• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.849-851
• /
• 2010

본 논문에서는 화초를 전문으로 관리하는 대규모 화훼단지 또는 사무실이나 가정 등에서 취미생활로 소량의 화초를 관리하고 있는 경우에, 화초에 물을 제때 공급해주지 않아서 화초가 말라죽는 것을 사전에 방지하기위한 물 공급 도우미를 제안 한다. 제안하는 시스템은 초기 연구단계로서 2개 이하의 화초에 대해서 적용한다. 습도센서를 사용해서 흙속에 존재하는 수분의 양을 측정하고, 수분의 양이 특정한 값 이하로 떨어지면 물 공급 시스템의 밸브를 자동으로 열어서 일정한 물이 공급되게 한다.

• 한국수자원학회논문집
• /
• 제52권10호
• /
• pp.719-728
• /
• 2019

상수도 관망 밸브는 평상시 관로의 유향을 변경하는 역할을 하지만, 관로 파손, 수질 문제 등 사고 발생 시 해당 구역을 격리하는데에도 이용된다. 밸브조작에 의한 구역 단수는 주변 지역의 압력 및 물 공급 성능 저하를 유발한다. 최근 안정적인 상수도 관망 물 공급을 위협하는 사고가 다양하고 빈번하게 발생하고 있으며, 이에 따라 다양한 시나리오를 고려하여 밸브 위치 결정을 하는 것이 필요하다고 할 수 있다. 따라서 본 연구에서는 밸브의 개수, 구역격리 시 물 부족량, 수리학적 거리 인자(Hydraulic Geodesic Index, HGI)를 통합한 목적함수를 개발하고, 다양한 물 부족 시나리오에 기반한 밸브 최적 위치 결정 방법론을 제안한다. 제안한 방법론은 페스카라 관망에 적용되었으며, 시나리오별로 도출된 최적 밸브 설계안의 차이점을 분석하였다. 최적 밸브 위치 탐색 과정 중 수행된 관망 수리해석은 압력 기반(Pressure Driven Analysis, PDA)으로 수행하였다. 개발된 방법론으로 도출한 최적 밸브 설계안은 기존 설계안 대비 밸브 개수가 최대 19개나 적었고, 세그먼트 격리 시 물 공급 부족량 또한 상대적으로 작았다. 수원 수두가 낮은 시나리오를 고려할수록 더 많은 밸브가 설치되었는데, 밸브 추가 설치에 따른 비용증가는 다양한 시나리오에서 물 공급 성능 향상으로 이어짐을 확인하였다. 또한, 세그먼트 격리 상황 모의를 압력 및 유량 기반 해석으로 수행한 결과를 비교하여, 밸브 최적 위치 설계 수행 시 압력 기반 해석이 필요함을 확인하였다.

• 한국재난정보학회 논문집
• /
• 제16권1호
• /
• pp.144-154
• /
• 2020

연구목적: 본 논문은 밸브의 누수 상태를 확인하기 위한 모니터링 시스템을 위하여 개발된 스마트 볼트의 적용성에 대한 기초 연구이다. 연구방법: 스마트 볼트에 내장된 변형률 센서와 가속도 센서를 이용하여 모의 누수 탐지 실험을 실시하였다. 연구결과: 스마트 볼트는 볼트 조임토크 기준에 부합하였으며 허용인장응력 범위 내에서 거동을 하여 상수도 체결부 적용에 부합되는 것으로 나타났다. 그리고 모의 누수 실험결과 밸브 누수 지점에선 60Hz 대역의 누수 신호가 탐지 되었으며, 메인관 누수에서는 상대적으로 고주파수 대역의 누수 신호도 탐지되었다. 결론: 모의 배관이 구속되지 않은 상태에서 전체적으로 연성진동이 이뤄진 것으로 보인다. 스마트 볼트를 통해 밸브 누수 신호의 감지에 대한 가능성을 확인하였다.

• 설비공학논문집
• /
• 제26권5호
• /
• pp.218-223
• /
• 2014

Korea District heating corp. recently give an attention to combine the district heating and supply pipes as a two pipe system that are in the present system separated with room heating and warm water supply pipe, and the two pipe system is commonly applied for heating service in European countries. In the new two pipe system, only one heat source is supplied to a house and partitioned into room heating and warm water supply by household substation. So the effective distribution of supplied heat source in accordance to user intention is very important. This paper presents the development and performance test of three-way proportional control valve for a combined heat source system in district heating. The proposed valve is controlled to partition heat source into two different directions : hot water distributor for space heating and household substation for warm water supply in response to the pressure drops of tap water caused by the user. The performance investigation is shown within 3% of error compared to the theoretical model of the three-way proportional valve and its controllability is verified.

• 한국주거학회논문집
• /
• 제19권1호
• /
• pp.79-88
• /
• 2008

Hot water is used by having a wash, dishes, taking tub and drinking water in residential buildings, and the use objective is to raise comfort of human body sense, washing and sterilization effect and so on. Cold & hot water supply system is understanded simpler than HVAC systems relatively, so it is true that pace of performance improvement is slower than other systems for plan and technical development. In this study, the performance evaluations are conducted under the condition of composition ratio by 1:1 for cold & hot water supply manifold system using functionally complex valves such as constant flow regulating valve and 3-way mixing valve in the area of $105.6m^2$ apartment which consist of the largest part of the whole apartment. Also, flow rate related to simultaneous use of faucets and change of hot water temperature are compared with the existing method.

• 설비공학논문집
• /
• 제5권3호
• /
• pp.157-168
• /
• 1993

Pipe network of hot water heat supply system in an apartment house was analyzed. Flowrate and supply heat capacity of each household in which constant flowrate balancing valve is installed in a single zone system were calculated and the results were investigated. In the existing piping system, the non-uniformity of heat supply with floors due to the static pressure and temperature difference between supply main and return main can not be avoided and this tendency get intense with the increase of the height of building. The non-uniformity of heat supply can be prevented by the installation of balancing valve at each household, however if the performance of supply pump is not sufficient to overcome the energy loss due to the installation of balancing valve for constant flow rate or if the selection of the valve capacity is not adequate, the valves will may lose their controllability.

• 설비공학논문집
• /
• 제11권4호
• /
• pp.511-517
• /
• 1999

Determining the simultaneous flow rate in any particular section of piping is the important step in order to determine the size of water supply piping. Now we are using the diversity curve of common water closet in order to determine the simultaneous flow rate of water supply piping, but there is a difference between a determined flow rate of general water closet and that of water closet for water saving. This study aims to find out the fixture unit of a flush valve type water closet for water saving in office building, and to determine the correlation between the fixture units and peak flow rates on the basis of the probability theory. A flush valve type water closet for water saving that have a 7.5 second duration of flush operation with an average design flow rate 72 $\ell$/fin was considered. Simulation results indicate that the number 5 is shown to be reasonable to the fixture unit of water closet for water saving. And the design can be undersized considerably with the revised diversity curves using modified fixture unit.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.161-169
• /
• 2015

A fire sprinkler system is very important to extinguish fire in the building. The sprinkler system initiates sprinkler discharge if the detection system identifies a developing fire and opens the pre-action valve. However, pre-action fire sprinkler systems mainly installed in the underground parking lot at the apartment complex do not properly operate at fire if the connection type of fire sprinkler systems does not properly installed and operated. This study identified the relationship between fire dispersion & damage and the connection type of water supply in the sprinkler system from many fire cases at the apartment complex in South Korea. In addition, this study also identified the water supply differences and characteristics between South Korea and foreign countries. The main purpose of this study is also to improve the water connection types in the sprinkler system that can reduce the potential failures of pre-action valve operation through electrical signal system. The study also suggests the improvement plan for water connection types in pre-action fire sprinkler system that can minimize potential failure of pre-action fire sprinkler system. The suggestions for revising the fire safe standard in South Korea includes letting the water supply pipe of sprinkler system water inlet connect to the second side of pre-action valve and the water flow device that can minimize potential failure of sprinkler system.

• 한국지열·수열에너지학회논문집
• /
• 제17권3호
• /
• pp.1-12
• /
• 2021

In this study, the effects of various operational conditions for floor radiant heating system were researched by experiments. Hot water supply set temperature, indoor air set temperature and supply water flowrate were considered as operational conditions. The control method for this system is On-Off control of automatic thermostatic valve. The purpose of this study is to evaluate indoor thermal control characteristics and energy performance, respectively. As a result, if lower supply water temperature is applied, the supply and return temperature difference is reduced and energy consumption of heat supply is also reduced.

• 한국유체기계학회 논문집
• /
• 제8권5호
• /
• pp.22-28
• /
• 2005

As the water supply facilities are recently getting larger, the domestic waterworks become multi-regional water supply system. Large water supply facilities generally consist of the intake pumping station, water treatment plant and water supply/distribution facilities. Although the pumping stations and the pipeline systems are used to pump up water, it often happens pipeline damage and flooding accident by the water hammer. In this paper, the intake pumping station is guaranteed by both the computer simulation and the field test analysis. This study is contributed to the safe operation program for the pumping station in which results of the adjustment on the safety plan of the pumping station, the air valve and the valve closing time.