• 에너지공학
• /
• 제13권1호
• /
• pp.82-91
• /
• 2004

석탄 및 하수슬러지 내에 함유된 무기물질을 환경적 측면에서 안정적인 물질로 재활용하기 위해서는 회재의 형태가 아닌 슬랙의 형태로 발생시키는 것이 한 방법이다. 가스화 반응에서 생성된 석탄 슬랙과 소각ㆍ용융과정에서 생성된 하수슬러지 슬랙의 특성을 분석하여, 재활용 측면에서 살펴보았다. 급냉을 시킨 슬랙들은 잘게 쪼개진 수 mm크기로 발생되었고, 함유된 미연탄소분은 모두 0.15% 이하였으며 슬랙의 구조는 대부분 무결정형인 특징을 보여주고 있었다. 분석 결과를 보면, 석탄 슬랙과 하수슬러지 슬랙 모두 중금속 성분이 용출되는 양은 국내기준치의 10배나 엄격한 일본기준보다도 훨씬 낮아서 재활용 물질로 활용하는 데에 문제가 없음을 알 수 있었다. 슬랙 내에 함유된 중금속 농도에서는 큰 차이가 있었는데, 향후 중금속 함량규제가 도입될 경우에는 두 슬랙 원료의 혼합 활용을 통해 중금속 함량 조절도 가능할 것이다.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.70-77
• /
• 2015

This paper develops and evaluates a mechanical machining process which involves drilling on PVS material. According to the material, two treatment experiments were conducted, one involving drilling in a wet condition or using a lubricant and one involving drilling in a dry condition with no lubricant. Drilling in a dry condition showed better performance in terms of the cutting time than in the wet condition. Otherwise, the wet condition has several advantages. The lubricant influenced the burr diameter size and minimized the temperature on the surface of the work piece. During the wet condition drilling process, a smaller burr diameter size was noted as compared to the dry condition. The temperature showed a linear correlation with the drill bit size, where a least-square analysis provided an $R^2$valuewhichexceeded 0.95. The wet condition required more cutting time than the dry condition. In this condition, the water provides a lubrication effect. A thin layer between the cutting edges and the surface of the work piece is formed. The chip formation is affected by the drilling depth. The color on the tips of the chips was darker than in the initial condition. No correlation between the drilling depth and the bore roughness was noted, but the variation of the cutting speed or the RPM influenced the roughness of the bore. The optimum cutting speed ranged from 40 RPM to 45 RPM in the condition which provided the finest roughness surface.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.47-76
• /
• 1994

This study was carried out to evaluate the effect of the crack propagation characteristics and bond stress of ceramo-metal system. In order to characterize the crack propagation, the static crack propagation stored in $37^{\circ}C$ distilled water of two commerical porcelains and the dynamic crack propagation under cyclic flexure load of ceramo-metal system were examined. In order to characterize the bond stress, the shear bond test, the 3-point flexure bond test, and the finite element stress analysis of ceramo-metal system were conducted. The results obtained were as follows : 1. Bulk densities and Young's moduli of opaque porcelains increased with repeated firing. 2. Maximum fracture toughness during 4 firing cycles showed at the group of 4 firing cycles in Ceramco porcelain and 2 firing cycles in Vita porcelain. 3. Shear bond strength and flexure bond strength of Ceramco-Verabond specimen were larger than those of Ceramco-Degudent G specimen (p<0.05). 4. Interfacial stresses under three point flexure bond test were concentrated at the edges of ceramometal system. 5. When a cyclic flexure load was applied, the crack growth rate of porcelain surface of ceramometal specimens was decreased as load cycles increased.

• The Journal of Advanced Prosthodontics
• /
• 제10권5호
• /
• pp.381-387
• /
• 2018

PURPOSE. Cement-retained implant prostheses can lack proper retrievability during repair, and residual cement can cause peri-implantitis. The purpose of this in vitro study was to evaluate the influence of abutment height and convergence angle on the retrievability of cement-retained implant prostheses with lingual slots, known as retrievable cement-type slots (RCS). MATERIALS AND METHODS. We fabricated six types of titanium abutments (10 of each type) with two different heights (4 mm and 6 mm), three different convergence angles ($8^{\circ}$, $10^{\circ}$, and $12^{\circ}$), a sloped shoulder margin (0.6 mm depth), a rectangular shape ($6mm{\times}6.5mm$) with rounded edges, and a rectangular ledge ($2mm{\times}1mm$) for the RCS. One monolithic zirconia crown was fabricated for each abutment using a dental computer-aided design/computer-aided manufacturing system. The abutments and crowns were permanently cemented together with dual-curing resin cement, followed by 24 hours in demineralized water at room temperature. Using a custom-made device with a slot driver and torque gauge, we recorded the torque ($N{\cdot}cm$) required to remove the crowns. Statistical analysis was conducted using multiple regression analysis and Mann-Whitney U tests (${\alpha}=.05$). RESULTS. Removal torques significantly decreased as convergence angles increased. Multiple regression analysis showed no significant interaction between the abutment height and the convergence angle (Durbin-Watson ratio: 2.186). CONCLUSION. Within the limitations of this in vitro study, we suggest that the retrievability of cement-retained implant prostheses with RCS can be maintained by adjusting the abutment height and convergence angle, even when they are permanently cemented together.

• Mycobiology
• /
• 제29권4호
• /
• pp.218-223
• /
• 2001

A rapid radicle assay for prescreening antagonistic bacteria to Phytophthora capsic4 causal agent of Phytophthora blight of pepper was developed. Sixty-four bacterial strains with in vitro antifungal activity selected out of 1,400 strains isolated from soils of Ansung, Chunan, Koyang, and Paju, Korea in 1998 were used for development of the bioassay. Uniformly germinated pepper seeds dipped in bacterial cells for 3 hours were placed near the edges of growing mycelia of P. capsici on water agar containing 0.02% glucose. Five-week-old pepper plants(cv. Nockwang) were inoculated to compare with results of the radicle assay developed in this study. For plant inoculation, pepper seeds were sown in potting mixtures incorporated with the bacterial strains, then transplanted into steam-sterilized soils 3 weeks later. Plants were hole-inoculated with zoospores of P. capsici 2 weeks after transplanting. Disease incidence and severity were determined in radicle and plant assessments, respectively. In radicle assay, six strains, GK-B15, GK-B25, OA-B26, OA-B36, PK-B09, and VK-B14 consistently showed the significant(P=0.05) disease reduction against radicle infection by the fungus, four of which also did in plant assessments. Strains OA-B36 and GK-B15 consistently reduced the fungal infection in both the radicle assay and the plant assessment. Therefore, prescreening strains using the radicle assay developed in this study followed by plant assay could reduce time and labor, and improved the possibility of selecting antagonistic bacteria for control of Phytophthora blight of peppers.

• 식물병연구
• /
• 제15권2호
• /
• pp.88-93
• /
• 2009

고추 유묘의 신초가 말라죽고 잎에 수침상점무의 증상으로부터 병원균을 분리하여 균총의 색깔과 형태, 포자의 모양과 크기를 관찰한 결과 균총의 색깔은 처음에는 핑크색 띄나 차츰 회색으로 변하였고, 분생포자는 방추형으로 크기가 $8.1-17.0{\times}2.0-3.8{\mu}m$이며 생장최적온도 $25-27^{\circ}C$이다. 종 특이적 프라이머를 이용하여 고추 유묘에서 분리한 균을 동정한 결과 C. acutatum에 특이적인 프라이머인 CaINT에서만 496 bp의 증폭산물을 얻었다. 이들 결과를 바탕으로 유묘에서 분리한 균은 Collectotrichum acutatum으로 동정하였다. 고추 유묘에서 분리한 균주를 고추묘 생육단계별로 병원성 검정한 결과 유묘 뿐 아니라 식물체 전 생육기에 잎 탄저병 증상을 나타내었으며 또한 고추 열매에서도 강한 병원성을 나타내었다.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.113-121
• /
• 2010

Recently, as container ships become larger and faster, rudder cavitations are more frequently observed near the gap between the horn and rudder plates of the ships to cause serious damages to the rudder surface of the ship. The authors already have suggested through a series of model experiments and numerical computations that employment of an appropriate blocking device for gap flow may retard the gap cavitation. For examples, a cam device installed near the outer edges of the vertical gap or a water-injection device combined with a pair of half-round bars installed inside the gap can considerably reduce the gap cavitation. However, it is also found that effective blocking of the flow through the vertical gap results in growth of the cavitation near the horizontal gap instead. In the present study, effectiveness of the simultaneous blocking of the flow through the horizontal and vertical gaps of a horn type rudder in minimizing the damage by gap cavitation is studied. Additional blocking disks are inserted inside the horizontal gaps on the top and bottom of the pintle block and numerical computations are carried out to confirm the combined effect of the blocking devices.

• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.375-382
• /
• 2010

A layered perovskite photocatalysts, $SrBi_2Nb_2O_9$ (SBN), was synthesized by the conventional solid-state reaction method and characterized by X-ray diffraction (XRD) and UV-visble spectrophotometry. The results showed that the structure of $SrBi_2Nb_2O_9$ is orthorhombic. Diffuse reflectance spectra for calcined and attrition-milled SBN showed the main absorption edges were less 400 nm, that is ultraviolet region. SBN under micron-sized powder was deposited on the $Al_2O_3$ by room temperature powder spray in vacuum process, so called aerosol deposition (AD), and nano-grained $SrBi_2Nb_2O_9$ photocatalytic thick film was fabricated. AD-deposited SBN thick films were characterized by XRD, scanning electron microscopy (SEM) and UV-visable spectrophotometry, Moreover, it was found that several nano-sized SBN film by AD process can improve the photocatalytic activity under visable reflectance.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.332-341
• /
• 1998

석판재의 모서리 가공작업은 많은 경우 자동화가 이루어지고 있지만 제품의 형태 가 복잡해지면 여전히 수작업에 의해 연마가 이루어지고 있다. 본 논문을 성형공구의 제작 에 앞서 성형공구의 특성과 장비의 운영요소들의 변화에 따른 연마절삭성능을 파악하기 위 한 기본시험이 수행결과를 나타내는 것이다. 장비의 운영요소는 헤드의 회전속도 및 이송속 도, 가압하중, 급수율, 절삭방향과 이송방향이 포함된다. 실험결과는 연마절삭성능 즉 공구 마모 무게에 대한 판재의 절삭량으로 표시하였고, 각 운영요소들 마다의 적정 운영수준이 제시되어 있다. 또한 연마재 투입략의 변화에 대한 마모시험에서는 마모도는 연마재의 증가 에 따라 증가하지만 어느 이상의 양에서는 오히려 감소하고 있다.

• 분석과학
• /
• 제21권6호
• /
• pp.562-568
• /
• 2008

A novel two-dimensional cadmium(II)-nickel(II) bimetallic host clathrate, $[Cd{NH_2CH_2CH_2OH}_2Ni(CN)_4]{\cdot}3C_6H_5NH_2{\cdot}H_2O$, 1, has been synthesized and structurally characterized by X-ray single crystallographic method. The clathrate 1 crystallizes in the monoclinic system, space group $P2_1/c$ with a = 14.370(3), b = 7.728(1), c = 28.172(4) ${\AA}$, ${\beta}=97.58(1)^{\circ}$, V = 3101.1(9) ${\AA}^3$, Z = 4. The host framework of the clathrate 1 is built of the cyanide bridges between octahedral Cd(II) atom and square planar Ni(II) atom. The octahedral Cd atoms ligated by two 2-aminoethanol molecules and four cyanide ligands bridged with square planar Ni atoms. The Ni atoms bridges to four Cd atoms via cyanides is made up of puckered quadrangles of composition $\{CdNi(CN)_2\}_2$, all edges are shared. This cyanide bridges form an infinite two-dimensional host networks stacking along b axis. 2-Aminoethanol ligands bond to Cd atom through N atom as a monodentate ligand in the axial position and four cyanides take an equatorial plane with all in trans-configurations. The aniline guest molecules and water molecules are located in between the host layer sheets, respectively.