• 펄프종이기술
• /
• 제47권4호
• /
• pp.102-108
• /
• 2015

Agricultural cultivation papers treated with water repellent were investigated in order to analyse mechanical properties and durability. The water repellency was optimal when papers are treated with Wb and Sa water repellents. Also, WCPs with 5% water repellent were more effective than those of 3 and 10%. In addition, water repellency of WCPs with Wb and Sa water repellents were kept constant in correlation with aging time. Finally, WCP with Wb water repellent possesses efficiency in terms of mechanical properties and durability.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.163-164
• /
• 2014

This study is conducted for prevent spread of penetration water and water leakage through non-woven fabric between PVC sheet and PVC sheet in the PVC composite waterproofing sheet of a multi-layer structure. For this, carry out absorption amount test to confirm spread resistance performance after manufacturing PVC composite waterproofing sheet of a multi-layer structure using water-repellency processed non-woven fabric. As a result of test, weight of water-repellency processed non-woven fabric increased to 1.178g, Compared with beginning and there are not penetration water.

• 폴리머
• /
• 제31권1호
• /
• pp.31-36
• /
• 2007

플라스마 표면처리는 전체적인 물성은 유지하고 표면의 특성만을 변화시킨다고 전해지고 있다. 이번 연구에서는 플라스마 처리에 의해 높은 발수성을 나타내는 나일론 6 섬유로의 개질을 시도하였다. 발수성을 나타내는 나일론 섬유는 가스 종류, 처리시간, 인가 파워를 변수로 하여 RF 진공 플라스마 시스템에서 처리되었다. 플라스마 처리된 섬유의 표면을 scanning electron microscopy(SEM)과 atomic force microscopy(AFM)으로 모폴로지 변화를 살펴보았으며, 기계적 특성과 고분자 고유의 특성을 인장강도와 Differential scanning calorimetry(DSC), thermo-gravimetric analysis (TGA)로 각각 분석하였다. 또한 나일론 섬유의 발수성 평가는 물방울 흡수시간으로 테스트를 실시하였다. 이러한 결과들은 플라스마 표면처리로 인해서 나일론 섬유의 발수성이 향상됨을 나타내었다.

• 한국의류학회지
• /
• 제21권1호
• /
• pp.3-9
• /
• 1997

From the standpoint of end-use and practical performances, attention was focused preparing cotton fabrics which posses good dyeability as well as water repellency. The results are summarized as follows, as far as findings obtained from this study is concerned. The fluoro chemical (FC) water repellent finished cotton fabrics exhibited good dyeing properties and colorfastness to washing. Furthermore, the DMDHEU durable-press and FC water repellent finishes in a single pad bath resulted in excellent durable press performance and good water repellency.

• 한국응용과학기술학회지
• /
• 제13권1호
• /
• pp.41-46
• /
• 1996

Durable softening water repellents such as PODCWs were prepared by blending cationized compound of poly(octadecyl methacrylate-co-2-diethylaminoethyl methacrylate), of which synthetic methods were reported in the previous paper, activated polythylene, waxes, and emulsifiers. Water repellency of prepared PODCWs was measured by performing water repellent finish to various fabrics, PODCWs showed a good water repellency for P/C blended fabrics and their repelling tendency was in the order of P/C blended fabrics>cotton fabrics>nylon taffeta. The initial water repellencies of PODCW-1 and PODCW-2 were 100 and $100^{-}$ points, respectively, for P/C blended fabrics. And also, PODCW-1 and PODCW-2 were confirmed as durable water repellents with the results of making little difference of water repellency as ${\pm}5$ point after and before washing.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.137-144
• /
• 1996

Durable softening water repellents such as PODCW, PDDCW, and PEDCW were prepared by blending cationized polymers, fatty carbamide, waxes, and emulsifiers. The cationized polymers included poly (octadecyl methacrylate-co-2-diethylaminoethyl methacrylate) [PODC], poly (n-dodecyl methacrylate-co-2-diethylaminoethyl methacrylate) [PDDC]and poly (2-ethylhexyl methacrylate-co-2-diethylaminoethyl methacrylate) [PEDC]. After the PET fabrics were treated with these water repellents, water repellency, softness, and durability of the PET fabrics were examined by various methods : water repellency by the hydrostatic pressure and the contact angle methods, softness by crease recovery and tearing strength, and durability by washability, respectively. Rating of water repellency of PET fabrics treated with PODCW was $80^{+}$, but those treated with PDDCW and PEDCW were not high enough to be used in industry.

• 한국염색가공학회지
• /
• 제24권3호
• /
• pp.173-179
• /
• 2012

Silk fabric treated with fluorocarbon resins (Asahi Guard AG-7005 and AG-E061) were washed and subsequently heat treated varying the washing cycles and the temperature. After the processing, the water and oil repellencies, and contact angle to water were evaluated. The water and oil repellencies decreased by the washing and recovered by following heat treatment. Also ESCA measurement was carried out to investigate the surface chemical composition of the treated fiber. The $F_1s$ intensity of the treated fabric decreased by the washing and recovered by the subsequent heat treatment. On the other hand, the $O_1s$ intensity increased by the washing and decreased by following heat treatment. From the results, it is clear that change of the water and oil repellencies of the silk fabric treated with fluorocarbon resin occurred by the washing and subsequent heat treatment. Considering a change of the water repellency of the silk fabric treated with fluorocarbon resin, it seems likely that the fluoroalkyl group of the fluorocarbon resin rotates from surface to inside of the fiber by the washing to adapt to the hydrophilic circumstance, and the orientation of the fluoroalkyl groups of the resin disturbed by the washing recovers the orientation to the fiber surface after the subsequent heat treatment.

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.24-35
• /
• 1999

This study was carried out to investigate the changes of surface characteristics of polyester fabrics on the deposition and the removal of oily soils from polyester fabrics in detergency, The relations between the removal of soil and the changes of surface properties of polyester fabrics treated with water- and oil-repellent agents were discussed before and after various wash cycles. Two kinds of fluoropolymers were selected as water-and oil-repellent finishing agents. The effects of water- and oil-repellent finishes were determined by the water repellency and oil repellency. The surface properties of untreated and treated polyester fabrics were evaluated with respect to contact angle and wicking time. The treatment of polyester fabrics with fluoropolymers improved efficiently water repellency, oil repellency, contact angle and wicking time. But those properties were greatly decreased after 3 times of wash cycles in detergency The deposition of oily soils on the untreated fabrics was drastically increased with increasing of wash cycles. The deposition and the removal of oily soils from fabrics treated with fluoropolymer having hydrophobic components were very low after various wash cycles. The deposition and the removal of oily soils on the fabrics treated with fluoropolymer having hydrophilic components were high comparatively after various wash cycles. Even though the surface properties of treated fabrics were greatly decreased with the increasing of wash cycles, the remains of oily soils on the fabrics were lower than those of untreated fabrics in various wash cycles. But the remains of soils were drastically increased after 10 times of wash cycles in any cases.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.477-484
• /
• 2004

콘크리트 구조물의 내구성 향상을 위한 대책의 일환으로 "면도포용 액상형 흡수방지재"가 적용되고 있으며, 이의 품질관리 차원에서 "내흡수성" 및 "침투깊이"에 관한 최저 요구성능이 규정되어 있다. 그러나 이 규정은 시간경과에 따른 성능변화 및 콘크리트 구조물에 미치는 외부환경요인을 배제한, 즉 흡수방지재의 초기 정착상태를 전제로 하고 있다. 이에 따라 본 연구에서는 흡수방지재의 재령에 따른 내흡수성능 변화 측정을 위해 외부폭로 상태에 시험체를 방치하고, 일정기간 간격으로 침투깊이와 물흡수량을 측정하였으며, 이를 일반기건 시험체와 수침지 시험체의 측정값과 비교 $\cdot$분석하였다. 또한 복합용도 차원에서 흡수방지재 도포 후 폴리머 시멘트 도막재를 시공할 경우의 부착강도로 측정하였다. 이때 사용된 흡수방지재는 침투깊이가 우수하고 환경친화적인 수성의 실리론 유화제품으로 하였다. 실험결과 흡수방지재는 동일 재령에서 도포량, 고형분 함량이 클수록 침투깊이가 크고 물흡수량은 작게 나타나지만, 재령이 증가함에 따라 그리고 수분이 공급되는 경우에 보다 원활히 내부로 이동하여 침투깊이는 증가한다. 그러나 이에 반해 물흡수량은 점차 증가하는데, 이는 내흡수성을 발현하는 활성성분이 내부로 용해 이동하여 콘크리트 표면의 활성성분 함량이 감소되기 때문으로 판단된다.

• 한국염색가공학회지
• /
• 제20권6호
• /
• pp.26-34
• /
• 2008

Wool fabric having high moisture content were treated with fluorocarbon-based water and oil repellent finishing agents by pad-dry-cure system. Three types of finishing agents which were regular-type or nano-type were adapted to compare the surface chemical composition, water and oil repellent property, crease recovery angle, and durability to repeated laundering. From the surface chemical compositions resulted by ESCA and C1s curve-fitting, it was shown that the regular-type finishing agent were easily taken off from the finished wool fabrics after repeated laundering. On the other hand, the fluoroalkyl groups of nano-type finishing agents turned round from fabric surface to fiber internal after repeated laundering. The water repellency of the wool fabrics treated with regular-type agent had a little changes according to the treatment condition changes and sharply decreased with repeated laundering. However, these values when treated with nano-type agents increased with the concentration and cure temperature and were maintained after 20 times laundering. The wool fabrics treated with nano-type agent had a great oil repellency irrespective of treatment conditions. Furthermore, the wrinkle recovery values of the wool fabrics treated with nano-type agents were higher than those of the fabrics treated with regular-type agent and were unchanged after 20 times laundering.