• 한국표면공학회지
• /
• 제29권6호
• /
• pp.781-787
• /
• 1996

Silicom oxide films with good water repellency were prepared by rf plasma-enhanced CVD (rf-PECVD) using four kinds of organosilicon compound, which had different number of methyl ($CH_3$) groups, and oxygen as gas sources. The differences in the deposition rates, film composition and film properties were studied in detail. Water repellency depended on the number of $CH_3$ groups in the organosilicon compounds and the partial pressure of oxygen in the plasma. The highest contact angle for water drops, about 95 degrees, was obtained when trimethy lmethoxy silane (TMMOS) was used. The contact angle decreased with the amount of oxygen gas introduced into the plasma. The dissociation of $CH_3$ groups by adding oxygen was comfirmed by Fourier transform infrared spectroscopy(FTIR) and X-ray photoelectron spectroscopy (XPS). The optical properties were estimated by double-beam spectroscopy and ellipsometry. The transmittance of the glass plate coated by the film prepared with tetramethoxy silane (TMOS) was about 90% and the refractive index of film was 1.44. This value was smaller than the refractive index of a glass plate(soda lime glass, refractive index is 1.515) and this film played a role of anti-refractive coating.

• Korean Chemical Engineering Research
• /
• 제57권6호
• /
• pp.749-757
• /
• 2019

Methyltrimethoxysilane (MTMS)과 trimethylethoxysilane (TMES)을 출발물질로 사용하여 여러 종류의 용매에 용해시킨 후 다양한 종류의 촉매를 사용해 물과의 가수분해 및 중축합반응을 진행시켜 비불소계 발수 코팅 용액을 제조하였다. 또한 이 코팅 용액을 냉연 강판 위에 스핀 코팅하고 열 경화시켜 발수 코팅 도막을 제조 하였다. 이 과정 중 촉매와 용매의 종류 변화가 생성된 코팅 도막의 발수성에 미치는 영향을 연구하였다. 강산인 염산과 질산을 촉매로 사용한 경우에는 용액 내에 siloxane polymer들의 응집이 발생한 흰색의 불투명 상태를 나타냈다. 반면에 약산인 아세트산, 인산과 옥살산을 사용한 경우에는 투명하고 침전이 없는 안정한 용액 상태를 보였다. 이로 인해 강산인 염산과 질산을 사용한 경우의 코팅 도막의 접촉각은 각각 $58^{\circ}$와 $92^{\circ}$로 낮은 발수성을 보인 반면에 약산인 아세트산, 인산과 옥살산으로 제조된 경우에는 각각 $101^{\circ}$, $103^{\circ}$, $116^{\circ}$의 접촉각을 보여 높은 발수성을 나타내었다. 또한 이소프로판올과 에탄올을 용매로 사용한 경우에는 용액 내에서 siloxane polymer들의 응집이 일어나 불투명한 침전이 발생한 상분리 현상을 보인 반면 메탄올, 에틸아세테이트와 메틸에틸케톤을 용매로 사용한 경우에는 투명하고 침전이 없는 안정된 상태를 나타내었다.

• 공업화학
• /
• 제33권6호
• /
• pp.588-593
• /
• 2022

MgO 입자 표면에 첨가된 P₂O₅의 가수분해, 발수성, 그리고 절연 거동에 미치는 영향을 조사하였다. MgO 표면에 첨가된 P₂O₅는 가수분해반응 억제와 발수성을 동시에 나타내기 때문에 독특한 절연거동을 나타내었다. 따라서 절연거동은 MgO의 표면수화반응에 의한 Mg(OH)₂와 OH^-전하 전달비와 친수성에 반비례하였다. 시효에 따른 MgO의 절연성은 표면수화반응, 첨가된 도펀트 종의 밴드갭, 그리고 도펀트의 친수성과 소수성에 강한 영향성과 의존성을 나타내었다. 마지막으로 친수성인 MgO의 표면수화반응을 억제하는 전기절연성을 발현하여 열전달매체 응용분야에서 큰 잠재력을 제공하는 것으로 나타났다.

• 품질경영학회지
• /
• 제16권1호
• /
• pp.43-48
• /
• 1988

Most of silicone used for water repellent finish is MHP (methyl hydrodiene polysiloxane), which is formed by hydrolysis and condensation polymerization of MHD (methyl hydrodiene dichlorosilane: Me H Si $Cl_2$). The cross-linking theory explains the water repellent mechanism of MHP. The silicone finish on fiber could improve in handle, softness, abrasion resistance, soil repellency, tear strength and crease resistance, as well as water repellency. According to using method silicone-water repellent finishing agents, could be devided into air dry type and curing type. MHP is the typical curing type of water repellent finishing agent, and this type requires the curing temperature above $150^{\circ}C$ at least. High curing temperature is the very drawback of this curing type. For this reason, there has been global interest in the lowering of its temperature. The objective of this study is to investigate merits of alkali treatment for silicone finishing by ANOVA and LSD (least significant difference).

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.100-106
• /
• 2011

UV-curable water-repellent finish was carried out to impart one-side repellency to the PET fabrics using a formulation of a UV-active fluorocarbon agent and a water soluble photoinitiator. The aqueous formulation was padded on the PET fabrics and it was subsequently UV-cured. The unirradiated side of the cured fabrics was made to wetteable to water by the prolonged UV/ozone irradiation. The influence of photoinitiator concentration, agent concentration and UV energy for photodegradation on the performance of the finished fabrics were investigated. The difference in the functional property of front and back sides was examined by measuring water repellency at each side of the treated fabrics, which resulted in four rating difference between two-side. The UV-cured and photodegraded PET surfaces were characterized by ATR, ESCA and FE-SEM.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.207-212
• /
• 2014

With increased interests in environmental issues, people are looking for new materials that serve special and bio-activated functions. One of interesting materials is charcoal which has excellent adsorption ability for harmful volatile organic compounds, fireproof performance, far-infrared ray emission, and electromagnetic shielding. Since non-crack carbonized board was developed from wood-based composite materials, carbonization method might be applied to woodcraft products such as wood cup and bamboo. In this study, manufacture of wood charcoal bowl was conducted with carbonization method developed in 2009 in order to activate wood products market. Ash tree(Fraxinus rhynchophylla) cup was carbonized at $600^{\circ}C$ with two pretreatments which were phenol resin and wood tar solution treatment. After carbonization of ash tree cup, non-crack charcoal cup were successfully manufactured. Phenol resin treatment affected on charcoal cup manufacturing both positively and negatively. For a positive way, it prevented shrinkage. For a negative way, it decreased water repellency. On the contrary, wood tar treatment accelerated shrinkage a bit and increased water repellency. Based on the results, wood tar can be used as pre-treatment solution for reducing post-treatment costs. We confirmed woodcraft products can be carbonized without deformation, so carbonization may provide a high value-added products from wood.

• 한국환경과학회지
• /
• 제13권10호
• /
• pp.947-953
• /
• 2004

Waterborne fluorinated acrylate copolymer (WFAC) for surface modification of textile was synthesized from perfluoroalkyl ethyl acrylate, octadecyl acrylate, glycidyl methacrylate, surfactant and 3,3 methyl-methoxy butanol. The structures of the synthesized WFAC were determinated by FT-IR and $^{19}F-NMR$ analysis. The thermal stability investigated with DSC and TGA was decreased with increasing the content of fluorinated acrylate in the copolymer. However, the particle sizes of WFAC were increased with increasing the content of fluorinated acrylate in the copolymer. The surface energies calculated by contact angles of WFAC were in the range of 29.80$\~$13.41 dyne/cm. On the observing SEM of the textile surface treated with WFAC, the textile was swollen and compacted with increasing the concentration of water repellency agent. WFAC synthesized in this study showed a good water repellency.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.50-58
• /
• 2020

발수제를 콘크리트 표면에 함침시키는 방법은 콘크리트의 균열이 발생할 경우, 기대하는 내구성을 확보할 수가 없다. 최근, 다양한 방수 및 발수 재료들을 콘크리트나 모르타르 내부에 혼입하여 균열 내부에서도 발수성을 확보하였으나 압축강도가 크게 저하되었다. 압축강도 저하를 극복하기 위해 아직까지 유기물과 무기물의 장점들을 동시에 이용한 연구가 없기 때문에, 본 연구에서는 유기물과 무기물을 적절히 혼합한 유무기 복합 발수제를 모르타르에 혼입하여 물리적 특성 및 발수성능을 평가하였다. 유무기 복합 발수제 혼입 시 Liquid 시험체에 비해 플로우 약 10%, 공기량이 약 50% 감소하였으며, P6L1 시험체의 경우, 기존 발수제인 Powder와 같은 39.5MPa로 무혼입 모르타르 대비 약 3.5%의 압축강도 저하를 확인하였다. 발수성능도 유무기 복합 발수제 혼입 시험체가 기존의 발수제 혼입 시험체인 Powder보다 높은 발수성을 확인하였으며, 염화물 침투 저항성 평가결과, 유무기 복합 발수제 혼입 시험체가 무혼입 모르타르 대비 약 45% 통과 전하량이 감소되는 것을 확인하였다. 이상의 실험을 종합하면, Powder 발수제와 Liquid 발수제를 5:1의 비율로 혼입한 P5L1 유무기 복합 발수제가 압축강도 저하 방지 및 발수성능 확보를 위하여 가장 합리적이라고 판단된다.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.327-334
• /
• 2018

출발물질로서 테트라에톡시실란(TEOS)과 메틸트리메톡시실란(MTMS)을 사용하여 졸-겔법에 의해 발수성 코팅용액을 제조하였다. 이 용액을 냉연강판 위에 스핀 코팅하고 열처리하여 비불소계 발수 코팅 도막을 제조 하였다. 이 과정 중 MTMS/TEOS의 몰 비, 물 농도 및 암모니아 농도가 코팅 도막의 발수성에 미치는 영향을 연구하였다. MTMS/TEOS의 몰 비를 1~20으로 변화시켜 제조 한 코팅 도막의 접촉각은 MTMS/TEOS 몰 비가 10 일 때 최대 수치인 $108^{\circ}$를 나타내었다. 반면에 물의 첨가량을 증가시킴에 따라 코팅 도막의 접촉각이 증가하여 발수성이 향상되었다. 또한 암모니아의 첨가량이 커질수록실리카입자의 크기가커져 실리카입자의표면 거칠기가증가하므로 발수성이 증가하였다.

• 한국의류학회지
• /
• 제17권4호
• /
• pp.577-586
• /
• 1993

Pesticide protective clothing has not been frequently worn due to its lack of thermal comfort. It is important to develop fabrics which can allow the wearer to work in comfort. One of the possible way to achieve the goal is to produce fabrics with a water- and oil-repellent finish which would resist pesticide penetration but maintain some breathability. The purpose of this study were to evaluate the pesticide barrier properties of untreated and water- and oil-repellent finished nonwoven fabrics. Three types of nonwoven fabrics(Tyvek, Sontara and Kimlon) were used as test specimens. By pad-dry-cure method, each of the specimen was treated with fluorocarbon. The pesticide barrier properties (amount of pesticide penetration and residue) were measured by the gas chromatography. The performance properties of untreated and treated specimens were evaluated with respects to water pepellency(KS K 0590), oil repellency(AATCC 118), water resistance(KS K 0591, AATCC 42), water vapor transmission (KS A 1013) and air permeability(KS K 0570). The results of this study were as follows : 1) The untreated Sontara showed much more amount of pesticide penetration than untreated Tyvek and Kimlon, while the treated Sontara showed little amount of pesticide penetration. 2) After laundering, the amount of pesticide residue in the untreated and treated Sontara was less than that in Tyvek and in Kimlon. 3) Water- and oil-repellent finish improved water repellency, oil repellency, and water resistance of specimens. 4) The untreated Sontara and Kimlon showed higher water vapor transmission and air permeability than untreated Tyvek. Water vapor transmission and air permeability of treated specimen decreased compared to those of untreated.