• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.285-293
• /
• 1971

The statistical thermodynamical properties of heavy water are calculated according to the transient state theory of significant liquid structure. The calculated values are shown to be in good agreement with the observed ones. The grand canonical ensemble partition function for the adsorbed phase of heavy water on graphite surface is derived using the theory. The adsorption isotherm, the surface pressure, the molar entropy and the molar internal energy for the adsorbed phase and then the molar heat of adsorption are calculated according to the derived partition function. The thermodynamic properties of the adsorbed water are also calculated and the results are compared with those of heavy water and discussed in view of the experimentally observed phenomena.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.2
• /
• pp.38-50
• /
• 2022

As a low-cost and high-efficiency electrocatalysts with high performance and stability become a key challenge in the development of the practical use of water electrolysis, there is an intense interest in transition-metal oxalate-based materials. Transition-metal oxalate-based catalysts with excellent electrochemical performances have been widely applied in water electrolysis due to its low-cost and ease of synthesis. This review provides a useful summary on the development of transition-metal oxalate as potential catalysts for water electrolysis with a focus on the structural and compositional alteration, role of oxalate anion, and enhanced electrochemical performances.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.148.2-148.2
• /
• 2013

We prepared hydrophobic PDMS-coated porous silica as pre-concentration adsorbent for chemical warfare agents (CWAs). Since CWAs can be harmful to human even with a small amount, detecting low-concentration CWAs has been attracting attention in defense development. Porous silica is one of the promising candidates for CWAs pre-concentration adsorbent since it is thermally stable and its surface area is sufficiently high. A drawback of silica is that adsorption of CWAs can be significantly reduced due to competitive adsorption with water molecule in air since silica is quite hydrophilic. In order to solve this problem, hydrophobic polydimethylsiloxane (PDMS) thin film was deposited on silica. Adsorption and desorption of chemical warfare agent (CWA) simulants (Dimethylmethylphosphonate, DMMP and Dipropylene Glycol Methyl Ether, DPGEM) on bare and PDMS-coated silica were studied using temperature programed desorption (TPD) with and without co-exposing of water vapor. Without exposure of water vapor, desorbed amount of DMMP from PDMS-coated silica was twice larger than that from bare silica. When the samples were exposed to DMMP and water vapor at the same time, no DMMP was desorbed from bare silica due to competitive adsorption with water. On the other hand, desorbed DMMP was detected from PDMS-coated silica with reduced amount compared to that from the sample without water vapor exposure. Adsorption and desorption of DPGME with and without water vapor exposing was also investigated. In case of bare silica, all the adsorbed DPGME was decomposed during the heating process whereas molecular DPGME was observed on PDMS-coated silica. In summary, we showed that hydrophobic PDMS-coating can enhance the adsorption selectivity toward DMMP under humid condition and PDMS-coating also can have positive effect on molecular desorption of DPGME. Therefore we propose PDMS-coated silica could be an adequate adsorbent for CWAs pre-concentration under practical condition.

• Carbon letters
• /
• v.11 no.4
• /
• pp.357-365
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.18 no.1
• /
• pp.117-119
• /
• 1997

• Journal of Photoscience
• /
• v.8 no.3_4
• /
• pp.123-126
• /
• 2001

We have attempted to determine the Germanium ion (G $e^{4+}$) effect on the human body by observing the formation of artificial lipid membrane and photolysis in the mineral water containing G $e^{4+}$ ion. The artificial lipid membrane is prepared by using the phospholipid in the Germanium water and the formation efficiency of the liposomes is compared with those obtained in the plain mineral water without G $e^{4+}$ ion. This work shows that the liposomes are formed in the Germanium water better than in the non-Germanium water. The liposomes can be photolyzed by superoxide anion ( $O_{2-}$$^{.}$) produced in the presence of some peptide such as NAT (N-acethyl-L-tryptophan). However, this is inhibited by superoxide dismutase (SOD), and it was found that the activity of SOD on the inhibition of the liposomes oxidative damage is higher in the Germanium water than in the non-Germanium water. It is concluded that the G $e^{4+}$ ion in mineral water helps the formation of new cell as well as elevation of SOD activity for the lipid oxidation.n.

• Journal of Environmental Science International
• /
• v.14 no.10
• /
• pp.919-928
• /
• 2005

This study introduces the development of new supercritical water oxidation(SCW)(multiple step oxidation) to destruct recalcitrant organic substances totally and safely by using sodium nitrate as an oxidant. This method has solved the problems of conventional SCW, such as precipitation of salt due to lowered permittivity, pressure increase following rapid rise of reaction temperature, and corrosion of reactor due to the generation of strong acid. Destruction condition and rate in the supercritical water were examined using Polyvinyl Chloride(PVC) and ion exchange resins as organic substances. The experiment was carried out at $450^{\circ}C$ for 30min, which is relatively lower than the temperature for supercritical water oxidation $(600-650^{\circ}C)$. The decomposition rates of various incombustible organic substances were very high [PVC$(87.5\%)$, Anion exchange resin$(98.6\%)$, Cationexchange resin$(98.0\%)$]. It was observed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium (salt formation). However, relatively large amount of sodium nitrate (4 equivalent) was required to raise the decomposition ratio. For complete oxidation of PCB was intended, the amount of oxidizer was an important parameter.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.237-249
• /
• 2013

Ultra-pure water (UPW), a highly treated water free of colloidal material and of a conductivity less than 0.06 ${\mu}S$, is an essential component required by modern industry. One of the methods for UPW production is the electrodialysis-ion exchange (ED/IE) system, in which the electrodialysis (ED) process is used as a preliminary demineralization step. The IE step can be replaced with electrodeionization (EDI) to decrease the volume of post-regeneration lyes. In this paper, the electrodialysis process carried out to relatively low diluate conductivity was investigated and the costs of UPW production were calculated. The optimal value of desalination degree by ED in the ED/IE and ED/EDI systems was estimated. UPW unit costs for integrated ED/IE and ED/EDI systems were compared to simple ion exchange and other methods for UPW production (RO-IE, RO-EDI). The minimal UPW unit costs in ED/EDI integrated system were estimated as $0.37/$m^3$ for feed TDS 600 mg/L and $0.36/$m^3$ for feed TDS 400 mg/L at 64 $m^3/h$ capacity, which was lower than in the comparable ED/IE integrated system ($0.42-0.44/$m^3$). The presented results suggest that an ED/EDI integrated system may be economically viable.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.4
• /
• pp.539-544
• /
• 2011

The relative focus about phosphorus (P) which causes eutrophication characterized by increased growth of undesirable algae has increased in recent years. Phosphorus forms in soil and water include both organic and inorganic forms. There are also a large number of soil P determination methods that have been designed to account for various types of P and mechanisms controlling the chemistry of P in soil, water, and residual materials for environmentally relevant forms of P. However, phosphorus forms in soil, water, and residual materials are also difficult to standardize with any reasonable consensus, due to the number of different disciplines involved. Hence, it is essential to accurately define how P can be measured in soil, water, or residual material samples to avoid potential misinterpretations or inappropriate recommendations in determining amount and types of P. Therefore, we reviewed the testing methods which have appeared in the scientific literature to provide an overview of the soil test P most commonly used.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.486-497
• /
• 2019

The non-isothermal and isothermal pyrolysis properties of H lignin and P lignin extracted from different biorefinery processes (such as supercritical water hydrolysis and fast pyrolysis) were studied using thermogravimetry analysis (TGA) and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS). The lignins were characterized by ultimate/proximate analysis, FT-IR and GPC. Based on the thermogravimetry (TG) and derivative thermogravimetry (DTG) curves, the thermal decomposition stages were obtained and the pyrolysis products were analyzed at each thermal decomposition stage of non-isothermal pyrolysis. The isothermal pyrolysis of lignins was also carried out at 400, 500, and $600^{\circ}C$ to investigate the pyrolysis product distribution at each temperature. In non-isothermal pyrolysis, P lignin recovered from a fast pyrolysis process started to decompose and produced pyrolysis products at a lower temperature than H lignin recovered from a supercritical water hydrolysis process. In isothermal pyrolysis, guaiacyl and syringyl type were the major pyrolysis products at every temperature, while the amounts of p-hydroxyphenyl type and aromatic hydrocarbons increased with the pyrolysis temperature.