• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.841-849
• /
• 1996

Quality changes in carrot during storage were studied to investigate the efficiency, cooling properties and the washing and storage effects of hydrocooling method. As a result of plotting the nondimensionalized carrot temperature versus cooling time, its cooling rate coefficient was shown $-0.0171min^{-1}{\sim}-0.0121min^{-1}\;(R^{2}=0.99{\sim}0.95)$, and $-0.141min^{-1}{\sim}-0.0038min^{-1}\;(R^{2}=0.98{\sim}0.92)$ in package condition7. Rate of weight loss and change in moisture content of carrot were not significantly different by treatment conditions during storage at $5^{\circ}C$. During storage at $15^{\circ}C$, however, weight loss of hydrocooled carrot was lower than that of non-treated carrot from the 30th to 40th day. Especially, PE was more effective than tray for packaging hydrocooled carrots. Carrot pretreated wish sterilizing agent, packed with PE vinyl film and with residual water removed after hydrocooling showed a lower decaying-rate than any other carrots. Changes in Hunter L and b values of hydrocooled carrot were slower than those of non-treated one. The carotenoids contents of stored carrot $(0.736{\sim}0.780mg%)$ decreased to $9{\sim}43%$ after 40 days of storage at $5^{\circ}C$ and before 20 days of storage at $15^{\circ}C$. It could be presumed that the addition of sterilizing agent reduced the initial level of overall microbial and coliform counts and their growth rate during storage.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.2
• /
• pp.74-79
• /
• 2017

Purpose Proton therapy can deliver an optimal dose to tumor while reducing unnecessary dose to normal tissue as compared the conventional photon therapy. As proton beams are irradiated into tissue, various positron emitters are produced via nuclear fragmentation reactions. These positron emitters could be used for the dose verification by using PET. However, the short half-life of the radioisotopes makes it hard to obtain the enough amounts of events. The aim of this study is to investigate the effect of off-line PET imaging scan time on the PET image quality. Materials and Methods The various diameters of spheres (D=37, 28, 22 mm) filled with distilled water were inserted in a 2001 IEC body phantom. Then proton beams (100 MU) were irradiated into the center of the each sphere using the wobbling technique with the gantry angle of $0^{\circ}$. The modulation widths of the spread out bragg peak were 16.4, 14.7 and 9.3 cm for the spheres of 37, 28 and 22 mm in diameters respectively. After 5 min of the proton irradiation, the PET images of the IEC body phantom were obtained for 50 min. The PET images with different time courses (0-10 min, 11-20 min, 21-30 min, 31-40 min and 41-50 min) were obtained by dividing the frame with a duration of 10 min. In order to evaluate the off-line PET image quality with the different time courses, the contrast-to-noise ratio (CNR) of the PET image calculated for each sphere. Results The CNRs of the sphere (D=37 mm) were 0.43, 0.42, 0.40, 0.31 and 0.21 for the time courses of 0-10 min, 11-20 min, 21-30 min, 31-40 min and 41-50 min respectively. The CNRs of the sphere (D=28 mm) were 0.36, 0.32, 0.27, 0.19 and 0.09 for the time courses of 0-10 min, 11-20 min, 21-30 min, 31-40 min and 41-50 min respectively. The CNR of 37 mm sphere was decreased rapidly after 30 min of the proton irradiation. In case of the spheres of 28 mm and 22 mm, the CNR was decreased drastically after 20 min of the irradiation. Conclusion The off-line PET imaging time is an important factor for the monitoring of the proton therapy. In case of the lesion diameter of 22 mm, the off-line PET image should be obtained within 25 min after the proton irradiation. When it comes to small size of tumor, the long PET imaging time will be beneficial for the proton therapy treatment monitoring.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.124-132
• /
• 2020

The purpose of this study was to investigate the biological activities such as cytotoxicity and anti-inflammation using Manjakani (Quercus infectoria Olivier) extract. Manjakani was extracted from hot DW and 80% ethanol. Cell viability was assessed using MTT assay on RAW 264.7 cells. Also, anti-inflammatory activities were measured through changes in the levels of nitric oxide (NO), prostaglandin E₂ (PGE₂), leukotrien B4 (LTB₄), pro-inflammatory cytokines (IL-1β, IL-6 and tumor necrosis factor (TNF)-α) and transcription factor on LPS-induced RAW264.7 cells. The results confirmed that significant cytotoxicity does not appear in the concentration range of 1, 5, and 10 ㎍/㎖ of both extracts of this study. The production of NO was slowed by approximately MDE 37.2% and MEE 43.7% at 10 ㎍/㎖ concentration. Also, level of PGE₂ and LTB₄ was decreased MDE 30.9%/MEE 43.7% and MDE 37.1%/MEE 43.7%. In the case of inflammatory cytokine was reduced to MDE 38.8%/MEE 50.8% for IL-1β, MDE 35.0%/MEE 44.2% for IL-6 and MDE 31.9%/MEE 36.6% for TNF-α at 10 ㎍/㎖ concentration. The mRNA expression of NF-κB, iNOS and COX-2 significantly decreased by MDE 44.0%/MEE 16.0%, MDE 44.0%/MEE 55.0% and MDE 45.0%/MEE 40.0%, respectively, following the 10 ㎍/mL sample treatment when compared to the control. Both extracts were effective in anti-inflammatory activity. In addition, both extracts showed efficient changes of production of NO, PGE₂, LTB₄, pro-inflammatory cytokines and transcription factor. But MEE was found to have a higher inhibitory effect than MDE. In other words, Manjakani was showed significant biological activities showing anti-inflammation without cytotoxicity. These results will be provided as fundamental data for further development of the new health food and therapeutics related to the results above.

• The Journal of Korean Society for Radiation Therapy
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2003

I. Purpose The multileaf collimator(MLC) has many advantages, but use of the MLC increased effective penumbra and isodose undulation in dose distribution compared with that of an alloy block. In this work, we introduced the HD-270 MLC, which can improve the above disadvantages of MLC, and reported its feasibility study. II. Method and Materials The HD-270 MLC is a technique which combines the use of the existing Siemens multileaf collimator(3D MLC) with patient translation perpendicular to the leaf plane. The technique produces a smoothed isodose distribution with the reduced isodose undulation and effective penumbra. To assess the efficacy of the HD-270 technique and determine the appropriate resolution, a polygonal shaped MLC field was made to produce field edge angles from 0 degree to 75 degree with a step of 15 degree. Each HD-270 group was generated according to the allowed resolution, i. e., 5, 3, and 2mm. The experiment was carried out on Primus, a Siemens linear accelerator configured with HD-270 MLC. The total 60 MU of 6 MV photon beam was delivered to X-Omat film(Kodak, USA) at a SAD of 100 cm and 1.5 cm depth in solid water phantom. Exposed films were scanned by Lumiscan75(LUMISYS) and analyzed using RIT113 software(Radiological Imaging Technology Inc., USA). To test the mechanical accuracy of table movement, the transverse, longitudinal, and vertical positions were controlled by a consol with ${\pm}5\;mm,\;{\pm}4\;mm,\;{\pm}3\;mm,\;and\;{\pm}2\;mm$ steps, and then measured using a dial gauge with an accuracy of 0.001 inch. During the experiments, the table loaded with about 50Kg human phantom to simulate the real treatment situation. III. Results The effective penumbra and isodose undulation became larger with increase the resolution and field edge angle. The accuracy of the table movement on each direction is good within the ${\pm}1\;mm$. IV. Conclusion Clinical use of the MLC can be increased by using of the HD-270 MLC which complements to the disadvantages of the MLC.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.2
• /
• pp.20-26
• /
• 1984

This study was carried out to investigate the influence of chemical type and its retention in the fire-retardant treated plywoods on the static bending strength, a property peculiar to plywood. Being soaked in 20% aqueous solution of $(NH_4)_2SO_4$, $NH_4H_2PO_4$, $(NH_4)_2HPO_4$. Borax-Boric acid and Minalith for 3 to 12 hours at three-hour intervals and redried at $120^{\circ}C$ in hot press, the treated plywoods were put to static bending test. The values of chemical treated plywoods in Stress at proportional limit, Modulus of elasticity, Modulus of rupture and Work per unit volume to proportional limit were widely higher than those of water treated plywoods(control) and Borax-Boric acid treatment showed the highest value in the four mechanical data. And the bending strength of fire-retardant treated plywoods increased with the extension of soaking time or the increase of chemical retention in themselves. Borix-Boric acid was the desirable fire-retardant for thin plywood in view of mechanical strength and soaking defects in this study.

• Korean Journal of Food Science and Technology
• /
• v.17 no.2
• /
• pp.121-127
• /
• 1985

In studying the structural work on ciguatoxin, parrot fish collected were identified as Scarus sordidus, S. frenatus, S. scaber and S. pectarlis, in which only S. sordidus contained toxic materials. Crude toxins obtained by silicic acid column chromatography, could be separated on a DEAE-cellulose column into two fractions, ST-1(less polar) and ST-2(polar) eluted with chloroform and chloroform-methanol(1:1). Furthermore ST-1 could be changed into ST-2 by repeated chromatography on DEAE-cellulose. Rf values of ST-1 and ST-2 were 0.60-0.75 and 0.30-0.54 on TLC coated with silica gel 60F-254 developed by chloroform-methanol-water-acetic acid (90:9.5:0.2:0.3) mixture. The peaks of ST-1 and ST-2 were not observed on each HPLC chromatogram at low sensitivity(2X), but by bioassay they were detected in the fraction of 24-27ml(less polar toxin, 120ng) and 22-27 ml (polar toxin, 150 ng). Less polar ciguatoxin from morey eel viscera also showed its peak in the same elution volume(25ml). Being subjected to chromatography on basic aluminum oxide (activity grade I) or to alkaline treatment, followed by basic aluminum oxide (activity grade I) chromatography ST-1 toxin was remarkably converted into the polar toxic component supposed to be polar ciguatoxin in both cases. In the latter case, approximately 74% of the residual toxicity was changed into the polar component, accompanied by about 50% loss of the initial toxicity. More than 26% of ST-2 toxicity was transformed into the less polar toxic component supposed to be less polar ciguatoxin on a deactivated aluminum oxide (activity grade V) column.

• Journal of the Korean Wood Science and Technology
• /
• v.12 no.4
• /
• pp.19-30
• /
• 1984

This experiment was carried out to investigate the effects of autohydrolysis and extraction conditions on the separation of the chemical substances, the extractability of lignin by dioxane, and the yield of reducing sugars from cellulosic substrates by using a commercial cellulase derived from Trichoderma viride. Air-dried wood meals through 0.42mm (40 mesh) screen and retained on 0.25 mm (60 mesh) of Populus alba-glandulosa and Pinus koraiensis were autohydrolyzed with water at $180^{\circ}C$ for 30 and/or 60 minutes in a 6 liter stainless-steel digester with or without 2% 2-naphthol. The hydrothermally-treated wood meals were extracted the lignin with 100%, 90%, 75% and 50% dioxane solutions at $70^{\circ}C$ for 4 hours, respectively. The results obtained were as follows; 1) After autohydrolysis of Populus alba-glandulosa, the yield of wood meals decreased with lengthening the auto hydrolysis time from 30 minutes to 60 minutes and with 2% 2-naphthol addition. In case of Pinus koraiensis, the yield was not affected by 2%, 2-naphthol addition at the autohydrolysis in the digester. 2) After autohydrolysis and lignin extraction of Populus alba-glandulosa, the yield of wood meals decreased with lengthening the autohydrolysis time from 30 minutes to 60 minutes and with 2% 2-naphthol addition. Extraction of 50% dioxane solution was the best solvent for the yield among the solutions of 100%, 90%. 75% and 50% dioxane. In case of Pinus koraiensis, the yield was not affected by 2% 2-naphthol addition and the solution of 90% dioxane was the poorest solvent for the yield. 3) After autohydrolysis and lignin extraction of Populus alba-glandulosa, the Klason lignin content in cellulosic substrates for enzymatic hydrolysis decreased with lengthening the autohydrolysis time from 30 minutes to 60 minutes and with 2% 2-naphthol addition. Klason lignin content was the lowest after extraction by 90% or 75% dioxane solution. The content was also affected by interaction of the three factors-autohydrolysis time, 2% 2-naphthol addition and concentration of dioxane. In case of Pinus koraiensis, the Klason lignin content increased with 2% 2-naphthol addition but was not affected by the concentration of dioxane solution. 4) After autohydrolysis and lignin extraction of Populus alba-glandulosa, the extractable Klason lignin content by extraction increased with lengthening the auto hydrolysis time from 30 minutes to 60 minutes and with 2% 2-naphthol addition. The extractable lignin content was the highest after extraction by 90% or 75% dioxane solution. In case of Pinus koraiensis, the extractable lignin content increased with 2% 2-naphthol addition. Extractions by 100%, 90% and 50% dioxane solutions were more effective for the extraction of Klason lignin than by 75% dioxane solution. 5) After autohydrolysis and lignin extraction of Populus alba-glandulosa, the yield of reducing sugars increased with lengthening the autohydrolysis time from 30 minutes to 60 minutes but was not affected by 2% 2-naphthol addition and the concentration of dioxane. The yield of reducing sugars after enzymatic hydrolysis was slightly higher by extractions with 90%, 75% and 50% dioxane solutions than with 100% dioxane. In case of Pinus koraiensis, the yield of reducing sugars was not affected by 2% 2-naphthol addition but affected by the concentration of dioxane. The yield of reducing sugars was the highest in cellulosic substrates extracted by 100% dioxane solution.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.219-226
• /
• 2006

The wastes (the needle leaves and branches) produced from thinning the forest were fermented under an anaerobic condition (pine silage) to utilize as a forage source of ruminants. An in situ trial was conducted with two ruminally fistulated Korean native cows by 4 replicates (2 bags per cow), and in vivo digestibility of pine silage was estimated with five Korean native steers by 5 replicates in incomplete double turn-over design. In order to investigate feed efficiency and carcass traits, forty eight Korean native bulls were assigned to four treatments (0%, 25%, 50%, 75% of pine silage) with a completely randomized design in 12 pens accommodating 4 animals per pen. The amounts of concentrate and roughage allowed to experimental animals were in the range of 2.5% and 0.6% of body weight, respectively. Animals had freely accessed to mineral block and water in stanchion barn.An in situ crude protein digestibility of the roughage sources when suspended for 48 hrs in the rumen was higher for feeding the pine silage than the rice straw, whereas NDF digestibility was vice versa. No differences between the treatments were observed in in vivo digestibilities of dry matter, crude protein and NDF. Daily body weight gain was significantly (P<0.01) higher for the pine silage substitutions compared with the rice straw feeding except for the 25% silage feeding. The pine silage feeding did not affect feed efficiency.In carcass traits, marbling score tended to be higher for the 50% pine silage treatment than the other treatments while back fat thickness tended to be the thinnest for the rice straw feeding. From these results, it may be recommended to substitute pine silage, as a forage source, for rice straw by 50 percent.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.537-545
• /
• 1995

Quality changes of lettuce were studied during storage to investigate the efficiency, cooling properties and the washing and storage effects of immersion-type hydrocooling. As a result of plotting the nondimensionalized lettuce temperature versus cooling time, its cooling rate coefficient was shown to be $-0.365\;min^{-1}{\sim}-0.255\;min^{-1}\;(R^2=0.99{\sim}0.88)$. Rate of weight loss was not significantly (p>0.05) different between lettuces with various treatment conditions during storage at $5^{\circ}C$. However, during storage at $15^{\circ}C$, weight loss of hydrocooled lettuce was lower than that of non-treated lettuce after from 10 to 15 days. Especially, The lettuce packed with PE was more effective than that packed with try in terms of packing condition after hydrocooling. Lettuce pretreated with sterilizing agent, packed with PE vinyl film, removed residual water after hydrocooling had lower decaying rate than any other lettuces. Changes of L and b values in hydrocooled lettuce were slower than those of non-treated one. During changes of chlorophyll content, the initial value, $115.7{\sim}147.3\;mg%$ was decreased to $50{\sim}60%$ after 25 days of storage at $5^{\circ}C$ and within 15 days of storage at $15^{\circ}C$. It could be presumed that the addition of sterilizing agent reduced the initial level of overall total and coliform count and its growth rate during storage. The respiration rate of hydrocooled lettuce at $5^{\circ}C$ was $23.95\;mg{\cdot}CO_2/kg\;hr$, which is 10% of those of non-treated lettuce.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.442-458
• /
• 2011

Among Cucubitaceae, melon (Cucumis melo) is one of the most diversified fruits, with various forms, sizes, pulps, and peel colors, In addition, it is a commercially important crop because of its high sweetness, deep flavor, and abundant juice. In the species, there are both climacteric and non-climacteric melons depending on the respiration and ethylene production patterns after harvest. Ethylene is also considered a crucial hormone for determining sex expression, Phytohormones other than ethylene interact and regulate ripening, There are some indices that can be used to evaluate the optimum harvest maturity. The harvest time can be estimated after the pollination time, which is the most commonly used method of determining the harvest maturity of the fruit. Besides the physiological aspects, the biochemical alterations, including those of sweetness, firmness, flavor, color, and rind, contribute to the overall fruit quality. These changes can be categorized based on the ethylene-dependent and ethylene-independent phenomena due to the ethylene-suppressed transgenic melon. After harvest, the fruits are precooled to $10^{\circ}C$ to reduce the field heat, after which they are sized and packed. The fruits can be treated with hot water ($60^{\circ}C$ for 60 min) to prevent the softening of the enzyme activity and microorganisms, and with calcium to maintain their firmness. 1-methylenecyclopropene (1-MCP) treatment also maintains their storability by inhibiting respiration and ethylene production. The shelf life of melon is very short even under cold storage, like other cucurbits, and it is prone to obtaining chilling injury under $10^{\circ}C$. In South Korea, low-temperature ($10^{\circ}C$) storage is known to be the best storage condition for the fruit. For long-time transport, CA storage is a good method of maintaining the quality of the fruit by reducing the respiration and ethylene. For fresh-cut processing, washing with a sanitizing agent and packing with plastic-film processing are needed, and low-temperature storage is necessary. The consumer need and demand for fresh-cut melon are growing, but preserving the quality of fresh-cut melon is more challenging than preserving the quality of the whole fruit.