• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.53-56
• /
• 2006

KOMPSAT (KOrea Multi-Purpose SATellite)-5 for the earth observation and scientific research is scheduled to launch in 2009. The second payload, AOPOD (Atmosphere Occultation and Precision Orbit Determination) system, consists of a space-borne dual frequency GPS receiver and a laser retro reflector. GPS radio occultations from AOPOD system can be used to generate profiles of refractivity, temperature, pressure and water vapor in the neutral atmosphere with a high vertical resolution. Also the radio occultation in the ionosphere provides an inexpensive tool of vertical electron density profile. Currently, many LEO missions with GPS radio occultation receivers are on orbit and more GPS occultation missions are planed to launch in the near future. In this paper, we simulated radio occultation measurements from KOMPSAT-5 and retrieved atmospheric profiles using the simulated data.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.625-627
• /
• 2003

In this study, the Global Positioning System (GPS) data collected by the GPS receivers that were established as continuously operating reference stations by Central Weather Bureau and Industrial Technology Research Institute of Taiwan are utilized to investigate the impact of atmospheric water vapor on GPS positioning determination. The surface meteorological measurements that were concurrently acquired by instruments co-located with the GPS receivers include temperature, pressure and humidity data. To obtain the influence of the baseline length on the proposed impact study, four baselines are considered according to the locations of the permanent GPS sites. The length of the shorter baseline is about 66km, while the longer is about 118 km. The results from the studies associated with different baseline lengths and ellipsoid height were compared for the cases with and without a priori knowledge of surface meteorological measurements. The finding based on 66 days measurements is that the surface meteorological measurements have a significant impact on the positioning determination for the longer baseline case. The associated daily maximum differences are 1.1 cm and 1.4 cm for the baseline and ellipsoid height respectively. The corresponding biases are -8.1 mm in length and -7.3 mm in el lipsoid height.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2000년도 춘계 학술대회 논문집 통권 3호 Proceedings of the 2000 KSRS Spring Meeting
• /
• pp.49-54
• /
• 2000

Conventional methods for measuring winds provide wind velocity observations over limited area and time period. The use of satellite imagery for measuring wind velocity overcomes some of these limitations by providing wide area and near condinuous coverage. And its accurate depiction is essential for operational weather forecasting and for initialization of NWP models. GMS-5 provides full disk images at hourly intervals. At four times each day - 0500, 1100, 1700, 2300 hours UTC-a series of three images is received, separated by thirty minutes, centered at the four times. The current wind system generates winds from sets of 3 infrared(IR) images, separated by an hour, four times a day. It also produces visible(VIS) and water vapor(WV) image-based winds from half-hourly imagery four times a day. The derivation of wind from satellite imagery involves the identification of suitable cloud targets. tracking the targets on sequential images, associating a pressure height with the derived wind vector, and quality control. The aim of this research is to incorporate imagery from other available spectral channels and examine the error characteristics of winds derived from these images.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.99-102
• /
• 2006

Optimal flow-field design of bipolar-plates for a commercial class PEM(polymer electrolyte membrane) fuel cell stack was carried out on the basis of three-dimensional computational fluid dynamics(CFD) simulation. A three-dimensional CFD model originally developed by Shimpalee et al., has been utilized for performing large-scale simulation of a single fuel cell consisting of bipolar-plates gas diffusion layers, and a membrane-electrode-assembly(MEA). The CFD model is able to predict the current density, pressure drops, gas velocities, vapor and liquid water contents, temperature distributions, etc. inside a single fuel cell. Depending on simulation results from the CFD modeling of a PEM fuel cell, several flow-fields of bipolar-plates were designed and verified. The final design of the bipolar-plate has been chosen from the simulations and experimental tests and showed the best performance as expected from the simulation results under a normal operating condition. Thus, the CFD simulation approach to design the optimal flow-field of the bipolar-plates was successful. The final design was adopted as the best flow-field to build a commercial scale PEM fuel cell stack, the performance of which shows about 42% higher than that of the older bipolar-plate design.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.58-66
• /
• 2020

Since the typical horn-type ultrasonic equipment induces a reaction at the probe tip, the sonochemical reaction has a limitation that it occurs only in a specific area. As one of the ways to overcome this limitation, an ultrasonic device with multi-stepped horn equipped with several oscillators has been developed. The objective of this study was to investigate the sonochemical effects induced by acoustic cavitation system in 20 kHz multi-stepped ultrasonic horn using calorimetry, KI dosimetry and the luminol test. The sonochemical effects of multi-stepped ultrasonic horn were compared with that of the typical horn-type 20 kHz ultrasonic device. The effect of immersion depth and power on the sonochemical reaction was investigated in the ultrasonic system with multi-stepped ultrasonic horn. Higher calorimetric energy was obtained at higher immersion depth and power conditions. Sonochemical effects increased significantly when using the high immersion depth and input power. However, as the input power increased, the cavitation reaction zone concentrated around the ultrasonic horn. Additionally, the experiments to examine the effect of liquid temperature was conducted. The smaller sonochemical reaction was obtained for the higher liquid temperature. The effect on temperature seems to be closely related to liquid conditions such as viscosity and vapor pressure of water.

• Korean Chemical Engineering Research
• /
• 제49권3호
• /
• pp.367-371
• /
• 2011

TBAB(tetra-n-butyl ammonium bromide)는 상온/상압 조건에서 semi- clathrate를 형성하는 물질로서 최근 가스 하이드레이트 형성법을 이용한 천연가스 수송 및 저장, 기체분리 공정 등에서 열역학적 촉진제로 주목받고 있다. 본 연구에서는 TBAB의 열역학적 촉진제로서의 특성을 알아보기 위해 $CH_{4}$+TBAB와 $CO_{2}$+TBAB 혼합 하이드레이트계에 대하여 TBAB 농도(5, 32 wt%)에 따른 가스 하이드레이트 3상(하이드레이트(H)-물($L_{w}$)-기상(V)) 평형 조건을 측정하였다. 혼합 하이드레이트의 경우 TBAB의 농도가 5 wt%일 때에 비해 32 wt%일 경우에 열역학적 촉진 효과가 훨씬 크게 나타나는 것을 알 수 있었으며, 이는 순수 TBAB semi-clathrate의 농도별 상압 해리 온도 경향과 유사하였다. 또한, $^{13}C$ NMR 분석을 통하여 $CH_{4}$ + TBAB 혼합 하이드레이트의 동공에 $CH_{4}$ 기체가 포집되어 있음을 확인하였고 이 동공의 특성이 순수 $CH_{4}$ 하이드레이트(구조-I)의 작은 동공($5^{12})$과 동일함을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.51-58
• /
• 2018

In this paper, the organic material Poly(methyl methacrylate) PMMA is used with inorganic $Al_2O_3$ to fabricate organic-inorganic multilayer barrier thin films. The organic thin films are developed using a roll-to-roll electrohydrodynamic atomization system, whereas the inorganic are grown using a roll-to-roll low-temperature atmospheric pressure atomic layer deposition system. For the first time, these two technologies are used together to develop organic-inorganic multilayer barrier thin films in atmospheric condition. The films are grown under optimized parameters and classified into three classes based on the layer structures, when the total thickness of the barrier is maintained at ~ 160 nm. All classes of barriers show good morphological, optical and chemical properties. The $Al_2O_3$ films with a low average arithmetic roughness of 1.58 nm conceal the non-uniformity and irregularities in PMMA thin films with a roughness of 5.20 nm. All classes of barriers show a notably good optical transmission of ~ 85 %. The hybrid organic-inorganic barriers show water vapor and oxygen permeation in the range of ${\sim}3.2{\times}10^{-2}g/m^2/day$ and $0.015cc/m^2/day$ at $23^{\circ}C$ and 100% relative humidity. It has been confirmed that it can be mass-produced and used as a low-cost barrier thin film in various printing electronic devices.

• 한국항공우주학회지
• /
• 제31권6호
• /
• pp.88-95
• /
• 2003

임의의 성분비로 혼합되어 있는 CO$_2$와 H$_2$O 혼합가스에 대하여 회색가스가중합법(WSGGM)을 적용하였다. 모델의 타당성을 검증하기 위하여 두 가지 다른 형태의 문제를 고려하였다. 첫 번째는 문제는 일정한 분압하의 균일, 포물선 및 경계층 온도 분포를 갖는 매체에 대한 문제이고, 두 번째는 온도 및 분압이 일정치 않은 매체에 대한 문제이다. 고려된 두가지 형태의 문제들에 대하여 WSGGM을 이용한 결과는 기준이 되는 좁은밴드 모델(SNB)의 결과와 잘 일치하고 있는 것을 확인하였다. 본 연구에서 제안된 모델과 데이터베이스는 연소가스에 의한 복사열전달의 해석에 유용하게 사용될 수 있을 것이다.

• Journal of Astronomy and Space Sciences
• /
• 제25권3호
• /
• pp.267-282
• /
• 2008

대류층의 중성 대기는 전자가파의 신호 지연을 일으키기 때문에, GNSS(Global Navigation Satel-lite System)를 이용한 정밀측위의 가장 큰 오차요인으로 작용한다. 대류층 지연오차는 대류층의 굴절률과 연관 있으며, 대류층의 굴절률은 경험적으로 압력, 온도 및 수증기 분압으로 표현된다. 따라서 GNSS 안테나 위치의 기상 정보를 알고 있다면, 대류층 지연오차는 경험적 법칙에 의해 산출될 수 있다. 이 연구에서는 임의의 장소와 시간에 대한 대류층 지연오차를 생성하기 위한 기상정보 생성에 대하여 연구하였다. 한국천문연구원이 운영하는 9개의 상시 관측소에 설치된 디지털 기상 센서의 관측값을 가지고 범용 크리깅 (Ordinary Kriging)을 적용하여 기상 정보를 생성하였고, 상시 관측소의 데이터 공백을 메우기 위해 각 상시관측소의 기상 데이터를 분석하여 수치 모델을 만들어 보완하였다.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.1-9
• /
• 2010

이산화탄소($CO_2$)가 지구온난화의 주요 원인으로 밝혀지면서 $CO_2$를 분리, 회수, 저장하는 기술의 개발과 적용에 대한 관심이 높아지고 있다. 아민화합물은 대표적인 $CO_2$ 흡수제이지만 재생 시 많은 에너지가 필요하고 흡수제가 열분해되며 증발하여 소실되는 단점이 있다. 이러한 단점을 개선할 수 있는 흡수제로 이온성 액체가 개발되고 있다. 이온성 액체는 양이온, 음이온으로 구성된 염이지만 상온에서도 액체상태를 유지하는 물질로서, 높은 열적 안정성, 낮은 휘발성, 특정 기체에 대한 선택적 흡수능력 등의 특성을 보인다. 여기서는 $CO_2$ 흡수능력이 큰 것으로 보고된 이온성 액체들을 바탕으로 이온성 액체의 구조와 온도, 압력, 수분 등 $CO_2$ 흡수량에 영향을 미치는 요인들을 비교하고, $CO_2$ 분리제로서 이온성 액체의 활용 가능성을 알아보았다.