• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.4 s.107
• /
• pp.60-66
• /
• 2004

In this paper, oyster shell, diatomaceous earth, and active carbon were used as filter media for treating wastewater produced in paper mills. After filtering, the changes of COD and turbidity were investigated. As the results of estimating the efficiency of wasterwater treatment, porous oyster shell having higher specific surface area in powder was more effective than the others in removal of contaminants in waterwater, especially turbidity.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.28-33
• /
• 2020

Oil-related products have provided many benefits to humanity, but are significant contributors to environmental pollution. As per the International Maritime Organization (IMO) requirements, in the future, all ships must be equipped with filtering equipment and 5ppm bilge alarms that can help remove or reduce oil products during wastewater treatment. In this study, a UV fluorescence measurement system that can detect the oil components in wastewater containing both water and oil was developed. When an excitation wavelength of 254nm was used to irradiate the wastewater, the amount of UV at a divergent wavelength of 360nm was measured to measure the contamination. Based on the measurement, it was concluded that this system is suitable for use as the 5ppm bilge alarm proposed by IMO.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.1-6
• /
• 1997

This research was conducted in the laboratory to investigate an alternative of Copper(Cu) removal from an heavymetal wastewater using the electrochemical precipitation(ECP) process. The ECP unit consisted of an electrolytic cell made of Titanium plate and Steel plate representing anode and cathode. The DC power source applied to the ECP unit had electrical potential(E) of 50$\pm$ 1V, respectively. The synthetic wastewater used in the experiments contained Cu in the 10 mg/l concentration and the electrode separation were 2, 3, 4 cm and the initial pH were 3, 6, 9, 12, and electrolytic concentration were 0.005, 0.0125, 0.025, 0.0375 mole, and the real heavymetal wastewater used in the experiments. From the experiment for removal efficiency according to pH variation, the low pH area doesn't give the coagulation effect by Ti(OH)$_4$ because process interfere with the coagulation and oxidation reaction, therefore the optimum pH was 4-7. The removal rate was 97.75% after the lapse of 30 minutes when copper concentration and electrolytic concentration were respectively 10 mg/l and 0.025 mole. The removal rate was 96.41% after the lapse of 30minutes when the real heavymetal wastewater used. The optimum consumption of power showed 27KWh/m$^3$ when copper concentration, electrolyte concentration and cell potential were respectively 10 mg/l, 0.025 mole and 50$\pm$ 1 Volt.

• Journal of Environmental Health Sciences
• /
• v.21 no.4
• /
• pp.10-16
• /
• 1995

Dyes are released into the environment from industrial wasterwater. They are considered to be a pollution problem because of the wide spread into environment with a variety of colors. In order to biological treatment of industrial dyes waste water, biodegradation of reactive dyes such as Rifacion Red H-3EB, Rifazol Blue BT, Rifacion Yellow P-4G and Rifacion Brown RT were carried out decolorized by Aspergillus sojae B-10. Aspergillus sojae B-10 showed the almost completely biodegradation ability when it was cultivated in a 2.0% glucose, 0.06% sodium nitrite, 0.1% $KH_2PO_4$, 0.5% $MgSO_4\cdot 7H_2O$ containing each reactive dyes (500 ppm) under the optimal conditions of 32$\circ$C and pH 5. The mycelium of Aspergillus sojae B-10 was produced extracellular enzyme which has concerned responsible for dyes biodegradation. Under optimal conditions, reactive dyes started being decolorized within 24 hr and its was almost decolorized c ompletely after 5 days incubation. Rifazol blue RT was not completely decolorized until 5 days of cultivation. Rafacion Red BT, Rifasol blue BT and Rifacion yellow P-4G were completely decolorized after 5 days cultivation.

• Korean Journal of Microbiology
• /
• v.35 no.3
• /
• pp.237-241
• /
• 1999

Phenolic resin wastewater contained 41,000 mglI phenol, 2,800 mg/l fonualdehyde and various chlorinated phenolic compounds. Candida tropicalis PW-51 isolated [rom the natural enVlfooment was able to degrade 1,000 mg/l phenol in the presence of 100 mglI formaldehyde, but it took much time to degrade phenol with the increase of formaldehyde in phenolic resin wastewater. %en the phenolic resin wastewater was diluted to 1/40, the initial concentration of phenolic compounds (phenols) was 882 mglI and degraded to 81 mglI by C tfVpicalis PW-51 in batch culture. In a continuous biological treatment, the phenolic resin wastewater was diluted to 40 (745 mglI), 20 (1,356 mglI), or 10 (2,875 mglI) times. The removal efficiency of phenols in 1/40- and lI20-diluted phenolic resin wastewater was about 92%, but the phenols in 1!1O-diluted wastewater were not degraded. The remained phenols in wastewater were absorbed by a mixture of activated carbon and rice bran (1:1, v:v) in the process of absorption which was connected to the biological treatment. The total removal efficiency of phenols in 1!40~ and l/20-diluted phenolic resin wastewater was 99.9%.

• Journal of Wetlands Research
• /
• v.16 no.2
• /
• pp.205-212
• /
• 2014

Ultrasound technology can be applied in various fields including environmental, energy, and material engineering processes. In this study the effect of liquid height/volume on calorimetric energy and sonochemical oxidation was investigated as one of the basic steps for the design of water/wastereater treatment sonoreactors. The liquid height was increased from 0 to $4{\lambda}$ by $1/4{\lambda}$ and it was found that both calorimetric energy and sonochemical oxidation were significantly increased at relatively high liquid height/volume where the power density was relatively low. The sonochemiluminescence (SCL) images for the visualization of the activity of cavitation also showed that larger and more stable active zone was formed with high SCL intensity at high liquid height/volume. Therefore, it was revealed that sonoreactors for water/wasterwater treatment could be significantly effective in terms of removal efficiency and energy consumption.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.888-893
• /
• 2016

In this study, the solution plasma process was utilized with the aim of degrading synthetic dyes in water at atmospheric pressure. The experiments were conducted in a batch-type reactor consisting of a symmetric wire-wire electrode configuration with rhodamine B (RhB) as the target synthetic dye. The effects of the plasma treatment time and initial dye concentration on the RhB degradation were investigated by monitoring the change in absorbance of RhB solutions. The RhB solutions turned lighter in color and finally colorless with prolonged plasma treatment time, indicating the destruction of dye molecules. The RhB solutions were found to have degraded, following the first-order kinetic process. However, for high initial RhB concentrations, another kinetic process or factor seems to play a dominant role at the initial degradation stage. The fitted first-order rate constant decreased as the initial concentration increased. This result suggests that the degradation behavior and kinetic process of the RhB solution strongly depends on its initial concentration. The RhB degradation is considered to be due to a combination of factors, including the formation of chemically oxidative species, as well as the emission of intense UV radiation and high-energy electrons from the plasma. We believe that the solution plasma process may prove to be an effective and environment-friendly method for the degradation or remediation of synthetic dye in wastewater.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.307-311
• /
• 2019

The ejector type microbubble generator, which is the method to supply air to water by using cavitation in the nozzle, does not require any air supplier so it is an effective and economical. Also, the distribution of the size of bubbles is diverse. Especially, the size of bubbles is smaller than the bubbles from a conventional air diffuser and bigger than the bubbles from a pressurized dissolution type microbubble generator so it could be applied to the aeration tank for wastewater treatment. However, the performance of the ejector type microbubble generator was affected by hydraulic pressure and MLSS(Mixed Liquor Suspended Solid) concentration so many factors should be considered to apply the generator to aeration tank. Therefore, this study was performed to verify effects of hydraulic pressure and MLSS concentration on oxygen transfer of the ejector type microbubble generator. In the tests, the quantity of sucked air in the nozzle, dissolved oxygen(DO) concentration, oxygen uptake rate(OUR), oxygen transfer coefficient were measured and calculated by using experimental results. In case of the MLSS, the experiments were performed in the condition of MLSS concentration of 0, 2,000, 4,000, 8,000 mg/L. The hydraulic pressure was considered up to $2.0mH_2O$. In the results of experiments, oxygen transfer coefficient was decreased with the increase of MLSS concentration and hydraulic pressure due to the increased viscosity and density of wastewater and decreased air flow rate. Also, by using statistical analysis, when the ejector type microbubble generator was used to supply air to wasterwater, the model equation of DO concentration was suggested to predict DO concentration in wastewater.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.159-167
• /
• 2000

In recent years, combined and separated sewer overflows (CSOs, SSOs) have been recognized as a significant pollution problem. To solve this problem a series of experiments were performed in a small scale Rapid Floc Settler (RFS) device to determine its ability in removing micro particles and dissolved materials from polluted waters. The RFS device is a compact physico-chemical wasterwater treatment system. Polyacrylamide (PAM) is used as a coagulant for treating stormwater in the RFS. The results of Jar test showed that PAM could be an excellent coagulant as compared with aluminum sulfate. and ferric chloride. In several experimental conditions, the influence of different variation parameters was tested to measure the efficiency of the RFS. Tests have been carried out with typical CSOs concentrations (50~1.000mg SS/L). The treatment efficiency with regard to SS and COD, which can be obtained at an overflow rate of $130m^3/m^2/day$, are 90% and 80%, respectively. Comparing other sedimentation technologies with RFS, the overflows rate of RFS is ten times faster. The distribution of particle size and number were analyzed. The RFS is suitable for the treatment of CSOs and also the removal of settleable and dissolved materials in urban stormwater runoff.

• Journal of Sericultural and Entomological Science
• /
• v.46 no.2
• /
• pp.72-76
• /
• 2004

We have studied the effect of silk proteins to the cell proliferation of human skin fibroblast cells (CCD-986sk) after injury. Silk proteins were extracted treatment with enzyme or NaOH solution from raw silk and culled-cocoon shell of Bombyx mori, Antheraea yamamai and A. pernyi. The cell proliferation after in vitro injury are increased in treatment by Bombyx mori (BM-1,2), Antheraea yamami (AY-1,2) and A. pernyi (AP-1,2). The silk protein fractions-treated cells exhibited proliferation in a dose dependent between $0.1\;{\mu}g/ml$ and $10\;{\mu}g/ml$. But, the macrophage, RAW 264. 7 cell viability was unaffected by the silk protein fractions by MTT assay. The molecular weights of the silk protein fractions were from 300-600 to 900-1500. These results results that the silk protein fractions may function through skin fibroblast proliferation.