• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.49-50
• /
• 2006

This study experimented to observe an influence of experimental conditions on production characteristics of slurry ice by putting ball into test section to disturb ice adhesion. And at this experiment it used ethylene glycol-water solution and the concentration is 20wt%. The experimental apparatus was constructed of ethylene glycol-water solution and slurry ice storage tank, brine tank. pumps for ethylene glycol-water solution and brine circulating, a mass flow-meter, data logger for fluid temperature measuring and a vertical circular tube with two copper tubes as test section. The experiments were carried out under various conditions, with mean velocity of fluid at the entry ranging from 0.07 to 0.13m/s and ball diameter is 10mm, 15mm. Also ball filling rate is 33%, 50%.

• Ocean Systems Engineering
• /
• 제1권3호
• /
• pp.207-222
• /
• 2011

A stabilized incompressible smoothed particles hydrodynamics (ISPH) method is utilized to simulate free falling rigid body into water domain. Both of rigid body and fluid domain are modeled by SPH formulation. The proposed source term in the pressure Poisson equation contains two terms; divergence of velocity and density invariance. The density invariance term is multiplied by a relaxed parameter for stabilization. In addition, large eddy simulation with Smagorinsky model has been introduced to include the eddy viscosity effect. The improved method is applied to simulate both of free falling vessels with different materials and water entry-exit of horizontal circular cylinder. The applicability and efficiency of improved method is tested by the comparisons with reference experimental results.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.431-439
• /
• 2020

Soil-water retention curve (SWRC) contains key information for the application of unsaturated soil mechanics principles to engineering practice. The SWRC variables are commonly used to describe the hydro-mechanics of soils. Generally, these parameters are determined using the graphical method which can be time consuming. The SWRC is highly dependent on the pore size distribution (PSD). Theoretically, the PSD obtained by mercury intrusion porosimetry test can be used to determine some SWRC variables. Moreover, the relationship between SWRC and shrinkage curve has been investigated. A new method to determine total SWRC variables directly without curve-fitting procedure is proposed. Substituting the variables into linear SWRC equations construct SWRC. A good agreement was obtained between predicted and measured SWRCs, indicating the validity of the proposed method for unimodal SWRC.

• 한국해양공학회지
• /
• 제28권3호
• /
• pp.209-217
• /
• 2014

In the present study, the water impact loads on two-dimensional symmetric and asymmetric wedges were mainly studied. The impact pressure and force were measured during a vertical drop of the symmetric and asymmetric wedges. The measured pressure was compared with analytic solutions. The measured force at a local area of the wedge was compared with the integrated pressures and analytic solutions. Some findings on symmetric and asymmetrical wedge drops are presented, and the reliability of the force sensor used for the measurement of the local impact force is discussed.

• Korea-Australia Rheology Journal
• /
• 제16권2호
• /
• pp.63-73
• /
• 2004

Flow in a channel with an obstruction at the entry can be reverse, stagnant or forward depending on the position of the obstruction. These flow phenomena have potential applications in the control of energy and various flows in process engineering. Parameters that affect this flow inside and around the test channel are the gap (g) between the obstruction geometry and the test channel, the Reynolds number (Re) and the length (L) of the test channel. The influence of these parameters on the flow behavior was investigated using a flat plate obstruction at the entry of the channel. A low concentration polyacrylamide solution (0.018% by weight) showing a powerlaw fluid behavior was used as the fluid in this investigation. The flow phenomena were investigated by the velocity measurement and the flow visualization and their results were compared with numerical simulation. These results of low concentration polyacrylamide solution are also compared with the results of water published elsewhere (Kabir et al., 2003). The maximum reverse flow inside the test channel observed was 20% - 30% of the outside test channel velocity at a g/w (gap to width) ratio of 1 for Reynolds numbers of 1000 to 3500. The influence of the test channel length (L) and the Reynolds number (Re) on the velocity ratio ($V_i$/$V_o$: inside velocity/outside velocity in the test channel) are also presented and discussed here.

• 대한기계학회논문집B
• /
• 제35권9호
• /
• pp.891-896
• /
• 2011

본 연구에서는 사각 마이크로 채널의 열전달 특성을 연구하기 위한 실험을 수행하였다. 실험에 사용된 시료의 채널 수력직경은 $700{\mu}m$이며, 채널의 개수는 20개이다. 작동유체는 물이며, 작동유체의 입구 온도는 $20^{\circ}C$ 이다. 실험 변수는 Reynolds 수 400 ~ 800 및 열 유속 35 ~ 85 kW/$m^2$ 이다. 결과로, Reynolds 수가 큰 경우일수록 대류 열전달 계수가 증가하는 것으로 나타났으며, 열적으로 완전히 발달 된 영역에 대하여 대류 열전달 계수는 약 4.6 ~ 6.4 kW/$m^2^{\circ}C$로 나타났다. 또한, 사각 마이크로 채널에서의 열적 입구길이는 Reynolds 수가 커지는 경우일수록 길어지는 것을 알 수 있었으나, 열 유속의 변화는 입구길이에 영향을 미치지 않는 것으로 나타났다. 본 연구의 결과로 완전히 발달된 유동영역에 대하여 사각 마이크로 채널의 열적 특성을 나타내기 위한 Nusselt 수 상관식을 제안하였다.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.562-567
• /
• 2010

A One-Dimensional Water Flow and Contaminant Transport in Unsaturated Zone (FTUNS) code has been developed in order to interpret radionuclide migration in an unsaturated zone. The pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) for an unsaturated zone were measured by KS M ISO 11275 method. The hydraulic parameters of the unsaturated soil are investigated by using soil from around a nuclear facility in Korea. The effect of hydraulic parameters on radionuclide migration in an unsaturated zone has been analyzed. The higher the value of the n-factor, the more the cobalt concentration was condensed. The larger the value of $\alpha$-factor, the faster the migration of cobalt was and the more aggregative the cobalt concentration was. Also, it was found that an effect on contaminant migration due to the pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) was minute. Meanwhile, migrations of cobalt and cesium are in inverse proportion to the Freundich isotherm coefficient. That is to say, the migration velocity of cobalt was about 8.35 times that of cesium. It was conclusively demonstrated that the Freundich isotherm coefficient was the most important factor for contaminant migration.

• Nuclear Engineering and Technology
• /
• 제28권3호
• /
• pp.257-264
• /
• 1996

The conventional Equipment Environment Qualification (EEQ) envelope is developed based on the containment responses during the design basis events. The Safety Depressurization System (SDS) design without In-containment Refueling Water Storage Tank (IRWST) adopted in the Ulchin 3&4 challenges the conventional EEQ envelope during long term Feed and Bleed (F&B) operation due to the direct discharge of high mass and energy into the containment. Therefore, it is necessary to confirm that the containment pressure and temperature history during the long term F&B operation does not violate the conventional EEQ envelope. However, this subject has never been quantitatively assessed before. To investigate the success path of long term F&B operation this paper analyzes the thermal hydraulic response of the containment and Reactor Coolant System (RCS) until the completion of depressurization and cooldown of RCS into Shutdown Cooling System (SCS) entry condition. It is found that the SCS entry condition can be reached within 6 hours without violating the EEQ curve by proper operation of SDS valves, High Pressure Safety Injection (HPSI) pumps and active Containment Heat Removal System (CHRS). The suggested strategy not only demonstrates the feasibility of long term F&B operation but also can be utilized in the preparation of Emergency Procedure Guidelines (EPGs)

• 한국항해항만학회지
• /
• 제39권1호
• /
• pp.77-82
• /
• 2015

슬래밍은 선체가 파도와 부딪히며 선수, 선미에서 강한 충격압력을 받아 급격한 진동이 발생되는 현상이다. 이러한 슬래밍은 사람에게는 승선감의 불쾌감을 주고, 선체에는 구조적인 위험을 주며 화물의 안전과도 깊은 관계가 있다. 따라서 선박 설계기준에는 슬래밍에 의한 충격압력을 충분히 고려한 구조설계를 해야 한다. 본 연구에서는 자유낙하 하는 쐐기형 구조물의 중량 및 낙하높이의 변화에 따른 슬래밍 충격 압력 및 유동장의 유동특성을 알아보고자 실험을 수행하였다. 유동장의 계측은 2-프레임 그레이레벨 상호상관 PIV기법을 이용해 접수와 이수로 구분하여 실험하였으며, 충격압력의 계측은 압력계측장비인 Dewetron System을 이용하였다. 실험에서 모델과 자유수면간 이루는 각도는 $15^{\circ}$를 적용하였으며 이때, 중량의 변화는 1.5, 1.8 및 2.0kg이고 자유낙하높이는 100, 200 및 300mm로 하여 실험하였다. 실험값을 통한 중량의 변화에 따른 충격압력은 중량의 증가하는 것에 비례하여 충격압력 또한 증가했으며, 이러한 경향은 자유낙하 높이가 높을수록 영향을 많이 받았다.

• 한국지반공학회지:지반
• /
• 제12권6호
• /
• pp.139-152
• /
• 1996

불포화토에 대한 흐름문제를 해석하기 위해서는 비선형으로 표시되는 부간극수압과 함수비 사이의 관계를 알아야 한다. 본 논문에서는 주문진 표준사, 한강모래 및 세립함유율이 다른 몇가지 화강풍화토에 대하여 2가지 실험기구로 이 관계를 측정하고 그 특성을 규명하였다. 여기서 얻은 자료를 이용하여 이 관계를 실험없이 추정가능한 경험식에 쓰이는 경험상수들을 얻었다. 몇가지 경험식중 van Genuchten(1980)의 것이 실험곡선과 잘 부합된다. 화강풍화토에 대해서는 세립함유율(No.200체 통과율)의 증가에 따라 경험상수들도 거의 일정하게 증가하는 경향을 보인다는 것을 알게 되었다. 따라서 이 관계를 이용하여 화강풍화토에 대한 함수특성곡선의 추정이 가능하다.