $90\sim125{\mu}m$, $75\sim90{\mu}m$, $<75{\mu}m$. The sediment extract was analyzed water quality constituents, including chemical oxygen demand(COD), total nitrogen(T-N), total phosphorus(T-P), heavy metals and particle size distribution. The results indicate that most of particle size ranges of the bridge road sediments was $125\sim425{\mu}m$, and portion of $<75{\mu}m$ was low. But most of the pollutants are associated with the finer fractions of the load sediments. As the results of analysis, the range and average values of COD, T-N, T-P, Fe, Cu, Cr, and Pb were $177\sim198.8$ mg/kg(77.6 mg/kg), $23\sim200$ mg/kg(83 mg/kg), T-P $18\sim215$ mg/kg(129 mg/kg), and $1,508\sim5,612$ mg/kg(3,835 mg/kg), $9.2\sim69.3$ mg/kg(49 mg/kg), $19.1\sim662.2$ mg/kg(214 mg/kg), and $28.4\sim251.4$ mg/kg(114 mg/kg), respectively. The relationship between sediment size and pollutants concentration have an inverse proportion. The removal of road sediments with frequently could be reduced the significant nonpoint pollutant load, because of the bridge road sediment contains considerable micro-particles and heavy metals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6958-6965
• /
• 2014

This study examined the occurring pattern of potential risky species and the related abiotic factors for port-specific environmental management considering the control of ballast water-induced foreign species at Incheon seaport. From a total of 62 species observed during the study, 13 red-tide and 7 toxic phytoplankton, normally occurring species in Korean waters, occurred from the seasonal investigation at the inner and outer sites of the Incheon seaport from 2007 to 2009. The number of potential risky phytoplankton was relatively high at the outer site of the port during summer and winter. Red-tide species, such as Skeletonema spp., Thalassiosira nordenskioldii, and Paralia sulcata, dominated the total standing crops at the inner site (avg. 72.4%) and outer site (avg. 77.6%) in spring and summer, being positively correlated with the concentrations of total suspended solids (TSS) and pH (p<0.05). In summer, the red-tide species (Skeletonema spp.) and toxic species (Alexandrium catenella, A. tamarense, Dinophysis acuminata and Pseudo-nitzschia spp.) co-dominated (avg. 74.2%) at the inner site, while Skeletonema spp. and P. sulcata predominated (avg. 67.2%) at the outer site. During the study periods, the toxic species were significantly and positively correlated with the chemical oxygen demand (COD), dissolved inorganic nitrogen, silicate and phosphate (p < 0.05). The chlorophyll-a (chl-a) concentration of phytoplankton at the outer site ranged from 1.49 to $5.46{\mu}g/L$ on average, which was 3-5 times higher than that at the inner site in spring, summer and autumn, whereas there was no difference in the concentration between inner (avg. $0.94{\mu}g/L$) and outer (avg. $0.95{\mu}g/L$) sites in winter. In summary, diverse red-tide species dominated and a relatively high chl-a concentration existed at the outer site, whereas a relatively high number of toxic species and low chl-a concentration was observed at the inner site in summer. The potential risky species can outbreak in association with the concentration of nutrients, COD and TSS, suggesting that distinctive management of potential risky species is needed considering the environmental characteristics of Incheon seaport.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.63-75
• /
• 2004

This research sought to determine the status of the installation and operation of domestic public resource-making facilities of resource-making facilities and come up with corresponding improvement measures. Currently compost is most numerous set-up out of facilties already established ever since, then the rest of them are feeds, anaerobic degradation, sewage combination, and combination of compost and feeds in order. As such, food waste is processed more into compost than into feeds, presumably because relevant facilities, which were originally designed for processing into feeds, were converted into composting facilities due to little demand for the processed feeds. The finding says that many related firms had yet to register their businesses in accordance with feeds and fertilizers management laws, and that food waste resources-making facilities used various basic facilities but few of them treated food waste in linkage with leaching water, bad odors, and energy. Some of current facilities were found to be 7 years old and thus outdated. Due to lack of skilled operational manpower, many facilities had less than 300 days of normal operation yearly, and some needed minor and serious repairs periodically. In overall facilities, 87% of the planned food waste was rolled in, thus requiring measures to treat the whole planned volume. For costs of resource-making facilities, some with a capacity of below 50 tons topped 100 million won, and facilities with a capacity of over 50 tons required less installation costs. Overall, installation costs ranged from 10 million to 20 million, and to 200 million won per ton, and this suggests a need to establish the installation cost calculation criteria, as well as to reshape the facility criteria. With operating costs varying greatly according to the size and treatment methods of facilities, the finding indicates a need to rationalize the operating costs, and to plan appropriate-size installation and operation of facilities to ensure economic operation.

• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.2
• /
• pp.87-94
• /
• 2012

To compare monthly variations of phytoplankton biomass and community composition between in seawater and sediment of the Gomso Bay (tidal flat: approximately 75%), the photosynthetic pigments were analyzed by HPLC every month in 1999 and every two months in 2000. Ambient physical and chemical parameters (temperature, salinity, nutrients, dissolved oxygen, and chemical oxygen demand) were also examined to find the environmental factors controlling structure of phytoplankton community. The temporal and spatial variations of chlorophyll a concentration in seawater were correlated well with the magnitude of freshwater discharge from land. The biomass of microphytobenthos at the surface sediments was lower than that in other regions of the world and 2-3 times lower than phytoplankton biomass integrated in the seawater column. Based on the results of HPLC pigment analysis, fucoxanthin, a marker pigment of diatoms, was the most prominent pigment and highly correlated with chlorophyll a in seawater and sediment of the Gomso Bay. These results suggest that diatoms are the predominant phytoplankton in seawater and sediment of the Gomso Bay. However, the monthly variation of chlorophyll a concentration in seawater at the subtidal zone was not a good correlation with that in sediment of the Gomso Bay. Although pelagic plankton was identified in seawater by microscopic examination, benthic algal species were not found in the seawater. These results suggest that contribution from the suspended microphytobenthos in the tidal flat to the subtidal zone of the Gomso Bay may be low as a food source to the primary consumer in the upper water column of the subtidal zone. Further study needs to elucidate the vertical and horizontal transport magnitude of the suspended microphytobenthos in the tidal flat to the subtidal zone.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.6
• /
• pp.570-577
• /
• 2000

Korean duok has a many kinds of shape and cooking preparation and they were improved variably Also they were famous for special festival food and theirs demand are becoming popular. Since theirs retrogradation are degraded its taste and texture during the storage which should be resolved in most food industry. There is a possibility that storage temperaure and additives may involve in retrogradation. Recently Shon et al. reported that some sugar alcohols was effective for reducing it. We can search a kinds of additives, trehalose which can protect from shocks by freezing or heating. Furthermore they emphasized the trehalose can act as substitute for bound water in dehydration situation, and trehalose more effective than oligosaccharide or sugar alcohol. Therefore we tried to exam the changes of many characteristics of glutinous and rice duck with 2 levels trehalose in the storage.

• Journal of Aquaculture
• /
• v.15 no.3
• /
• pp.145-155
• /
• 2002

Effect of density (30, 40, 65, 90 or 120/cage) of lantern and bottom cages on growth of the ark shell, Scapharca satowi was studied in the Korean west coast from April 2000 to October 2001, when the following range of environmental conditions prevailed : temperature : 4.2 -25.5 $^{\circ}C, salinity : 30.23-32.$15\textperthousand, dissolved oxygen : 5.12-7.16 $ml$/l, pH : 7.84-8.17, phosphate : 0.22-0.56 $\mu $M, dissolved inorganic nitrogen : 3.16-9.10 $\mu $M, suspended solid : 7.6-17.9 mg/l, chemical oxygen demand: 0.46-1.61 mg/l and chlorophyll-a : 0.92-5.93 $\mug/l. Daily growth rate of shell length ranged from 0.066 to 0.071 mm/day for the lantern net cages, and from 0.079 to 0.082 mm/day for the bottom cages. Total weight also ranged from 0.067 to 0.082 g/day in the lantern net cages, as against 0.099 to 0.114 g/day in the bottom cages. Hemoglobin content of S. satowi (55 mm shell length), which was about 3.9 g/dl during february, 2001, increased to 6.0 and 7.0 g/dl during October, 2001 in animals culture in the lantern and bottom cages, respectively. ANOVA test of the growth rate showed that the growth rate of S. satowi, was significantly dependent on rearing density and the tested culture methods (P < 0.0001). The daily growth rate of the shell length was more significantly correlated with water temperature; the growth rate of shell length and total weight showed a tendency decrease with decreasing temperature. In cages suspended at the bottom, not only the increase shell weight but also the meat obtainable from comparable sized S. satowi was greater. Survival decreased with increasing density and was optimal at the density of 30 individual/cage.

• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.95-101
• /
• 2002

During the periods from lily to October, 2000 in Hongseong and lucy to October, 2001 in Taean in the west coast of Korea, the following environmental conditions prevailed : water temperature : 22.0~26.817, salinity 27.23 ~30.80%, dissolved oxygen 4.12 ~6.26 ml/l, pH 7.89 ~8.09, phosphate 0.39 ~0.65 $\mu m$ , inorganic nitrogen 5.05~9.26 $\mu m$, suspended solid 5.4~20.8 mg/l and chemical oxygen demand 1.12~1.87 mg/l. The B-shaped veliger larvae of the Ark shell occurred in maximum number at $25^{\circ}C$ prevailing from mid-August at Hongseong and Taean. Full grown larvae reached maximum abundance from late August. To identify the effectiveness of the substratum for spat collection, raschel net were tested to Larval settlement. The most effective depth to collect the larvae in natural environment was the collectors suspended at 7~8 m depth. At these depths, about 49 to 94 spats were found on the collector (40$\times$50 cm), The growth of shell height (Y) to shell length (X), and total weight (W) to shell length (L) could be formulated as follows respectively: Hongseong: SH = 0.7168 SL -0.6466 ( $r^2$ = 0.9839), TW = $0.0001SL^{3.1705}$ ($r^2$ = 0.9882) Taean: SH = 0.736 SL -0.8824 ($r^2$ : 0.9899), TW : 0.00005 $SL^{3.3731}$ ($r^2$ : 0.9899)