• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.4
• /
• pp.378-384
• /
• 1997

The ruminal solubility of copper (Cu), manganese (Mn), molybdenum (Mo), and zinc (Zn) in eight Philippine forages was studied. These forages were: 1) grasses: paragrass (Brachiaria mutica (Forsk.) Stapf), stargrass (Cynodon plectostachyum Pilger), and napiergrass (Pennisetum purpureum Schumach.); 2) creeping legumes: calopogonium or calopo (Calopogonium muconoides Desv.) and centrocema (Centrocema pubescens Benth.); 3) tree lequmes: gliricidia or kakawate (Gliricidia sepium (Jacq.) Walp.), leucaena or ipil-ipil (Leucaena leucocephala (Lam.) de Wit.), and sesbania or katuray (Sesbania grandiflora (L.) Poir). Nylon bags with samples were incubated for 0, 3, 6, 12, 24, 48 and 72h in three rumen cannulated sheep fed with timothy hay (Phleum pratense L.) at 2% body weight/d. The 0-h bags were washed with deionized water. There were species differences (p < 0.05) on the different solubilities of trace elements. At O-h incubation, the trend of solubility was Mo (54%) > Zn (43%) > Cu (38.7%) > Mn (29.5%). At 3-h incubation, all the elements except Mn had an average solubility above 50%. Combining particulate passage rate (1.9%/h) and various trace elements disappearance rates, the effective ruminal solubilization (ERS) of trace elements were computed. The ERS across species ranged from 44.6 to 89.9% for Cu, 29.9 to 84% for Mn, 66 to 95.1% for Mo, and 30.1 to 82.3% for Zn resulting to a trend of Mo > Zn > Cu > Mn.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.188-191
• /
• 2004

Appearance and disappearance of the China Coastal Waters(CCW) in the neighbouring sea of Cheju Island was very different yearly but usually appeared strongly in summer. At this time, sea level and salinity were varied in this area by the influence of the CCW. Satellite data(T/P;Topex/Poseidon) and Salinity (NFRID;National Fisheries Research and Development Institute) were used from 1993 to 2001. We compared with TG data of NOR I and TIP data in the observed station(33 31'N, 12632'E). Coefficient of correlation was 0.6~0.8 with the exception of 1993 and 1995. And variations of salinity was higher than $32.00\%_{\circ}$ in the southwestern part of Cheju Island and the southern part of the South Sea of Korea during June-October and SLA(Sea level Anomaly) was 10-11cm. Salinity of the southeastern part was higher than those of the southwestern part and SLA was 12~13cm because of the influence of Tsushima Current.

• Journal of the Korea Furniture Society
• /
• v.26 no.4
• /
• pp.428-434
• /
• 2015

In this study, we received each wood plastic composites (WPC) from three manufacturers. These WPCs were evaluated regarding their physical and mechanical properties of both before and after accelerated weathering by ultraviolet (UV) irradiation. The total time of exposure of the WPCs to UV irradiation was 1800 h. The water absorption, volumetric swelling and shrinkage of WPCs did not affected by UV irradiation. Among the mechanical properties, there was no significant differences in bending strength and screw withdrawal resistance of UV treated WPCs compared with those of reference WPCs. However, surface hardness of WPCs showed decrease under UV irradiation. Stereoscopic microscopy observation revealed deterioration of the surface layer polymer in all weathered WPCs by UV. Exposure of the WPCs to UV irradiation caused decomposition and disappearance of the polymer layer. From this result, we can estimate that damage of polymer by UV led to a decrease in the surface hardness of the WPCs. The wood flours retained original shape after accelerated weathering by UV irradiation.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.117-125
• /
• 2005

It is common to find lots of organic and inorganic precipitates inside of industrial cooling system. Analytical instruments including ICP-AES, IC, XRD, and SEM were used to investigate the effects of application of Mg on reaction among coolant, precipitates and suspended matters within chiller system. Magnesium (Mg) has a decreasing effect on total dissolved material in the coolant suggesting a significant improvement of quality of coolant. Disappearance of most organic materials in the cooling devices also suggests an inhibitive effect on the growth of organic matters.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.125-135
• /
• 2001

The research on Harmful Algal Blooms is generally in progress through field work, such as the naked eye and sampling. It was difficult to forecast exactly the course, from appearance of red tide to disappearance, with the established ways of investigation and analysis. Accordingly it is need to analyze environmental factors in time and space, the appearance of red tide and the path of its migration by more objective and scientific methods. In this study the remote sensing was used to diminish damage from the occurrence of red tide. Such as a temperature change of sea water and a change of tidal currents, the major cause for red tide. The probed data were utilized. The technique for forecast of red tide phenomenon on the south coast was researched by analyzing the cause of red tide, pollutant flowed from landand the possibility of application of the technique was showed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.4
• /
• pp.259-264
• /
• 2001

Typhoon and neap tide on Cochlodinium polykrikoides bloom and water temperature on disappearance of C. polykrikoides bloom were investigated to elucidate the outbreak mechanism of C. polykrikoides blooms at Naro and Namhae coastal area in South Sea of Korea. The first observation of C. polykrikoides blooms were observed when thermocline was disappeared by typhoon, tide, etc. The first blooms of C. polykrikoides were observed on neap tide or before one day from neap tide in 1996-1998 and 2000. However, thermocline was disappeared by typhoon in 1994 and 1999, the first blooms were observed early 12-30 day than 1996-1998 and 2000. The main reason of disappearance of C. polykrikoides blooms after typhoon on 1997-2000 seems to be other environmental change by typhoon rather than low water temperature. In the future, the first C. polykrikoides bloom will be appear around the first neap tide of latter part of August with breaking down of thermocline, but if the thermocline be collapsed by typhoon in July, the C. polykrikoides bloom will be appear at beginning of August. The outbreak of C. polykrikoides blooms will be explain as follows: The vegetative cells, which was germinated by environmental change or already exist in surface water at low level, input to the surface water, and then nutrients and trace metals which were suppled from out side of C. polykrikoides bloom area inflow to surface. The vegetative cells are growth by the nutrients and trace metals at suitable environmental conditions e.g. water temperature, salinity, and sufficient light.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.409-423
• /
• 2015

In this study the very short-term rainfall forecasting and storm water forecasting using the weather radar data were implemented in an urban stream basin. As forecasting time increasing, the very short-term rainfall forecasting results show that the correlation coefficient was decreased and the root mean square error was increased and then the forecasting model accuracy was decreased. However, as a result of the correlation coefficient up to 60-minute forecasting time is maintained 0.5 or higher was obtained. As a result of storm water forecasting in an urban area, the reduction in peak flow and outflow volume with increasing forecasting time occurs, the peak time was analyzed that relatively matched. In the application of storm water forecasting by radar rainfall forecast, the errors has occurred that we determined some of the external factors. In the future, we believed to be necessary to perform that the continuous algorithm improvement such as simulation of rapid generation and disappearance phenomenon by precipitation echo, the improvement of extreme rainfall forecasting in urban areas, and the rainfall-runoff model parameter optimizations. The results of this study, not only urban stream basin, but also we obtained the observed data, and expand the real-time flood alarm system over the ungaged basins. In addition, it is possible to take advantage of development of as multi-sensor based very short-term rainfall forecasting technology.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.5
• /
• pp.632-638
• /
• 2015

Two experiments were conducted to evaluate the nutrient composition, in vitro dry matter disappearance (IVDMD) and organic matter disappearance (IVOMD) of three kinds of distillers grains (DG); i) wet distillers grains (WDG, KRW 25/kg), ii) dried distillers grains (DDG, KRW 280/kg), iii) dried distillers grains with solubles (DDGS, KRW 270/kg) produced from tapioca 70% and rice 30%, and to evaluate dietary effects of WDG on the performance of Hanwoo steers. In Exp. 1, twelve-WDG, four-DDG and one-DDGS were collected from seven ethanol plants. Average crude protein, crude fiber, neutral detergent fiber, and acid detergent fiber of WDG, DDG, and DDGS were: 32.6%, 17.8%, 57.5%, and 30.2% for WDG, 36.7%, 13.9%, 51.4%, and 30.5% for DDG, and 31.0%, 11.9%, 40.3%, and 21.2% for DDGS (DM basis), respectively. The DDGS had a higher quantity of water-soluble fraction than WDG and DDG and showed the highest IVDMD (p<0.05) in comparison to others during the whole experimental time. The IVDMD at 0 to 12 h incubation were higher (p<0.05) in DDG than WDG, but did not show significant differences from 24 to 72 h. The same tendency was observed in IVOMD, showing that DG made from tapioca and rice (7:3) can be used as a feed ingredient for ruminants. Considering the price, WDG is a more useful feed ingredient than DDG and DDGS. In Exp. 2, 36 Hanwoo steers of 21 months ($495.1{\pm}91kg$) were randomly assigned to one of three dietary treatments for 85 days; i) Control (total mixed ration, TMR), ii) WDG 10% (TMR containing 10% of WDG, as fed basis), and iii) WDG 20% (TMR containing 20% of WDG, as fed basis). With respect to body weight and average daily gain, there were no differences between control and WDG treatments during the whole experimental period. Dry matter intake of control (9.34 kg), WDG 10% (9.21 kg) and 20% (8.86 kg) and feed conversion ratio of control (13.0), WDG 10% (13.2) and 20% (12.1) did not show differences between control and WDG treatments. Thus, the use of WDG up to 20% in TMR did not show any negative effect on the performance of Hanwoo steers.

• Ocean and Polar Research
• /
• v.41 no.4
• /
• pp.233-250
• /
• 2019

A re-assessment of the age structure of the population of the Antarctic icefish Pseudochaenichthys georgianus based on body length data covering the years 1976-2009 and including larvae and postlarvae collected in 1989 and 1990 allowed us to define age groups 0, I, and II as containing fish with respective body lengths of 6-9 cm, 15-27 cm and 27-39 cm. Age at maturity (first spawning) was found to occur in age group III at body lengths that have been falling from 50.1 cm in 1979 to 45.4 cm in 1992. Considering postlarvae together with adult fish, the v. Bertalanffy growth curve parameters were determined as L_∞ = 60.62 cm, k = 0.4, t₀ = 0.25. Although the reasons for a maturity at shorter body lengths is not fully understood a host of environmental factors like increasing water temperatures and possibly changes in currents, interspecific competition, food availability, etc. are likely to be involved. Global warming (and not primarily overfishing) is likely to have been responsible for the disappearance of larger fish in the surface waters of South Georgia since 1977, for virtually all commercial fishing stopped in the early 1990s. On the other hand, the appearance of numerous younger spawning individuals suggests that larvae do survive in the colder deeper water below 200 m. The biomass of Ps. georgianus oscillates with a 4-year periodicity in contrast to that of the coexisting icefish Chaenocephalus aceratus: the former with a lower biomass in warm years and a higher one in cold years. The biomass of the third species of icefish in the region, i.e. Champsocephalus gunnari, also oscillates, but with a longer periodicity than that involved in the biology of the other two and its biomass increases in contrast to the other two species. The result is that the biomass all three species considered together is rather stable.

• Journal of Korea Foundry Society
• /
• v.21 no.4
• /
• pp.253-259
• /
• 2001

There are many methods to produce metal foams, which can be classified into three groups according to the state of the starting metal i.e. liquid or powder or solid. Three types of defects such as cell closing, cell deformation or breakdown and cell misrun are thought to be occurred when we make the open cell aluminum foams by precision casting. Filling ability of the mold slurry between preform is related with cell closing, mold collapsibility is related with cell deformation or breakdown, mold temperature and pouring pressure are related with cell misrun. These factors can be evaluated by measuring slurry fluidity, burnout strength and permeability of the mold. Properties of the plaster mold were evaluated to find optimum mold conditions for high quality open cell aluminum foam in this study. Permeability was almost zero independent of burnout conditions, however, crack initiation was found on the surface of all specimens one or two minutes after taking out from the furnace. Crack has grown and disappeared with time. This crack may facilitate the mold filling when molten metal is poured, because of the improved mold permeability. It was considered that crack initiation and disappearance was closely related with temperature difference between the surface and inner part. Knocking-out the mold is a difficult problem due to the small cell size, because continuous mesh structure of the metal foam is not strong. It is not easy to remove molding material after pouring. We can expect that water quenching can facilitate the knocking-out the mold after solidification without damaging cell structures. Collapsed particles after water quenching became bigger with the increase in time.