• 제목/요약/키워드: Water Balance Method

검색결과 329건 처리시간 0.027초

우리나라 제사공장의 공정 관리실태에 관한 조사연구 (Studies on the Processing and Management Forms of Filatures)

  • 송기언;이인전
    • 한국잠사곤충학회지
    • /
    • 12호
    • /
    • pp.37-45
    • /
    • 1970
  • 1969년도 우리나라 제사공장의 공정관리 실태를 조사분석한 결과는 다음과 같다. 1 춘추잠기 공히 최성일을 포함한 5일간(최성일전후 각 2일)의 출하량이 전공판량의 약 80% 내외이고 최성일의 -3일까지 및 +3일이후의 출하량은 가각 10% 내외이다. 2. 생견의 운반도로상태는 92% 내외가 비포장도로이고 전공장이 구견량의 40% 내외를 40km이상되는 공판장에서 트럭으로 운반하고 있는 실정이므로 생견수송중의 격동에 의한 견질손상을 최소한으로 감소시킬 수 있는 생견의 새로운 포장방법이 청구되어야 할 것이다. 3. 전공장의 22%가 생사품위의 저하요인이 되고 있는 저온건조고만을 설치하고 있는 실정이드로 이들 공장에 대한 열풍건견기의 설치는 시급하다고 본다. 4. 원료견의 가일조제방법은 50% 내외가 정상(1.2.3.4등견), 정하(5.6등견)로 구분하고 있는바 우리나라의 견질성상으로 볼 때 정상(1.2등견), 정중(3.4 등견) 정하(5.6등견)로 구분하여 조제하는 방향으로 개선시켜야 될 것이다. 5. 선제견비율은 다조조사용이 10% 내외 자동조사용이 15% 내외로서 다조용보다 자동용이 높았으며 대 1인당 1일 선견능력은 약 80~100kg이었다. 6. 자견조건은 원료견의 해서가 불량할수록 자견시간 자견압력 및 자견온도가 높았으며 자동조사용 및 옥사조사용의 원료견은 다조조사용의 원료견보다 약자상태이었다. 7. 자동조사가 다조조사보다 1~2$^{\circ}C$의 저온에서 약 2배의 권취속도로 조사하고 있다. 8. 재조온습도는 실내가 $25^{\circ}C$, 67.2%RH 기내가 32.3$^{\circ}C$ 51.9% RH이었고 권취속도는 233m/min 대 1인당 담당창수는 7.5창이었으며 타래의 형태는 전공장이 배인이었다. 9. 제사용수의 용수원은 약 75%가 지하수이고 정수시설이 미비되어 있는 공장이 약 48%인바 이들 공장에 대한 정수시설의 완비는 시급한 과제이다. 10. 대부분의 공장이 자체검사시설로서 검위형, 무척기 Seriplane 검사시설을 보유하고 있다. 11. 진공삼투기는 전공장의 90%이상이 재조공정에서 약 20% 공장이 자견공정에서 활용하고 있다. 12. 제사공정에서 화학약제를 사용하는 공장은 약 21%에 불과하며 사용하는 약제는 대부분의 공장이 자견과정에서는 Seracol "100"을 재조과정에서는 Seracol "500"이었다. 13. 이상의 조사결과를 종합하여 볼 때 공정관리면에서는 각제사공장간에 큰 차이를 나타내고 있으므로 강습회 등을 통한 각공장간의 기술교류는 우리나라 제사업의 생산성을 제고시키는 한 요인이 될것이다.성을 제고시키는 한 요인이 될것이다.

  • PDF

토양수분함량 예측 및 계획관개 모의 모형 개발에 관한 연구(I) (A Study on the Development of a Simulation Model for Predicting Soil Moisture Content and Scheduling Irrigation)

  • 김철회;고재군
    • 한국농공학회지
    • /
    • 제19권1호
    • /
    • pp.4279-4295
    • /
    • 1977
  • Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka+Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

  • PDF

소형 4행정사이클 무과급 디이젤 기관의 성능 시뮤레이션 전산프로그램의 개발에 관한 연구 (A study on the development of simulation program for the small naturally aspirated four-stroke diesel engine)

  • 백태주;전효중
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제8권1호
    • /
    • pp.17-36
    • /
    • 1984
  • Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

  • PDF

식물 환경 조절 시스템에서의 토양 호흡 관측 챔버법의 비교 실험 (Intercomparison of Chamber Methods for Soil Respiration Measurement in a Phytotron System)

  • 채남이;김래현;황태희;서상욱;이재석;손요환;이도원;김준
    • 한국농림기상학회지
    • /
    • 제7권1호
    • /
    • pp.107-114
    • /
    • 2005
  • 토양 호흡은 주요 육상 생태계의 탄소 순환을 이해하는데 중요한 성분 중 하나이다. 토양 호흡 관측에서 쳄버 방법은 가장 일반적인 방법이다. 다양한 토양 호흡쳄버 방법에 의해 이루어지는 관측 값들을 비교하기 위해서는, 측기의 특성에 따른 오차를 파악하는 것이 필요하다. 이를 위하여 온도 조절이 가능한 식물 환경 조절 시스템에서 네 개의 폐회로 역학 쳄버와 자동 개폐 쳄버를 비교하였다. 식물 환경 조절 시스템의 내부의 이산화탄소 농도의 변동과 토양 수분의 변동으로 어느 정도의 오차가 포함된 결과이지만, 실험을 통해 토양 온도와 이산화탄소 농도의 변화에 따른 대한 네 측기들의 반응 특성과 실내 비교 실험의 계획과 방법에 대한 중요한 교훈을 얻을 수 있었다.

지구 온난화 경감을 위한 인공해빙증가 (Artificial Sea Ice Increasing to Mitigate Global Warming)

  • 변희룡;박창균
    • 한국지구과학회지
    • /
    • 제36권6호
    • /
    • pp.501-511
    • /
    • 2015
  • 본 연구에서는 북극과 남극에서 기온과 수온이 영하임에도 불구하고 얼음이 없는 광범위한 지역(인공증빙가능역)이 존재하는 것에 주목하여, 이 지역에 인공적으로 해빙을 생성하여 지구 표면의 알베도를 높이는 방식으로 지구온난화를 완화하는 방법을 제안하였다. 대략 $4.09{\times}10^6km^2$의 해빙면적이 추가되면 지구온난화 효과로 가정되는 약 $0.85Wm^{-2}$ 에너지가 상쇄된다고 계산되었다. 또한, 인공적으로 해빙을 생성하기 위한 세 가지 빙판 생성 방법(배로 물 뿌리기, 빙판생성장치 운용, 수면에 GCF부유물질 띄우기)을 제안하였다. 간단한 에너지평형모형 실험에 따르면, 3개월 (9, 10, 11월) 동안 인공증빙가능역에 해빙을 최대로 생성할 경우, 다음해에 대략 $0.11^{\circ}C$의 지구표면온도 하강이 기대되었다. 반면에 모든 계절을 통해 생성할 경우, 오히려 지구 냉각화를 초래할 위험성도 발견되었다.

밭작물(作物)의 계획관개(計劃灌漑) 모형(模型) - 토양수분(土壤水分) 변화(變化)를 중심(中心)으로 - (Irrigation Scheduling Model for Dry Crops)

  • 안병기;김태철;정상인
    • 농업과학연구
    • /
    • 제14권1호
    • /
    • pp.68-80
    • /
    • 1987
  • 콩의 생육시기별(生育時期別) 증발산량(蒸發散量)과 토양수분(土壤水分) 변화량(變化量)을 추정(推定)하기 위한 토양수분추정모형(土壤水分推定模型)을 설정(設定)하였으며 라이시미터 실험(實驗)을 통한 실측치(實測値)와 비교(比較)한 결과(結果)는 다음과 같다. 1. 라이시미터 실험(實驗)을 통(通)하여 측정(測定)한 실제증발산량(實際蒸發散量)은 405.7mm 이었으며 Pan 증발량법(蒸發量法)과 Hargreaves식(式)에 의한 잠재증발산량(潛在蒸發散量)은 각각(各各) 547.8mm, 586.8mm이었다. 작물(作物)의 생육기간중(生育期間中) 작물계수(作物係數) K는 Table 1 과 같다. 2. 라이시미터 실험을 통한 전생육기간(全生育期間)(133일(日)) 동안의 실제증발산량(實際蒸發散量)은 405.7 mm이었으며 Pan 증발훈법(蒸發暈法)과 Hargreaves식(式)에 의해 추정(推定)된 실제증발산량(實際蒸發散量)은 각각(各各) 424.7mm, 426.1mm였다. 3. 콩의 생육기간별(生育期間別)로 10cm, 30cm, 50cm 깊이에서 관측된 토양수분변화(土壤水分變化)는 10 cm (첫 20cm 토층)에서는 변화(變化)가 크게 나타났으나 30 cm와 50 cm에서는 변화(變化)가 거의 없었다. 모형으로 추정(推定)된 토양수분변화(土壤水分變化)와 관측된 토양수분변화(土壤水分變化)사이에는 아직도 큰 차이가 있으므로 뿌리의 깊이별 토양수분소비형태(土壤水分消費形態)에 대한 연구(硏究)가 요구된다.

  • PDF

EXPERIMENTAL SIMULATION OF A DIRECT VESSEL INJECTION LINE BREAK OF THE APR1400 WITH THE ATLAS

  • Choi, Ki-Yong;Park, Hyun-Sik;Cho, Seok;Kang, Kyoung-Ho;Choi, Nan-Hyun;Kim, Dae-Hun;Park, Choon-Kyung;Kim, Yeon-Sik;Baek, Won-Pil
    • Nuclear Engineering and Technology
    • /
    • 제41권5호
    • /
    • pp.655-676
    • /
    • 2009
  • The first-ever integral effect test for simulating a guillotine break of a DVI (Direct Vessel Injection) line of the APR1400 was carried out with the ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation) from the same prototypic pressure and temperature conditions as those of the APR1400. The major thermal hydraulic behaviors during a DVI line break accident were identified and investigated experimentally. A method for estimating the break flow based on a balance between the change in RCS inventory and the injection flow is proposed to overcome a direct break low measurement deficiency. A post-test calculation was performed with a best-estimate safety analysis code MARS 3.1 to examine its prediction capability and to identify any code deficiencies for the thermal hydraulic phenomena occurring during the DVI line break accidents. On the whole, the prediction of the MARS code shows a good agreement with the measured data. However, the code predicted a higher core level than did the data just before a loop seal clearing occurs, leading to no increase in the peak cladding temperature. The code also produced a more rapid decrease in the downcomer water level than was predicted by the data. These observable disagreements are thought to be caused by uncertainties in predicting countercurrent flow or condensation phenomena in a downcomer region. The present integral effect test data will be used to support the present conservative safety analysis methodology and to develop a new best-estimate safety analysis methodology for DVI line break accidents of the APR1400.

음악치료(音樂治療)의 원리(原理)와 체질의학적(體質醫學的) 접근을 위한 검토 (A Review on Principles and Access Methods to Sasang Constitutional Medicine of Music Therapy)

  • 이지영;박성식
    • 사상체질의학회지
    • /
    • 제18권1호
    • /
    • pp.30-40
    • /
    • 2006
  • 1. Objectives The present study purposed to examine the contents and the principles of music therapy according to Oriental medicine theories in order to prove that music therapy is not a new research area but its principle is found in the long tradition of Oriental medicine. 2. Methods We investigate the possibility of music therapy based on Oriental medicine theories and examine the meanings of music therapy from the viewpoint of Oriental medicine. 3. Conclusions and discussions (1) The principles of music therapy are the principle of homogeneity, catharsis and balance. (2) When one’s mind changes, there are naturally occurred sounds, which are called Oseong (五聲: the oriental five voices exhalation, laughing, singing, wailing and groaning), and the notes defined by arranging the Oseong according to the principle of Ohaeng (五行: the oriental five phases wood, fire, earth, metal, water) are Oheum (五音: the oriental five musical notes Gakeum, Chieum, Gungeum, Sangeum and Wooeum.). If Eum (musical notes) is classified into Ohaeng, it can be divided into Gakeum, Chieum, Gungeum, Sangeum and Wooeum. (3) Change of Sinji (神志: consciousness) induces change of Gigi (氣機: function of Gi), which can change the character of voices. Oseong controls the functions of Ojang (五臟: the oriental five viscera) by ruling one’s Jeongji (情志: emotion). It can reduce the damage of the viscera caused by excessive vent of emotion resulted from unconscious expression of Oseong - Hoseong (呼聲: exhalation), Soseong (笑聲: laughing), Gaseong (歌聲: singing), Gokseong (哭聲: wailing) and Sinseong (呻聲: groaning). (4) Yijeongseungjeong (以情勝情: Control emotion with emotion) therapies, which suppresses an emotion by stimulating another, include Noseungsabeop (怒勝思法: Control anxiety with anger), Heeseungbibeop (喜勝悲法: Control sorrow with joyfulness), (思勝恐法: Control fear with anxiety), Biseungnobeop (悲勝愁法: Control anger with sorrow) and Gongseungheebeop (恐勝喜法: Control joyfulness with fear). (5) Seongeum (聲音: voices and musical notes) can be applied to a stimulation method that not only harmonizes the rhythm of living organs but also controls the occurrence of diseases caused by mutual Pyeonseongpyeonsoi (偏盛偏衰: relative preponderance and weakness) through direct induction of the strength and weakness of Gi function of the oriental five viscera in a human body according to the individual character. Sounds preferred by the patient, the material of an instrument selected by the patient, the character of rhythm and music expressed by the patient and the sound or voice uttered frequently by the patient can be considered in diagnosis and treatments for the patient’s body and mind.

  • PDF

분포형 광역 수문모델 개발 및 한강유역 미래 기후변화 수문영향평가 (Development of a Meso-Scale Distributed Continuous Hydrologic Model and Application for Climate Change Impact Assessment to Han River Basin)

  • 김성준;박근애;이용관;안소라
    • 한국지리정보학회지
    • /
    • 제17권3호
    • /
    • pp.160-174
    • /
    • 2014
  • 본 연구의 목적은 광역의 일단위 수문순환을 모의할 수 있는 격자기반의 분포형 모델을 구축한 후, 이를 미래 기후변화에 따른 광역적 수문영향을 평가하는데 있다. 격자별로 지표 유출층, 지표하 불포화 및 포화 토양층의 3단으로 구성하여 일별 물수지를 계산하며, 증발산량은 Penman-Monteith방법을 사용하였고, 지표 및 지표하유출은 지체계수(lag coefficient)와 감수곡선 계수(recession curve slope)를 적용하였다. 모델의 검보정을 위하여 한강유역의 충주댐과 소양강댐을 대상으로 9개년(2001-2009)의 댐유입량 자료를 이용하여 모델의 6개 주요매개변수를 보정하였으며, Nash-Sutcliffe 모델효율 (NSE)은 각각 0.57, 0.71의 값을 보였으며, 결정계수($R^2$)는 각각 0.65, 0.72의 값을 보였다. 5개의 IPCC SRES A1B 기후변화 시나리오자료(CSIRO MK3, GFDL CM2_1, CONS ECHO-G, MRI CGCM2_3_2, UKMO HADGEMI)를 적용한 결과, 미래 유출량의 변화는 강수량과 비슷한 경향을 보이면서 전체적으로 7.0%~27.1% 증가하였고, 증발산량도 미래 기온의 증가경향으로 일부 경우를 제외하고 증가하는 경향을 나타내었으며, 이들의 공간적 변화를 제시하였다.

Effect of By-Product Gypsum Fertilizer on Methane Gas Emissions and Rice Productivity in Paddy Field

  • Park, Jun-Hong;Sonn, Yeon-Kyu;Kong, Myung-Suk;Zhang, Yong-Seon;Park, Sang-Jo;Won, Jong-Gun;Lee, Suk-Hee;Seo, Dong-Hwan;Park, So-Deuk;Kim, Jang-Eok
    • 한국토양비료학회지
    • /
    • 제49권1호
    • /
    • pp.30-35
    • /
    • 2016
  • Rice cultivation in paddy field affects the global balance of methane ($CH_4$) as a key greenhouse gas. To evaluate a potential use of by-product gypsum fertilizer (BGF) in reducing $CH_4$ emission from paddy soil, $CH_4$ fluxes from a paddy soil applied with BGF different levels (0, 2, 4 and $8Mg\;ha^{-1}$) were investigated by closed-chamber method during rice cultivation period. $CH_4$ flux significantly decreased (p<0.05) with increasing level of BGF application. $8Mg\;ha^{-1}$ of BGF addition in soil reduced $CH_4$ flux by 60.6% compared to control. Decreased soil redox potential (Eh) resulted in increasing $CH_4$ emission through a $CO_2$ reduction reaction. The concentrations of dissolved calcium (Ca) and sulfate ion (${SO_4}^{2-}$) in soil pore water were significantly increased as the application rate of BGF increased and showed negatively correlations with $CH_4$ flux. Decreased $CH_4$ flux with BGF application implied that ${SO_4}^{2-}$ ion led to decreases in electron availability for methanogen and precipitation reaction of Ca ion with inorganic carbon including carbonate and bicarbonate as a source of $CH_4$ formation under anoxic condition. BGF application also increased rice grain yield by 16% at $8Mg\;ha^{-1}$ of BGF addition. Therefore, our results suggest that BGF application can be a good soil management practice to reduce $CH_4$ emission from paddy soil and to increase rice yield.