• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1182-1196
• /
• 2014

In problems of global hydroelastic ship response in severe seas including the whipping problem, we need to know the hydrodynamic forces acting on the ship hull during almost arbitrary ship motions. In terms of ship sections, some of them can enter water but others exit from water. Computations of nonlinear free surface flows, pressure distributions and hydrodynamic forces in parallel with the computations of the ship motions including elastic vibrations of the ship hull are time consuming and are suitable only for research purposes but not for practical calculations. In this paper, it is shown that the slamming forces can be decomposed in two components within three semi-analytical models of water entry. Only heave motion is considered. The first component is proportional to the entry speed squared and the second one to the body acceleration. The coefficients in these two components are functions of the penetration depth only and can be precomputed for given shape of the body. During the exit stage the hydrodynamic force is proportional to the acceleration of the body and independent of the body shape for bodies with small deadrise angles.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권3호
• /
• pp.211-224
• /
• 2011

This is a written version of an hour-long lecture delivered by the author on June 30, 2011, as Plasmadynamics and Lasers Award Lecture at the AIAA 2011 summer conference in Honolulu, Hawaii. The author proposes that two areas of planetary entry physics be pursued in the future: outer planet aero-capturing and study of aerodynamics of meteoroid entries, both for the purpose of advancing the understanding of the possible extraterrestrial seeding of building blocks of life. For outer planet aero-capturing, the author proposes to develop new shock tube facilities that will produce up to 30 km/s of shock speed without causing photo-ionization of the driven gas by the radiation from the hot driver gas. Regarding meteors, the author proposes to carry out laboratory testing of the Tunguska event and of the seeding of amino acid molecules using a ballistic range which shoots a snowball laden with amino acid molecules toward a water surface.

• 한국환경농학회지
• /
• 제35권1호
• /
• pp.15-23
• /
• 2016

BACKGROUND: Water quality is of concern to water utility operators, public health officials, and populations using the water. If any contaminant is released from a point of entry, it could be spread rapidly throughout the water stream. So the identification of the location of the points of entry and its release history are critical informations to establish the management strategy.METHODS AND RESULTS: Aniline, nonylphenol, pentachlorophenol and formaldehyde in 39 surface water samples were analysed using Gas chromatography-mass spectrometry (GC-MS) methods. Formaldehyde, aniline and nonylphenol were mainly detected in the near sites where industrial waste water and domestic sewage were discharged into stream. But pentachlorophenol was detected in the downstream samples where pulp manufacturing plants were operated.CONCLUSION: Results indicate that pentachlorophenol found in main stream of Guem river was mainly introduced from pulp manufacture industries. Otherwise, formaldehyde, aniline and nonylphenol were mainly contaminated from the industrial waste water and domestic sewage.

• 한국농공학회지
• /
• 제36권4호
• /
• pp.87-94
• /
• 1994

The aim of the work descrihed in this paper is to study a characteristics of an unsaturated soil for the different matric suctions. To this end, a series of suction controlled isotropic and triaxial compression tests is conducted on silty sands. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. Total volume change, air and water volume changes are measured by the device made for the experiment. The specimens are compacted using a half of Proctor compaction energy and with the water contents of 5% drier than the optimum moisture contents. Isotropic compression and triaxial compression tests are conducted on the specimen at each equilibrium state of matric suction. From test results, volume changes and deviator stresses are analyzed at each state and their relationships are formulated.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.166-175
• /
• 1999

This paper describes a design and performance evaluation of robust controller which overrides unstable motion and pulls out quickly after water entry of underwater vehicle dropped from aircraft or surface ship. We use 6-DOF equation for model of motions and assume parameter uncertainty to reflect the difference of real motion from modelled motion equation. we represent a nonlinear system with uncertainty as Takagi and Sugeno's(T-S) fuzzy models and design controller stabilizing them. The fuzzy controller utilizes the concept of so-called parallel distributed compensation (PDC). Finally, we confirm stability and performance of the controller through computer simulation and hardware in the loop simulation (HILS).

• 한국지반공학회논문집
• /
• 제28권2호
• /
• pp.33-42
• /
• 2012

본 연구에서는 토립자의 입경과 입도분포가 불포화토의 흙-수분특성에 미치는 영향을 검토하고자 하였다. 이를 위해 축이동기법이 적용된 시험장치를 이용하여 현장에서 채취한 새만금실트에 대해 함수특성시험을 실시하였다. 비교를 위해 주문진 표준사에 대해서도 시험을 실시하였다. 시험으로부터 측정된 모관흡수력과 체적함수비를 토대로 van Genuchten 모델에 대한 흙-함수특성곡선을 추정하였다. 추정된 함수특성곡선의 비교분석결과 포화체적함수비, 잔류체적함수비 그리고 공기함입치 모두 모래보다 실트에서 더 높게 나타났으며, van Genuchten 모델의 계수 ${\alpha}$, $n$, $m$ 모두 실트보다 모래에서 더 크게 나타났다. 이는 불포화토의 흙-함수특성곡선은 흙의 구조적 특성(간극크기, 형태, 분포)과 밀접한 관계를 가지며 상대적으로 입경이 크고 입도분포가 불량한(다시 말해, 간극크기가 크고 간극분포가 균등한) 조립토일수록 포화체적함수비, 잔류체적함수비, 그리고 공기함입치가 작고, 모관흡수력 변화에 따른 체적함수비의 변화율이 크며, 따라서 전이 영역의 범위가 좁게 나타나는 경향이 있다는 것을 보여준다.

• 한국음향학회지
• /
• 제33권1호
• /
• pp.10-20
• /
• 2014

본 연구에서는 입수 충격에 의한 수중 순간 소음을 연구하기 위해, 황해에서 발사대를 이용하여 해상 실험을 진행하였다. 해상시험선인 청해호 우현상에서 발사대를 이용하여 실린더 몸체를 수직으로 발사하였으며, 이때 발생하는 소음을 하이드로폰으로 측정하였다. 실험에서는 원통형, 원뿔형, 반구형 두부 형상을 가진 3가지 종류의 실린더 몸체가 사용되었다. 측정된 신호는 시간적으로 확연하게 구분되어 3단계로 전시되었다 : (1) 초기 충돌 및 물체 진동단계, (2) 개방 공동 유동 단계, (3) 공동 붕괴 및 거품 진동 단계. 대부분의 경우, 거품 진동 단계의 파형이 초기 충돌 및 물체 진동 단계에 비해 우세하게 나타났다. 공동이 붕괴되기 시작하는 핀치 오프 시간은 0.18 ~ 0.2 s에 발생하였으며, 평균 거품 지속 시간은 0.9 ~ 1.3 s로 지속되었다. 입수 충격 소음은 100 Hz 이하의 대역에서 에너지가 집중되어 있었으며, 생성되는 소음은 두부 형상, 물체 질량, 발사 속도에 의해 영향을 받았다. 결과적으로, 거품 주파수에서 에너지 스펙트럼 밀도의 크기는 원통형, 원뿔형, 반구형 순으로 나타났으며, 동일 입수체에 대해서는 초기 에너지가 클수록 거품 주파수에서 에너지 스펙트럼 밀도가 크게 나타났다. 최종적으로, 버블이 폭발하는 물리적 현상을 기반으로 모의된 신호와 계측 값간 비교 결과 만족스러운 결론을 얻을 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권2호
• /
• pp.272-279
• /
• 2003

This study aimed to understand the effects of transporting ice slurry Particles through Pipes with branches. The experimental apparatus was constructed as ice slurry mixing tank. vortex pump, manometers for differential pressure measuring. IPF(ice packing factor) measuring instruments and branches as test sections. The experiments were carried out under various conditions. with concentration of water solution ranging between 0∼20wt% and velocity of water solution at the entry ranging between 1.5∼2.5m/s. The differential Pressure and IPF between the pipe entry and exit were measured. and flowing form was checked throughout the experiment. The pressure loss in 3d branches appeared compared with 6d branches so that it was very high. In the pressure loss of the inside and outside of branches. 6d branches was showed the difference. but was agreed in 3d branches The pressure loss according to concentration of water solution, low value appeared at 10wt% in 6d branches, at 20wt% in 3d branches. The pressure loss according to velocity, did not show large difference. The change of IPF at outlet, appeared +15∼-25% in 6d branches and 0∼-20% in 3d branches. The difference of IPF at the inside and outside of branches. appeared 10∼15% in 6d branches and maximum 5% in 3d branches.

• Geomechanics and Engineering
• /
• 제20권5호
• /
• pp.411-420
• /
• 2020

Numbers fitting-curve equations have been proposed to predict soil-water retention curve (SWRC) whose parameters have no definitude physical meaning. And these methods with precondition of measuring SWRC data is time-consuming. A simplified directly method to estimate SWRC without parameters obtained by fitting-curve is proposed. Firstly, the total SWRC can be discretized into linear segments respectively. Every segment can be represented by linear formulation and every turning point can be determined by the pore-size distribution (PSD) of Mercury Intrusion Porosimetry (MIP) tests. The pore diameters governing the air-entry condition (AEC) and residual condition (RC) can be determined by the PSDs of MIP test. The PSD changes significantly during drying in SWR test, so the determination of AEC and RC should use the PSD under corresponding suction conditions. Every parameter in proposed equations can be determined directly by PSD without curve-fitting procedure and has definitude physical meaning. The proposed equations give a good estimation of both unimodal and bimodal SWRCs.

• 멤브레인
• /
• 제25권3호
• /
• pp.216-222
• /
• 2015

막증류(membrane distillation, MD)용 분리막의 장기 내구성능에 영향을 미치는 인자인 소수성 분리막의 젖음 현상에 대한 평가 지표로 사용되는 액체투과압력(liquid entry pressure, LEP) 측정 방법을 최적화하였다. PE (polyethylene) 분리막 및 PVDF (polyvinylidene di-fluoride) 중공사 분리막의 LEP를 측정하기 위하여 20 wt%의 고농도 염수를 제조하여 원수로 사용하고 투과수의 전도도를 모니터링하였다. PE와 PVDF 중공사 분리막의 신뢰성 있는 LEP 측정을 위해서는 5 min 이상의 holing time을 두고 주입 압력을 증가시켜야 하며, 증류수 수조의 물량대비 분리막의 면적비 또한 $10m^2/m^3$ 이상으로 부여되어야 함을 확인하였다.