• 멤브레인
• /
• 제4권4호
• /
• pp.213-220
• /
• 1994

정유산업 방출폐수를 재처리하여 양질의 공업용수로 활용하고자 역삼투막 및 공정으로 구성된 재활용 system을 고안하여 현장 pilot 실험을 수행하였다. 생산공정 운전상황에 따라 불규칙적으로 변하는 폐수 특성에도 불구하고 역삼투막의 경우 10~15$kg/cm^2$의 운전압력 범위내에서 96~99%정도의 비교적 높은 염배제율을 보였으며 본 실험을 통하여 얻은 재생수의 경우 냉각탑 공급용수로써의 충분한 가능성을 보여 주었다. 그러나 본 연구에서 제안 사용된 여과형 전처리 공정만으로는 충분한 처리효율을 기대하기 어려웠으며, 이는 각 여과공정법 처리수의 수질분석 결과 및 NaOH를 이용한 역삼투막 세정 결과로부터 쉽게 확인되었다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.104-104
• /
• 2018

Kori Unit 1 is the first permanent shutdown nuclear power plant in Korea and it is on June 18th, 2017. Spent fuel assemblies began to be discharged from the reactor core to the spent fuel pool(SFP) within one week after shutdown of Kori unit 1 and the campaign was completed on June 27th, 2017. The total number of spent nuclear fuel assemblies in SFP of Kori Unit-1 is 485 and their discharging date is different respectively. So, decay heat was evaluated considering the actual enrichment, operation history and cooling time of the spent fuel assemblies stored in SFP of the Kori Unit-1. The code used in the evaluation is the ORIGEN-based CAREPOOL system developed by KHNP. Decay heat calculation of PWR fuel is based on ANSI/ANS 5.1-2005, "Decay heat power in light water reactors" and ISO-10645, "Nuclear energy - Light water reactors - Calculation of the decay heat power in nuclear fuels. Also, we considered the contribution of fission products, actinide nuclides, neutron capture and radioactive material in decay heat calculation. CAREPOOL system calculates the individual and total decay heat of all of the spent fuel assemblies in SFP of Kori Unit-1. As a result, the total decay heat generated in SFP on June 28th, 2017 when the spent fuel assemblies were discharged from the reactor core, is estimated to be about 4,185.8 kw and to be about 609.5 kw on September 1st, 2018. It was also estimated that 119.6 kw is generated in 2050 when it is 32 years after the permanent shutdown. Figure 1 shows the trend of total decay heat in SFP of Kori Unit-1.

• 한국건설관리학회논문집
• /
• 제10권4호
• /
• pp.111-118
• /
• 2009

본 연구는 군 복지시설인 육군 OO회관에 신 재생에너지 중 태양열 및 지열시스템을 적용했을 때, 각각의 효율성과 경제성을 분석하여 그 성능을 평가하였다. 연구 대상 건물은 철근콘크리트구조로서 건물 규모가 지하 1층 지상 3층이며 연면적이 약 2,917$m^2$인 건물이다. 건물의 용도는 목욕탕, 식당, 객실 및 사무실이며, 연간 냉 난방 에너지 소비량 판단 및 분석을 위해 e-Quest 시뮬레이션을 이용하였다. 신 재생에너지 적용에 대한 경제성 평가는 RETScreen 시스템을 이용하였다. 단, 신 재생에너지 시스템 사용은 연구대상 건물을 표준공사비로 판단했을 때 공사비의 5% 범위내로 한정하였다. 신 재생 에너지시스템 적용시 태양열시스템은 급탕용으로, 지열시스템은 냉방용으로 하였다. 연구결과 태양열시스템이 지열시스템보다 효과적이었다. 지열시스템은 투자비 상환시점이 약 16년 6개월 이후인 반면, 태양열시스템은 약 3년 11개월 이후에 가능한 것으로 판단되었다. 향후 화석에너지의 고갈과 지구온난화 등의 문제 해결을 위한 방안으로서 신 재생에너지의 이용 확대가 예상되며, 이에 군에서도 안정적인 에너지 수급을 위해 지속적인 발전이 되길 기원한다.

• 한국환경과학회지
• /
• 제24권5호
• /
• pp.657-670
• /
• 2015

Visibility and Automatic Weather System(AWS) data near Nakdong river were analyzed to characterize fog formation during 2012-2013. The temperature was lower than its nearby city - Daegu, whereas the humidity was higher than the city. 157 fog events were observed in total during the 2 year period. About 65% of the events occurred in fall (September, October, and November) followed by winter, summer, and spring. 94 early morning fog events of longer than 30 minutes occurred when south westerly wind speed was lower than 2 m/s. During these events, the water temperature was highest followed by soil surface and air temperatures due to the advection of cold and humid air from nearby hill. The observed fog events were categorized using a fog-type classification algorithm, which used surface cooling, wind speed threshold, rate of change of air temperature and dew point temperature. As a result, frontal fog observed 6 times, radiation 4, advection 13, and evaporation 66. The evaporation fog in the study area lasted longer than other reports. It is due to the interactions of cold air drainage flow and warm surface in addition to the evaporation from the water surface. In particular, more than 60% of the evaporation fog events were accompanied with cold air flows over the wet and warm surface. Therefore, it is needed for the identification of the inland fog mechanism to evaluate the impacts of nearby topography and land cover as well as water body.

• 대한기계학회논문집
• /
• 제12권3호
• /
• pp.520-527
• /
• 1988

본 연구에서는 액체용 이젝터의 성능을 결정하는 여러가지 제약인자중 특히 레이놀즈수 변화에 따른 구동노즐의 면적비 및 목부길이가 액체용 이제터성능에 미치 는 영향을 체계적인 실험을 통하여 연구함으로써 기 개발된 CAD용 전산프로그램의 타 당성을 보다 세밀히 검토하고 이에 보완을 가하는데 연구의 목적이 있다.

• 설비공학논문집
• /
• 제29권7호
• /
• pp.360-365
• /
• 2017

Recently, development efforts of triple-effect absorption chiller have been increased in order to improve the efficiency of double-effect absorption chiller. However, triple-effect absorption chiller has some disadvantages, including high corrosion characteristic of LiBr solution at high temperature of $200^{\circ}C$. Moreover, it is necessary to develop new components for operation under high pressure of 2 bars even though COP is increased to 1.6 or 1.7. The objective of this study was to introduce a new system by combining double effect absorption chiller with single effect absorption chiller with multi-generators using bypass flow of LiBr dilute solution to $3^{rd}$ generator to overcome the disadvantages of triple-effect chiller and improve energy efficiency. Results indicate that the new absorption cycle had a much higher efficiency than double-effect chiller system, showing significant improvement when bypass solution flow rate of 25% was applied to the $3^{rd}$ generator using the main dilute solution of the absorber. The COP of the new chiller system was found to be 1.438, which was 21.7% higher than that (1.18) of the present double-effect system. The COP was decreased when solution by-pass rate to the $3^{rd}$ generator was increased. In addition, lower cooling water temperature caused higher COP. Therefore, the multi-generator system with by-pass solution might be an excellent chiller alternative to triple-effect absorption chiller with higher efficiency.

• 한국지열·수열에너지학회논문집
• /
• 제19권2호
• /
• pp.8-19
• /
• 2023

Hydronic heated road pavement (HHP) systems have well studied and documented by many researchers. However, most of the systems run on asphalt, only a few are tested with concrete, and there rarely is a comparison between those two common road materials in their heating and cooling performance. The aim of this study is to investigate the thermal performance of the HHP, such as heat dissipation performance in winter season while focusing on the surface temperature of the concrete and asphalt pavement. For preliminary study a small-scale experimental system was designed and installed to evaluate the heat transfer characteristics of the HHP in the test field. The system consists of concrete and asphalt slabs made of 1 m in width, 1 m in length, and 0.25 m in height. In two slabs, circulating water piping was embedded at a depth of 0.12 m at intervals of 0.16 m. Heating performance in winter season was tested with different inlet temperatures of 25℃, 30℃, 35℃ and 40℃ during the entire measurement period. The results indicated that concrete's heating performance is better than that of asphalt, showing higher surface temperatures for the whole experiment cases. However, the surface temperature of both concrete and asphalt pavement slabs remained above 0℃ for all experimental conditions. The heat dissipation performance of concrete and asphalt pavements was analyzed, and the heat dissipation of concrete pavement was greater than that of asphalt. In addition, the higher the set temperature of the circulating water, the higher the heat dissipation. On the other hand, the concrete pavement clearly showed a decrease in heat dissipation as the circulating water set temperature decreased, but the decrease was relatively small for the asphalt pavement. Based on this experiment, it is considered that a circulating water temperature of 20℃ or less is sufficient to prevent road ice. However, this needs to be verified by further experiments or computational fluid dynamic (CFD) analysis.

• 한국재난정보학회 논문집
• /
• 제16권4호
• /
• pp.701-711
• /
• 2020

연구목적: 본 연구에서는 두 물질의 혼합물(가연물+가연물)에서의 인화 위험성의 증가 또는 감소를 실험적으로 확인하고, 혼합물의 위험성을 제시하는 목적이 있기에 액체 혼합물의 인화 위험성을 실험적으로 확인하였다. 연구방법:인화점 실험방법 및 결과처리는 원유 및 석유 제품 인화점 시험 방법으로 사용되고 있는 테그밀폐식 시험방법인 KS M 2010-2008을 기준으로 실험하였다. 본 실험에 사용한 장비의 제조사는 일본의 TANAKA사에서 생산한 장비로 KS M 2010의 시험규격을 만족하는 시험장비로 인화점을 측정하였고, 점화원으로는 LP가스를, 냉각수로는 물을 사용하였다. 또한 인화점 측정시 냉각수의 온도는 약 2℃의 냉각수를 사용하여 실험을 진행하였다. 연구결과:실험결과로는 먼저 가연성+가연성 혼합물의 경우 두 물질의 인화점 차이가 크지 않으면 인화점의 변화가 거의 없었고, 두 물질의 인화점 차이가 낮으면 인화점이 높은 물질의 증가에 따라 인화점이 증가하는 경향을 보였으나, 톨루엔과 메탄올의 경우, 혼합물에서 인화점이 낮은 물질보다 더 낮은 인화점을 보였다. 또한 도료용 희석제의 경우, 혼합물로 이루어져서 그 물질의 인화점을 예상하기가 쉽지 않았지만 실험적으로 측정해 본 결과 -24℃~7℃사이로 측정되었다. 결론: 본 연구에서의 결과는 기존의 위험물안전관리법에서의 위험물 판정 기준에 대한 세부 내용의 실효성 확보 및 위험물 판정의 신뢰성 및 재현성 확보를 목적으로 인화성 혼합물에 대한 실험적 연구를 통해서 혼합물에 대한 위험성 판단 기준을 제시하였고, 향후 소방현장에서 단속되는 인화성 액체 대한 실험적 판정 기준에 대한 참고적인 자료를 제공할 수 있을 것이다. 또한 본 연구로 시험방법별 차이 실험에 대한 노하우를 축적한다면 위험물의 위험성 평가 연구에 있어 기초 자료이자 위험물 판정 관한 연구의 기반으로 활용될 수 있기를 기대한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.131.1-131.1
• /
• 2010

This study was conducted for engineering optimization for the gasification process which is the key factor for success of Taean IGCC gasification plant which has been driven forward under the government support in order to expand to supply new and renewable energy and diminish the burden of the responsibility for the reduction of the green house gas emission. The gasification process consists of coal milling and drying, pressurization and feeding, gasification, quenching and HP syngas cooling, slag removal system, dry flyash removal system, wet scrubbing system, and primary water treatment system. The configuration optimization is essential for the high efficiency and the cost saving. For this purpose, it was designed to have syngas cooler to recover the sensible heat as much as possible from the hot syngas produced from the gasifier which is the dry-feeding and entrained bed slagging type and also applied with the oxygen combustion and the first stage cylindrical upward gas flow. The pressure condition inside of the gasifier is around 40~45Mpg and the temperature condition is up to $1500{\sim}1700^{\circ}C$. It was designed for about 70% out of fly ash to be drained out throughout the quenching water in the bottom part of the gasifier as a type of molten slag flowing down on the membrane wall and finally become a byproduct over the slag removal system. The flyash removal system to capture solid particulates is applied with HPHT ceramic candle filter to stand up against the high pressure and temperature. When it comes to the residual tiny particles after the flyash removal system, wet scurbbing system is applied to finally clean up the solids. The washed-up syngas through the wet scrubber will keep around $130{\sim}135^{\circ}C$, 40~42Mpg and 250 ppmv of hydrochloric acid(HCl) and hydrofluoric acid(HF) at maximum and it is turned over to the gas treatment system for removing toxic gases out of the syngas to comply with the conditions requested from the gas turbine. The result of this study will be utilized to the detailed engineering, procurement and manufacturing of equipments, and construction for the Taean IGCC plant and furthermore it is the baseline technology applicable for the poly-generation such as coal gasification(SNG) and liquefaction(CTL) to reinforce national energy security and create new business models.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.11-15
• /
• 2016

무인항공기가 장시간 비행하기 위해서는 배터리보다 고분자전해질 연료전지(PEMFC)가 적합하다. 본 연구에서는 PEMFC에 수소를 공급하는 $NaBH_4$가수분해 반응 시스템에 대해 연구하였다. $NaBH_4$가수분해 반응 시스템의 무게를 감소시키기 위해 수소수율 향상, 응축수 회수, 안정적인 수율 유지 등에 대해 실험하였다. 반응기 압력제어를 함으로써 수소 수율을 3.4% 향상시켰다. 수소를 공랭하여 PEMFC 스택에 공급하는 과정에서 발생하는 응축수를 $NaBH_4$ 저장조에 회수하였다. 이 과정에서 응축수가 $NaBH_4$분말을 용해시켜 보충됨으로써 14%의 무게 감량효과가 있었다. 2.0 L/min의 속도로 수소를 발생시킬 때 Co-P-B촉매 2.0 g을 사용해서 10시간동안 96% 수소수율로 $NaBH_4$가수분해 반응 시스템을 안정적으로 구동하였다.