• 제목/요약/키워드: Water Vapor Pressure

검색결과 422건 처리시간 0.027초

HEPA Filter형 숨쉬는 벽체용 나노세라믹 여재개발 (Development of Nano Ceramic Structures for HEPA Type Breathing Wall)

  • 김종원;안영철;김길태
    • 설비공학논문집
    • /
    • 제20권4호
    • /
    • pp.274-279
    • /
    • 2008
  • In the perspective of saving energy in buildings, high performance of insulation and air tightness for improving the heating and the cooling efficiency has brought the positive effect in an economical view. However, these building energy saving technologies cause the lack of ventilation, which is the direct cause of increasing the indoor contaminants, and it is also very harmful to residents because they spend over 90% of their time in the indoor area. Therefore, the ventilation is important to keep indoor environment clean and it can also save energy consumption. In this study, a HEPA type breathing wall is designed as a passive ventilation system to collect airborne particles and to supply fresh outdoor air. To make fine porous structures, polymer nano fibers which were made by electro spinning method are used as a precursor. The nano fibers are coated with SiO2 nano particles and finally the HEPA type breathing wall is made by sintering in the electric furnace at $300\sim500^{\circ}C$. The pressure drops of nano ceramic structure are 8.2, 25.5 and 44.9 mmAq at the face velocity of 2.0, 5.9 and 8.8 cm/s, respectively. Also the water vapor permeability is $3.6g/m^2{\cdot}h{\cdot}mmHg$. In this research, the porous nano ceramic structures are obtained and the possibility for the usage of a material for HEPA type breathing wall can be obtained.

화학열펌프에 있어서의 무기수화물계 축열시스템에 관한 연구(I) - 탈수 축열 성능연구 - (A Study on the Heat Storage System for Chemical Heat Pump Using Inorganic Hydrates(I) - Heat Storage Characteristics -)

  • 박영해;김종식
    • 태양에너지
    • /
    • 제15권3호
    • /
    • pp.29-38
    • /
    • 1995
  • 본 연구는 화학열펌프 개발을 목적으로 비교적 고온영역에서 화학축열에 응용 가능 할 것으로 판단되는 무기수화물계 $Ca(OH)_2/CaO$ 가역 반응싸이클을 이용한 수화 탈수반응에 따른 충진층내 열이동에 대하여 실험적 검토를 행하였다. 그 결과 본 실험에서 얻은 열교환특성은 $Ca(OH)_2$ 열분해 탈수반응시 반응기 내의 시료층 상단부가 하단부에 비해 탈수반응이 느리게 진행되었으며 이러한 현상은 탈수반응이 하부에서 상부로 진행됨을 알 수 있었다. 또, 반응기내 반경방향에서의 $Ca(OH)_2$ 열분해 탈수반응에 따른 온도변화는 시료 중심부에서 상 하단부로 나타났으며 이는 열전도도에 의한 온도 강하로 중심부의 축열온도가 높음을 알 수 있었다.

  • PDF

합성가스/디젤 혼소압축착화 엔진의 합성가스 혼합비와 압축비에 따른 연소 및 배출가스 특성 (Syngas/Diesel Dual Fuel Combustion in a Compression Ignition Engine with Different Composition Ratios of Syngas and Compression Ratios)

  • 이준순;정탄;이용규;김창업;오승묵
    • 한국분무공학회지
    • /
    • 제24권1호
    • /
    • pp.35-42
    • /
    • 2019
  • Syngas is widely produced by incomplete combustion of coal, water vapor, and air (oxygen) in a high-temperature/high-pressure gasifier through a coal-gasification process for power generation. In this study, a simulation syngas which was mainly composed of $H_2$, CO, $CO_2$, and $N_2$ was fueled with diesel. A modified single cylinder compression ignition (CI) engine is equipped with intake port syngas supply system and mechanical diesel direct injection system for dual fuel combustion. Combustion and emission characteristics of the engine were investigated by applying various syngas composition ratios and compression ratios. Diesel fuel injection timing was optimized to increase indicated thermal efficiency (ITE) at the engine speed 1,800 rpm and part load net indicated mean effective pressure ($IMEP_{net}$) 2 to 5 bar. ITE of the engine increased with the $H_2$ concentration, compression ratio and engine load. With 45% of $H_2$ concentration, compression ratio 17.1 and $IMEP_{net}$ 5 bar, ITE of 41.5% was achieved, which is equivalent to that of only diesel fuel operation.

에디 공분산으로 관측된 설마천 산림 유역의 증발산 (Evapotranspiration Measurements using an Eddy Covariance Technique in the Seolmacheon Catchment)

  • 권효정;김준;이정훈;정성원;이진원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2009년도 학술발표회 초록집
    • /
    • pp.1112-1116
    • /
    • 2009
  • 설마천 유역에서 에디 공분산 방법을 사용하여 2007년 9월부터 2008년 12월까지 증발산을 조사하였다. 연구 결과를 요약하면 아래와 같다. ${\bullet}$ 설마천 유역의 일 증발산은 0.1 - 5.7 mm $d-^1$의 변동폭을 가지며 연평균 1.2${\pm}$ 1.2 mm $d^{-1}$였다. ${\bullet}$ 설마천 유역의 연 증발산은 총 581 mm $yr^{-1}$로 연 강수량 (1997 mm $yr^{-1}$)의 약 1/3을 차지한다. 그러나 설마천 내에서 관측된 강수량의 공간 분포가 약 20%의 차이를 보이며, 주변 강수 자료를 사용할 경우 증발산은 연 강수량의 35%를 차지하였다. ${\bullet}$ 설마천 유역의 증발산의 경우, 지표와 대기간의 접합정도를 나타내는 오메가인자(${\Omega}$)오메가는 여름에 0.5로 평형증발산과 부과증발산이 전체 증발산에 기여하는 정도가 거의 같음을 보였다.

  • PDF

위성관측에 의한 동해상의 폭발적 저기압의 고찰 (Reviewing the Explosively Deepening Cyclone(Cyclonic Bomb) over the East Sea with the Satellite Observations)

  • 정효상
    • 대한원격탐사학회지
    • /
    • 제12권2호
    • /
    • pp.126-138
    • /
    • 1996
  • 1995년 늦가을인 11월 6일에서 8일 사이에 우리나라로부터 동해상으로 이동하면서 폭발적으로 발달한 저기압을 종관자료와 위성영상자료를 사용하여 분석하였다. 이 저기압은 중국북부에서 이동하여 한반도 국경 부근에서 경압성 구름(Baroclinic Leaf Cloud)으로 형태를 띠었고 동해상에서 컴마형(Comma) 구름으로 발달하였으며, 다시 저기압 최성기에 동반되는 Lambda형 구름으로 발달하였다. 여러 과학자들이 동해선풍에 대한 이동과 발달에 대한 수치모사에 따른 예보를 할 때 이런 저기압의 큰 경압성, 수증기의 지속적인 유입, 그리고 따뜻한 해양상으로 한파의 내습이 보편적으로 고려되는 것 들이다. 저기압의 중심기압이 24시간 내에 40hPa 이상 하강하는 이런 저기압은 겨울철에는 종종 강한 바람과 폭우나 폭설을 동반하곤 한다. 위의기간 중 12시간 연속적인 위성영상과 기상변수의 분석에 의하면 이 저기압과 관련하여 해면기압과 500hPa 기압고도의 중심은 기상위성의 합성된 강조적의영상을 사용하여 동쪽으로 이동한 전형적인 모습을 잘 묘사하고 있다. 열대성저기압의 강도와 중심기압을 가진 이런 저기압에 동반된 강풍은 60놋트로 북아메리카의 저기압폭탄이나 대서양 폭풍과 유사하게 하루에 44hpa나 중심기압이 떨어졌다.

수영만의 안개 발생에 관한 연구 (A Study on the Fog Occurrence in Suyoung Bay)

  • 조규대;김순영
    • 수산해양기술연구
    • /
    • 제26권3호
    • /
    • pp.254-264
    • /
    • 1990
  • 수영만을 포함한 부산 지방 안개발생의 특징 및 안개 발생에 대한 부산 연안의 역할을 최근 5개년(1984~1988)의 기상 관측자료 및 지상 일기도, 그리고 해양관측자료를 사용하여 조사하였다. 또한 1989년 7월 한 달 동안 수영만에서 관측한 일기상 자료와 표면 수온을 부산지방의 일기상 자료, 표면수온과 비교하였다. 부산 지방의 안개는 5, 6, 7월에 집중적으로 발생하며, 안개 발생시의 주풍향은 수증기 공급이 용이한 남서풍 및 북동풍이었다. 안개 발생과 관련된 기압계 유형은 봄철(3, 4, 5월)이 pattern 7 (이동성 고기압형), 여름철(6, 7, 8월)이 pattern3(정체전선인 33$^{\circ}$N미만에 위치한 형)과 pattern 10(정체전선이 33~36$^{\circ}$N사이에 위치한 형)이었다. 또한 이류무의 발생은 전층 (850~500mb)에 걸친 대기 불안정도의 증가 보다는 하층 대기 (850~700mb)의 한.온 이류와 해표면의 난.한 수온과의 관계에 더 많은 관련성이 있었다. 내륙 지방인 대구 지방의 안개는 강한 야간 복사 냉각에 의해서 가을철 새벽에 발생하나 해안 지방인 부산은 남풍 계열의 바람이 부는 늦봄에서 여름철(5, 6, 7월)에 다량의 수증기 유입으로 높은 상대습도를 가지게 되어 대기가 약간의 복사 냉각에 의해서도 쉽게 과포화에 이르기 때문에 5, 6, 7월에 집중적으로 발생했다. 수영만과 부산지방의 일기상 자료, 표면 수온 및 안개발생일 등은 거의 비슷하며 안개 발생 mechanism 역시 거의 일치한다고 생각된다.

  • PDF

알파비적검출방법에 의한 대기중 라돈딸핵종의 화학적 동특성연구 (A Kinetics Study of Rn Daughter and Atmospheric Trace Gas Using Alpha Track Detection)

  • 윤석철;하정우
    • Journal of Radiation Protection and Research
    • /
    • 제20권2호
    • /
    • pp.79-83
    • /
    • 1995
  • 과거 물분자와 전리방사선과의 상호작용에 의하여 생성된 방사능 극소입자에 관한 많은 연구결과가 보고되어 왔다. 특히 최근연구에서는 물분자의 방사성분해 에 의해 발생한 높은 농도의 수산화래디칼은 실내의 유기가스와 반응 후 저증기압의 화합물로 변하여 극소입자를 형성한다고 알려져왔다. 본 연구에서는 라돈의 첫째딸핵종인 Po-218에 대한 대기가스와 물분자와의 상호의존성을 조사할 목적으로, 실내가스의 최적제어가 가능한 라돈챔버를 사용하여 일련의 실험을 수행하였다. 제작된 정전기분광계를 사용하여 라돈의 첫째딸핵종인 Po-218이온에 대해 $0.07-5.0cm^2/V\;sec$ 범위의 이동도스펙트럼을 측정하였으며, 대기가스로 0.5ppm에서 5ppm까지의 $SO_2$가스를 사용하여 실험결과를 분석하였다. 라돈챔버내에 물분자의 첨가와 동 물분자의 방사성분해에 의하여 생성된 수산화래디칼에 의한 극소입자들의 형성과정을 확인하였으며 $PoO_x^+$ 이온 주변에 $SO_2$가스가 부착하면서 일어나는 화학반응에 대한 화학적 동특성연구를 수행하였다.

  • PDF

작물 캐노피 온도와 대기온도간의 상관관계 분석 및 활용 연구 (Difference in canopy and air temperature as an indicator of crop water stress and its feasibility for irrigation scheduling)

  • 김민영;최용훈;전종길;김영진
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2017년도 춘계공동학술대회
    • /
    • pp.131-131
    • /
    • 2017
  • 작물의 체온인 엽온은 작물의 증발산량 또는 작물의 스트레스와 관련이 있으며, 일반적으로 일사, 풍속, 습도 등 기상조건과 잎의 크기, 형태 등 생리작용 등에 의해 지배된다. 엽온을 작물의 수분스트레스지수, 증발산량 등을 산정하기 위한 인자로 많이 활용되고 있으며, 최근 ICT 기술의 발달로 인해 열영상 카메라, 적외선 센서 등을 활용해서 실시간 측정을 하고, 정보를 작물 생육환경 제어에 활용하는 연구들이 많이 이루어지고 있다. 본 연구에서는 시설오이를 대상으로 캐노피 온도(Canopy temperature, $T_c$)와 대기온도(Air temperature, $T_a$)간의 상관관계, 또 ($T_c-T_a$)와 포화수증기압차(Vapor pressure deficit, VPD)와의 관계를 분석하였다. 대기온도와 상대습도를 이용하여 산정된 VPD가 엽온에 미치는 영향을 분석한 결과, 엽온 증가에 따라 VPD가 증가하였으며, 캐노피와 대기온도간의 차이 또한 VPD간에 음의 상관관계($R^2=0.82{\sim}0.89$)가 나타났는데, 이는 대기온도에 따른 엽온과 포화수증기압의 상승이 원인인 것으로 나타났다. ($T_c-T_a$)와 VPD값을 이용하면 작물 수분스트레스(Crop Water Stress Index, CWSI)를 산정할 수 있는 데, 결과값을 분석한 결과 $T_c$$T_a$의 차가 적은 경우 CWSI값이 증가함을 알 수 있었다. 향후 연구에서는 추가적으로 다양한 재배환경에서의 캐노피 온도, 포화수증기압차, 그리고 CWSI를 산정하여, 적정 생육 환경조성을 위한 지표로 활용할 계획이다.

  • PDF

Solid SCR용 암모니아 저장물질인 Calcium Ammine Chloride의 합성방법 및 물질분석 연구 (A Study on Synthetic Method and Material Analysis of Calcium Ammine Chloride as Ammonia Transport Materials for Solid SCR)

  • 신종국;윤천석;김홍석
    • 한국자동차공학회논문집
    • /
    • 제23권2호
    • /
    • pp.199-207
    • /
    • 2015
  • Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

화학축냉용 무기염들의 수화반응 및 열 및 물질전달 향상방안 (Study of Hydration Reaction Characteristics of Inorganic Salts for Chemical Cold Storage and Method of Enhancement of Heat and Mass Transfer)

  • 김상욱;한종훈;황용준;이건홍
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1999년도 춘계 학술발표회 논문집
    • /
    • pp.185-191
    • /
    • 1999
  • An air-conditioning system based on the chemical heat storage principle was considered. $H_2O$ was chosen as the reaction gas and the working fluid as well. Na$_2$S, CaCl$_2$, MnCl$_2$, BaCl$_2$, MgCl$_2$, Fe$_2$(SO$_4$)$_3$ and MnSO$_4$ were tested as the solid reactants by using Cahn pressure balance. Na$_2$S was superior to other salts in respect of high capability of absorption of water gas, 5 moles of $H_2O$ per unit mole of Na$_2$S, and adequate temperature of adsorption, $65^{\circ}C$ at 7torr, and of desorption, 13$0^{\circ}C$ at 76torr. Clausius-Clapeyron diagram of Na$_2$S was obtained via adsorption experiments at several vapor pressures of water gas. To enhance heat and mass transfer characteristics, usually below 1W/m K, of the reactor bed of general adsorption systems, expanded graphite block was adapted as the support of Na$_2$S salt. Expanded graphite blocks had thermal conductivity values of 20~80W/mK with respect to 100~400kg/㎥ of block bulk density. Permeability values of expanded graphite blocks were 10$^{-13}$ ~ 10$^{-14}$ $m^2$ with respect to 100~300kg/㎥ of block bulk density showing highly decreasing values of permeability, below 10$^{-l4}$$m^2$, in the range of above 150kg/㎥ of block bulk density.y.

  • PDF