• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• The International Journal of Costume Culture
• /
• 제6권1호
• /
• pp.11-18
• /
• 2003

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value-added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystallization method in a temperature range within the highest and lowest daily temperatures in summer in the valley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in the dyeing of levelling dyes. In nylon fabrics, the salt samples had little color difference in the dyeing with C.I. Acid Yellow 23 and C.I. Acid Blue 158. All salt samples' gray scale was 5 grade. In wool fabrics, the salt samples had little color difference in dyeing with C.I. Acid Yellow 23 and C.I. Arid Blue 158. All salt samples' gray scale was 5 grade. Generally, the dyeing of levelling dyes using recovered salts from farm drainage had little color difference than the dyeing of levelling dyes using commercial sodium sulfate.

• The International Journal of Costume Culture
• /
• 제4권1호
• /
• pp.18-24
• /
• 2001

Agricultural drainage salt generated during irrigation of crops in San Joaquin Valley, California, exceeds 600,000 tons annually and cumulates in the field in a rapid rate. As a result, the waste is taking out more farmlands for salt storage and disposal, imposing serious concerns to environment and local agricultural industry. In searching for a potential solution to reduce or eliminate the waste, this research explored feasibility of producing a value -added product, sodium sulfate, from the waste and utilizing the product in textile dyeing. The results indicated that sodium sulfate could be produced from the salt and could be purified by a recrystalization method in a temperature range within the highest and lowest daily temperatures in summer in the alley. The recovered sodium sulfate samples, with purities ranging from 67% to 99.91, were compared with commercially available sodium sulfate in direct dyeing of cotton fabrics. The salt samples recovered from Mendata, California (〉98.8% sodium sulfate) cause little color difference in the dyeing with selected direct dyes, and the purified salt (Ⅲ) (99.91% sodium sulfate) is more applicable for direct dyeing of cotton fabrics if it has no other toxic effects. The recovered sodium sulfate from certain areas in the valley could not be employed in direct dyeing due to the high level of impurities in it.

• 패션비즈니스
• /
• 제20권2호
• /
• pp.124-133
• /
• 2016

Currently the fashion industry is developing to create a novel culture due to the very sensitive and knowledge-oriented advancement of the IT industry. With fast turnover of information, consumers have come to have a more diverse desire for purchasing. Cubical expression techniques, which empathizes formativeness, can be a creative expression method adjusting into the trend of this era. Along with functional aspects of consumers, even in a textile manufacturing sector, new materials are required to meet sensitive and emotional aspects. Consumers' desire for new and creative designs and the development and adoption of new materials are essential to meet their emotions. The IT industry and fashion industry are forced to combine and a 3D apparel CAD system has been developed, enabling virtual clothing to be represented within a computer virtual space. All processes such as design, pattern creation, sewing and simulation are possible in 3D level. Digital clothing can shorten the production process time and is very effective in that it can reduce clothing waste generated during the sample production. This paper reviewed the works of Dutch designer, Iris van Herpen, who has developed formative designs. She tries to build, construct, and sculpt employing diversified materials other than soft textile materials, as shown in her series of fashion shows. The materials include films, 3D printed polymers, stiff and sheer organza, and artificial leather textiles. A few characteristics of her works have been selected in order to prepare patterns exhibiting the traits. The paper further focused on the physical features of the textile materials used to express similar techniques and its various forms were reviewed.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.247-258
• /
• 2008

This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. We also develop high performance GT composites with GM by using PVA GT, which is capable of improving the frictional properties and thus enhances long-term performance of GT composites. Experimental study reveals that the friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In addition, the geo-composites bonded with geo-grid by a chemical process were investigated experimentally in terms of strain evaluation and creep response values. Geo-grid plays an important role as a reinforcing material. Three kinds of geo-grid were prepared as strong yarn polyester and they were woven type, non-woven type, and wrap knitted type. The sample geo-grids were then coated with PVC. The rib tensile strength tests were conducted to evaluate geo-grid products in terms of tensile strength with regard to single rib. The test was performed according to GRI-GGI. It was concluded again from the experiments that the tensile and creep strains of the geo-grid showed such stable values that the geo-grid prepared in this study could protect geo-textile partially in practical structures.

• 한국의류산업학회지
• /
• 제24권5호
• /
• pp.505-518
• /
• 2022

3D printing technology, also known as additive manufacturing(AM), has not been actively used in the clothing industry despite its potential for economic, environmental, and labor efficiency. Therefore, this study aims to propose a new 3D printing method for the clothing industry, which will be more readily accessible. This roll-type printing method can print wide-sized patterns at once using a 3D modeling program and a FDM 3D printer and help overcome the limitations imposed by the size of the printer. Then, to demonstrate the practical application cases of this printing method, bags of three designs were developed. Prior to product development, a thickness test was performed for stable printing using TPU(Thermoplastic Poly Urethane) filament, and a thickness of 0.45 mm was found to be most suitable for it. Next, the time efficiency test showed that the roll-type printing method takes less time compared to the general printing method in printing wide-sized patterns. Based on these tests, three bags, , and , were developed to confirm the suitability of the roll-type printing method for product development. The advantages of 3D roll-type printing can lie in overcoming of the spatial limitation, and the environmental sustainability as it can reduce waste from the production process. This study is significant in that it presents a new 3D printing method to improve the space limitations and time inefficiency of 3D printers.

• 한국의류산업학회지
• /
• 제20권2호
• /
• pp.177-190
• /
• 2018

Fashion industry constantly produces and consumes, which leads to huge waste piles of perfectly usable textiles in landfills, as well as other negative effects of an exploitative and excessively rapid fashion process. Pollution created by making and dyeing clothes has pitted fashion industry and environmentalists against each other. In this context, upcycling is seen as an optimal way to solve the growing problem of waste in fashion industry. The first purpose of the study was to analyze the relationships between upcycling fashion products' perceived value, pro-environmental beliefs, attitudes, electronic word of mouth (eWOM) intention, and purchase intention. The second purpose is to verify the difference of perceived consumption value among the consumers' awareness level and purchase experience. A total of 258 valid responses obtained from a group of 20-30-year-old participants were collected through an online survey. SPSS 23.0 and Amos 18.0 programs were used for data analysis. The results of the present study suggest that there are significant effects of upcycling fashion products' perceived value on pro-environmental belief; furthermore, pro-environmental belief was found to positively influence attitude, eWOM intention, and purchase intention. In addition, there are differences of perceived consumption value among the consumers' awareness level and purchase experience. Taken together, the results of this study provide researchers and practitioners with a deeper understanding of consumers' values, beliefs, attitudes, and behavioral intentions towards upcycling fashion products.

• 유기물자원화
• /
• 제21권1호
• /
• pp.76-84
• /
• 2013

본 연구에서는 RDF와 목재펠릿 그리고 폐목재, 폐섬유, 폐비닐 각각 폐기물로 반응속도를 분석하기 위해 열중량 감량 분석, 비등온 실험, 삼성분, 화학적 조성 분석, 발열량, 활성화 에너지(E) 기울기를 실험하고 값을 구하였다.고형연료의 각각의 삼성분을 비교하였을 때 RDF가 목재펠릿 보다 수분함량이 적게 나왔으며 발열량을 통해 각각의 폐기물 고형연료에서 연소반응 속도을 비교하여 보면 폐비닐의 연소반응이 제일 크게 나타났다. RDF와 목재펠릿을 비교해보면 회분의 차이는 목재펠릿이 좋다는 것을 알 수 있지만 활성화에너지로 비교하게 되면 RDF의 효율이 다른 4가지의 연료보다 좋다는 것을 알 수 있다. RDF는 승온 속도에 따라 차이가 있지만, $320{\sim}720^{\circ}C$ 사이에서 반응이 일어나는 것을 확인 할 수 있다.

• 한국의류산업학회지
• /
• 제8권4호
• /
• pp.458-464
• /
• 2006

The adsorption ability of heavy metal ions from the aqueous solution by chitosan, which it is well known natural biopolymer, has been investigated. The fundamental study in this research is focusing on the physicochemical adsorption utilizing the chitosan as a organic chelating adsorbent, adsorb especially heavy metal ions from the waste liquid solution. The adsorption ability of the chitosan between metal ions, having different characteristics with Mw of 188,600, 297,200, and 504,200 g/mol and degree of deacetylation (DD) of 86.92% and 100% were investigated targeting on the $Ni^{2+}$, $Co^{2+}$, $Zn^{2+}$, and $Pb^{2+}$ ions, respectively. The uptake of heavy metal ions with chitosan was performed by atomic absorption flame emission spectrophotometer (AAS) as conducted residual metal ions. It was found that chitosan has an strong adsorption capacity for some metals under certain conditions. Chitosan, which have 100% degree of deacetylation showed high adsorption recovery ratio and have an affinity for all kinds of heavy metals. In contrast, the molecular weight of chitosan was not completely affected on metal ion adsorption.

• 한국의류산업학회지
• /
• 제26권3호
• /
• pp.273-278
• /
• 2024

Consumer preferences for food are influenced by personal values and personalities. Social, economic, and cultural developments in modern society have influenced consumer lifestyles and brought about multiple changes in consumption patterns. In the beauty market, consumers are now more interested in specialized offerings, and an increasing number of people are opting for customized products in a market structure where mass production has led to mass consumption. Hair products are now manufactured as functional cosmetics designed to maintain and improve scalp health and hair growth by removing waste from the scalp and adding fragrance for cleanliness, breaking away from the concept of general cosmetics. Many studies have focused on personalized products in the cosmetics industry. This study aimed to accurately determine scalp types and further diagnose individual scalp conditions using a scalp diagnostic device. Based on the diagnoses, it recommended and provided personalized shampoos in order to understand how these shampoos improved scalp health. By objectively analyzing and comparing scalp conditions before and after using customized shampoos, the study demonstrated a significant effect on scalp health. The results of this study confirmed the perception and effectiveness of personalized shampoos.