• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1136-1141
• /
• 2003

The primary insulation materials used in an oil filled transformer are kraft paper, wood, porcelain and oil. Modern transformers use chemically treated paper to improve its tensile strength and resistance to aging caused by immersion in oil. But these insulation papers are mainly aged by thermal stress. Over the life time of the insulation paper and oil, it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper used in the layer insulation. We made two aging cells in which insulation papers and mineral oil are conducted to test thermal properties. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.246-247
• /
• 2005

The paper presents the heat transfer characteristics during cooling process of carbon dioxide($CO_2$) in a helically coiled tube. The main components of the apparatus consist of a receiver, a variable speed pump, a mass flowmeter, a pre-heater, a gas cooler(test section) and an isothermal tank. The test section with the inner diameter 4.55 [mm] is a tube in tube type heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus. The main results were summarized as follows : The heat transfer coefficient increases with respect to the decrease of the gas cooler pressure in a supercritical region and the increase of the refrigerant mass flux. The pressure drop decreases in increases of the gas cooler pressure and increases with respect to increases the refrigerant mass flux.

• 한국해양공학회지
• /
• 제32권4호
• /
• pp.261-271
• /
• 2018

In this study, a hydraulic model test, to which Particle Image Velocimetry (PIV) system applied, was used to determine the hydrodynamic characteristics of the advection-diffusion of saltwater according to bottom conditions (impermeable/permeability, diameter, and inclination) and the difference of the initial salt. Considering quantitative and qualitative results from the experiment, the characteristics of the density current were discussed. As an experimental result, the advection-diffusion mechanism of salinity was examined by the shape of saltwater wedge and the flow structure of density currents with various bottom conditions. The vertical salt concentration obtained from the experiment was used as quantitative data to calculate the diffusion coefficient that was used in the numerical model of the advection-diffusion of saltwater.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.1-13
• /
• 2014

A new 5-MW floating offshore wind turbine moored by a spring-tensioned-leg was proposed for installation in about 50m water depth. Its substructure is a platform of the inverted conical cylinder type with massive ballast weight plate at the bottom. A 1:128 scale model was built for the preliminary engineering development. The model tests in waves and wind were carried out to estimate motion characteristics of this platform in the Ocean Engineering Wide Tank of the University of Ulsan. Its motions were measured and the RAOs were compared. The proposed floating offshore wind turbine showed a good stability and decent responses in waves, wind and operation of the wind turbine.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.390-403
• /
• 2017

Smoothed Particle Hydrodynamics (SPH) method has a good adaptability for the simulation of free surface flow problems. There are two forms of SPH. One is weak compressible SPH and the other one is incompressible SPH (ISPH). Compared with the former one, ISPH method performs better in many cases. ISPH based on Rankine source solution can perform better than traditional ISPH, as it can use larger stepping length by avoiding the second order derivative in pressure Poisson equation. However, ISPH_R method needs to solve the sparse linear matrix for pressure Poisson equation, which is one of the most expensive parts during one time stepping calculation. Iterative methods are normally used for solving Poisson equation with large particle numbers. However, there are many iterative methods available and the question for using which one is still open. In this paper, three iterative methods, CGS, Bi-CGstab and GMRES are compared, which are suitable and typical for large unsymmetrical sparse matrix solutions. According to the numerical tests on different cases, still water test, dam breaking, violent tank sloshing, solitary wave slamming, the GMRES method is more efficient than CGS and Bi-CGstab for ISPH method.

• Fisheries and Aquatic Sciences
• /
• 제16권2호
• /
• pp.101-108
• /
• 2013

An active stimulating device (ASD) consisting of a net panel or ropes fluttering in the turbulence inside the cod end was effective in driving fish near the cod end to reduce juvenile by-catch. The fluttering characteristics of the rope and net panel were examined by video observations and analyzed for fluttering amplitude and period in a water channel and in field experiments with a bottom trawl. The amplitude ratio of the fluttering ropes or nets in the tank test increased with the fluttering index as the diameter of the twine, mesh size, flexibility, and flow velocity changed, whereas the period decreased with the above factors. In bottom trawl experiments, the range of mean depth difference in the fluttering net panel was 12-17% of the length of the fluttering net, and the period of depth difference or three-dimensional (3D) tilt was revealed, with shorter ones ranging from 2 to 6 s. The amplitude as depth difference and period from field measurements were similar to those of nets in tank experiments and also to the period of 3D flow velocity inside the cod end. These results could be used to design an ASD that could be used for to the cod end of actual towed fishing gear to reduce juvenile by-catch.

• 설비공학논문집
• /
• 제29권12호
• /
• pp.638-644
• /
• 2017

Optimal cooling operation algorithm was developed based on a simulation case of a single family house model equipped with renewable energy facility. EnergyPlus simulation results were used as virtual test data. The model contained three energy storage elements: thermal heat capacity of the living room, chilled water storage tank, and battery. Their charging and discharging schedules were optimized so that daily electricity bill became minimal. As an optimization tool, linear programming was considered because it was possible to obtain results in real time. For its adoption, EnergyPlus-based house model had to be linearly approximated. Results of this study revealed that dynamic cooling load of the living room could be approximated by a linear RC model. Scheduling based on the linear programming was then compared to that by a nonlinear optimization algorithm which was made using GenOpt developed by a national lab in USA. They showed quite similar performances. Therefore, linear programming can be a practical solution to optimal operation scheduling if linear dynamic models are tuned to simulate their real equivalents with reasonable accuracy.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.61-69
• /
• 2001

The heat transfer characteristics of horizontal and vertical mantle heat storage tanks are studied in order to replace the tank-coil heat exchanger for application in thermosyphon solar water heaters. In this study, 5 mantle storage tanks with different geometric shape are manufactured into stainless steel and each tank is tested. For the test, The inlet flow rate of the heat transfer fluid is maintained 1.2 lpm consistently. The heat transfer fluid temperature through the mantle is $70{\pm}1^{\circ}C$. The temperatures of 26 points included the ambient temperature are measured at every one minute. The measured data are used to calculate the overall heat transfer coefficient(UA) using the LMTD(Log Mean Temperature Difference) method and it is used on the analysis of the heat transfer characteristics to search for optimum arrangement.

• 한국패류학회지
• /
• 제30권1호
• /
• pp.9-15
• /
• 2014

완도에서 주로 사용되는 4열 10행의 가두리 1조를 조합한 형태로 구성된 PE프레임의 내파성 전복가두리를 1/20로 축소하여 모형을 만들고 유체흐름 가시화 실험을 통해 전복가두리 주위의 해수의 흐름을 파악했다. 실험의 결과를 검증하기 위해 노화도 현장의 전복양식 가두리의 내부와 외부의 유속을 측정하였다. 연구의 결과는 아래와 같다. 1. 모형실험에서 전복가두리에 입사하는 해수는 대부분 첫 번째 단위 가두리 (칸) 를 통과하지 못하였다. 2. 모형 전복가두리 중앙 부위에서는 가두리에서 수조바닥으로 향하는 흐름을 관측하였다. 3. 모형 전복가두리의 외측 열을 빠져나가는 유체의 유속이 내측 열을 빠져나가는 유체의 유속보다 빨랐다. 4. 노화도의 현장 양식가두리의 2 m앞의 조류의 유속은 0.11 m/sec였지만 가두리 칸 내부의 유속은 0.0009 m/sec로 거의 움직임이 없었다. 5. 현재의 전복가두리 형태는 해수의 유통이 원활하지 않아 가두리 내부로 새로운 해수를 공급하기 어려울 것으로 판단된다.

• 융합신호처리학회논문지
• /
• 제16권2호
• /
• pp.74-82
• /
• 2015

본 논문에서는 BM 활성수를 생산하는 BM 활성수 플랜트 공정 제어시스템 모델을 제안하고, 다음과 같은 기능을 가진 BM 활성수 플랜트 공정 제어기를 개발 하였다. 첫 번째 기능으로는 먼저 부로와가 과부하가 걸렸을 때, 과전류 감지기가 동작하여 일정시간 부로와를 정지시킨 후 재 기동 하도록 하였다. 두 번째는 정전시 유도조에서 퇴비투입조로의 순환을 막기 위해 전동밸브가 정전시 자동으로 닫히는 기능을 부가함으로서 볼밸브의 고장으로 인한 퇴비투입조의 누수를 막을 수 있다. 세 번째는 생산된 활성수를 농축조에서 4개의 저장조로 자동으로 이송할 수 있는 기능을 부가하여 활성수 생산량을 자동 관리 하였다. 그리고 BM 활성수 플랜트 공정제어기 신호측정 시험장치를 개발하여 제작한 BM 활성수 플랜트 공정 제어기가 설계한 사양대로 잘 동작하는지 확인 하였다. 본 연구는 BM 활성수 플랜트 공정제어기를 견실한 저가의 시퀀서 제어방식 기반의 공정 제어기를 개발하여 시스템의 안정성과 효율성의 향상 및 운전관리 비용의 절감을 꾀할 수 있으리라 기대된다.