• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.113-121
• /
• 2010

Recently, as container ships become larger and faster, rudder cavitations are more frequently observed near the gap between the horn and rudder plates of the ships to cause serious damages to the rudder surface of the ship. The authors already have suggested through a series of model experiments and numerical computations that employment of an appropriate blocking device for gap flow may retard the gap cavitation. For examples, a cam device installed near the outer edges of the vertical gap or a water-injection device combined with a pair of half-round bars installed inside the gap can considerably reduce the gap cavitation. However, it is also found that effective blocking of the flow through the vertical gap results in growth of the cavitation near the horizontal gap instead. In the present study, effectiveness of the simultaneous blocking of the flow through the horizontal and vertical gaps of a horn type rudder in minimizing the damage by gap cavitation is studied. Additional blocking disks are inserted inside the horizontal gaps on the top and bottom of the pintle block and numerical computations are carried out to confirm the combined effect of the blocking devices.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.41-49
• /
• 2011

The diffuser which is conventionally adapted to MBR, has problem that decreasing the cleaning effect of membrane module by inflexible air supply due to the occlusion of sludge from diffuser hole. To solve this problem, diffuser structure of submerged module should be improved to discharge sludge which is flow into the diffuser for prevent occlusion in the diffuser. In this study, the structure of the diffuser was reformed to open lower part for preclusion the blocking. And the outlet diameter of the diffuser was drawn through the condition for the depth of water and air rate, to prevent air-leak condition of improved diffuser. Moreover, application is evaluated by comparing test with occlusion effect of the conventional and improved diffuser. From the results, air-water boundary changes are steady with changes of water depth and it shows linear relation about air rate. By using this linear numerical formula, the height of diffuser's outlet can be decided. Also, it displays that it can prevent the occlusion effect during the comparing test. Hereafter, if this diffuser is applied to practical MBR process, the occlusion problem of diffuser will be disappeared.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1517-1527
• /
• 2020

This study is about the UV protection effect and water resistance of a multiple emulsion (W/O/W) sunblock cream applied with emotional engineering and reports an actual industrial case. Multiple emulsion system of sunblock cream has the characteristics of changing to a W/O type that is soft and moist when applied, and has excellent water resistance after absorption. Multiple emulsion cream is a highly functional sunblock cream that has both moisture and water resistance. It is a stable milky white cream with a viscosity of 36,000 cps. The organic sunscreen used for the sunscreen was ethylhexylmethoxycinnamate and bisethylhexyloxyphenolmethoxyphenyltriazine. Hexagonal zinc oxide and titanium dioxide that block both UVB and UVA were used. As a result of measuring the UV protection effect by the in-vitro method, the UV protection effect (SPF) is 78.9 for multiple emulsion cream, 76.7 for W/O cream, and 71.3 for O/W cream. It was found that the blocking effect was different. This obtained the highest effect value in the multiple emulsion. As a clinical (in-vivo) result of the UV protection effect, the SPF value representing the UV protection effect of the sunblock cream developed with a multiple emulsion system was 85.7, and the PA-value that blocks the UVA area was 26.5, and ++++. It was found that it has a corresponding high blocking effect. As a result of the water resistance test, the W/O/W formulation had a high waterproofing resistance of 93.8% even after 4 hours, W/O had 75.4%, and O/W had a low water resistance of 25.3%. In the results of the HUT test, it was found in the order of multiple emulsion sun block cream > hydrophilic cream > lipophilic cream. Based on the research results of this multiple emulsion, it is expected to be highly active as a sunblock cream dedicated to outdoor activities by improving the feeling of use, UV protection index, and water resistance. Therefore, in this study, a multiple emulsion system of sunblock cream is developed and has a characteristic that changes to a W/O type that has a soft and moist feeling when applied, and has excellent water resistance after absorption.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.71-76
• /
• 2010

In this study the optimum dyeing conditions and blocking effect of UV deodorization efficiency of Ligustrum japonicum Thunb were investigated. Colorants were water-extracted from Ligustrum japonicum Thunb fruit and freeze-drided to obtain colorants powder. The effects of dye concentration, dyeing temperature, dyeing time, and the number of dipping count were studied. Fastness to dry cleaning, rubbing, perspiration, and light were measured according to KS K 0644, KS K 0650, KS K 0715 and KS K 0700, respectively. In order to examine the dyeability according to dyeing conditions, reflectance of fabrics were measured by using UV/VIS spectrophotometer. The bath ratio was 1:20. Dyeing concentration was 100, 200, 300, 400 and 500% on the weight of fiber. Dyeing time was 20, 40, 60, and 80 minutes. Dyeing temperature was 20, 40, 60, 80, and $100^{\circ}C$. The infrared high pressure dying machine was used. As dyeing concentration increased, dye adsorption increased up to 400% and it slowed down. Dye uptake was increased with raising themperature up to $80^{\circ}C$ and it slowed down. Dye adsorption occurred rapidly at first 20 minutes and then it slowed down and reached almost maximum dye uptake at 60 min. Dye uptake increased by repeated dyeing. Therefore, it is considered that optimum dyeing condition is 400%(o.w.f.), $80^{\circ}C$, 60 min. And repeated dyeing improves dye uptake. Color fastness to dry cleaning and rubbing was good, but light fastness and perspiration fastness was not good. Blocking effect of ultraviolet radiation and deodorization efficiency was good.

• The Korean Journal of Pharmacology
• /
• v.2 no.1 s.2
• /
• pp.21-29
• /
• 1966

Dichloroisoproterenol(DCI) i; one of the well known ${\beta}$-adrenergic receptor blocking agents. According to Moran and Perkins, DCI has sympathomimetic like action in relatively low concentrations. Fleming and Hawkins confirmed that DCI acts upon the receptors concerned with positive chronotropic and inotropic actions in the heart. Vogins reported that DCI, in concentration of $5{\times}10^{-8}$ to $5{\times}10^{-6}g/ml$, had properties of sympathomimetic amine causing positive inotropic and chronotropic actions in normal rat atria. And James and Nadeau found that DCI had not only adrenergic blocking effect in moderate and higher concentrations, but it also blocked the effect on the sinus node by vagal stimulation and of directly administered acetylcholine in higher concentrations. As stated above by many authors, DCI has complicated actions according to its concentrations. Our aim at the present experiments was to study the effects of DCI to the action of ouabain and acetylcholine upon the excised rabbit atria, as well as to the action of barium chloride and acetylcholine upon the excised rabbit intestine. In addition, Pan ax Ginseng is widely used as tonics in oriental nations, its pharmacological action, however, has not been clearly established. So we atempted to investigate the effects of the water extract of Panax Ginseng to the action of ouabain and DCI upon both atria and intestine. The results obtained were as follows. 1) DCI has a negative inotropic effect on the excised rabbit atria at concentration of $10^{-5}$ and a positive inotropic effect at concentration of $10^{-6}$. 2) DCI (at concentration of $10^{-6}$) potentiates the positive inotropic effect of ouabain upon the excised rabbit atria. 3) DCI antagonizes the action of acetylcholine upon the excised rabbit atria. 4) The water extract of Panax Ginseng, at concentration of $10^{-3}$, decreases the contractile force of rabbit atria, and tends to slightly increase that of rabbit atria at $10^{-4}$. 5) The water extract of Panax Ginseng exhibits a synergistic action with ouabain on the contractile force of rabbit atria. 6) DCI, in concentrations of $10^{-7}{\sim}10^{-6}$, depresses the tone and amplitude of contraction of the excised rabbit intestine. The depression of the intestinal tone markedly appears in pretreatment with reserpine 2mg/kg 24 hours. 7) DCI antagonizes the contractile effect of barium chloride on the excised rabbit atria. 8) DCI has no significant influence on the action of acetylcholine upon the excised rabbit intestine. 9) The series of those evidences indicates that DCI has a sympathomimetic-like action and more over a relaxing action directly on the excised rabbit intestine. 10) The water extract of Panax Ginseng in concentrations of $10^{-4}{\sim}10^{-3}$, has transient depression of the intestinal tone, but later gradually recovers its normal motility: 11) The water extract of Panax Ginseng has a synergistic action with ouabain on the intestinal contractility.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• The Journal of Korean Medicine
• /
• v.21 no.1
• /
• pp.29-39
• /
• 2000

In order to elucidate the toxic mechanism of oxygen radicals in cultured mouse spinal sensory neurons, cytotoxic effect of oxygen radicals was evaluated by M1T assay and NR assay. In addition, protective effect of Sopunghwalhyultang(SPHHT) water extract on oxidant-induced neurotoxicity was investigated on these cultures. Spinal sensory neurons derived from mice were cultured in mediums containing various concentrations of Xanthine Oxidase / Hypoxanthine(XO/HX). Cell viability was measured by MTT assay and NR assay. XO/HX-mediated oxygen radicals remarkably decreased cell viability of cultured spinal sensory neurons in a dose-and time-dependent manner. And also, SPHHT blocked XO/HX-induced neurotoxicity in these cultures. These results suggest that oxygen radicals are toxic and SPHHT are effective in blocking against the oxidant-induced neurotoxicity in cultures of spinal sensory neurons of mice.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.3
• /
• pp.224-231
• /
• 2009

The improvement of cold start capability is one of the most challenging tasks to be solved for commercialization of fuel cell vehicle. In this study, cold start test and ice blocking test(IBT) of fuel cell stack were carried out under various operating conditions. This fuel cell stack can be thawed from -20$^{\circ}$C within 25s and the voltage change was found to be comprised of 4 steps; the first step is the voltage decrease by overpotential, the second step is the voltage increase by the cell temperature increase, the third step is the voltage decrease by ice blocking, and the last step is the voltage increase by thawing. Bootstrap startup was failed after shutdown at temperature under 40$^{\circ}$C because of much condensed water in the fuel cell. Quantitative estimation of cold start capability have been demonstrated by ice blocking test(IBT). In the results, it was found that cold start capability was improved double every 10$^{\circ}$C from 30$^{\circ}$C to 65$^{\circ}$C and enhanced by 30% at the condition of SR 3/4 compared to SR 1.5/2.0 and enhanced by 20% with dry purge condition compared to with RH 50% purge condition.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.397-402
• /
• 2006

We have investigated the effect of each ingredient in the light diffusing film (LDF) which was used as backlight unit (BLU) of TFT-LCD TV on physical, electrical, thermal and optical properties of LDF. In anti-blocking layer, the excellent anti-blocking ability was obtained when 0.5~1.5 wt% of acrylic bead was added, and good decay-time and water-stability were shown when 0.8 wt% of tertiary ammonium salt was added. Optimal results for adhesion strength, curing rates and flexibility on the surface of PET film have been obtained in the light diffusing layer by using acrylic polyol as a binder resin, and by addition of 30~35 wt% non-yellowing type HDI crosslinker. In addition, the highest normal luminance value was obtained by addition of 250 wt% poly-dispersive polystyrene ($20{\mu}m$ PS) and polymethylmethacrylate ($20{\mu}m$ PMMA) beads into the binder resin (100 wt%). The higher normal luminance could be got for PMMA beads than PS beads because of the transmittance difference.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.519-527
• /
• 2017

Membrane fouling is the main issue hindering the expansion of low pressure membrane processes for surface water treatment. Therefore, applying periodic hydraulic cleaning for fouling control should be well optimized. Better understanding of membrane fouling associated with periodic hydraulic cleaning would be useful to optimize membrane cleaning strategies. By comparing experimental permeability data with the classical Hermia blocking laws, this study aims at analyzing membrane fouling and understanding dominant fouling mechanisms occurring when filtering a synthetic surface water solution with a pressurized membrane process during six filtration cycles of 30 min each, separated with cyclic cleaning of 1 min by backwashing and forward flushing separately and combined. When applying single cleaning technique, membrane fouling during the first cycles was controlled by complete blocking mechanism while the last cycles were dominated by cake formation. Nevertheless, when combining cleaning technique better membrane regeneration was obtained and fouling was mainly due to cake formation.