• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.76-88
• /
• 2012

In this study, the treatment flow of the recyclables(paper, plastic, metal, etc.) collected and separated from MSW was investigated throughout entire phase from separation and collection to final disposal. Based on the site survey, most recyclables came into six material recovery facilities were comparatively managed well. However, some of recyclables showed irrelatively transportation flow. Because the main income source of the recyclables transportation companies is profit margin between treatment and transportation cost based on economics only therefore, it occurs an unnecessary route and long distance transportation while going to final destination. This unreasonable system should be a serious problem relating establishment of the resource recycling system. As a result of this study, in order to establish the reasonably resource recycling system, recycling center including material recovery facility has to manage the recyclables generated in close range preferentially. Also integrated its treatment system over a wide area will need to be considered as a basic step for the reasonable reasonably resource recycling system.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05b
• /
• pp.135-138
• /
• 2001

• Resources Recycling
• /
• v.20 no.3
• /
• pp.12-27
• /
• 2011

DOWA group has been working on metal recycling applying the smelting and refining process of KOSAKA Smelter. DOWA has developed it's metal recycling technologies through the treatment of black ore(complex sulfide ores) that contain many kinds of non-ferrous metals. In addition to these special technologies, DOWA has strengthened its hydrometallurgical process of precious metals and ability to deal with low-grade materials such as used electrical appliances or vehicles. On the other hand, JX Nippon Mining & Metals Corporation(JX-NMMC) carries out its metal recycling and industrial waste treatment businesses employing advanced separation, extraction and refining technologies developed through its extensive experience in the smelting of non-ferrous metals. JX-NMMC collects approximately 100,000t/y of copper and precious metal scraps from waste sources such as electronic parts, mobile phones, catalytic converters, print circuit boards and gold plated parts. These items are recycled through the smelting and refining operations of Saganoseki smelter and Hitachi Metal-recycling complex(HMC). In this like, metal recycling industries combined with environmental business service in Japan have been developed through excellent technologies for mineral processing and non-ferrous smelting. Also, both group, Dowa and JX-NMMC, were contributed to establish Japan's recycling-oriented society as the typical leading company of non-ferrous smelting. Now. it is an important issue to set up the collection system for e-waste.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.693-698
• /
• 2001

This paper establishes a coding method system including the liberation and size distribution of recycling materials in the shredder operation. Every particle in the shredded product becomes a code number using the liberation model and size distribution equation transforming of weight percentage into particles number percentage. One set of database can be obtained after all particles have been coded. This database is suitable for the size reduction operation in the process simulation of waste recycling. Coupling with the developed air classification, sizing and separating operations, the whole process simulation will be completely established for diversified application. A typical simulation for the rolling cutting shredder product of waste TV had been demonstrated under this coding system. The breakage size distribution of Gaudin and Schumann equation were selected for the shredding operation simulation. The Gaudin's liberation model was suitable fur the liberation simulation. Both of these equations were transformed weight percentage into particles distribution for the necessary of particle coding method. A better recycling operation for this shredded solid waste can be concluded from the comparison of simulation results with their sorted grade, recovery or economic of materials in different processes.

• Resources Recycling
• /
• v.15 no.1 s.69
• /
• pp.28-36
• /
• 2006

The development of material separation technique for waste plastic recycling are the necessary situation restricted by law the reclamation and incineration of waste plastic after 2004, with enforcement of EPR (Extended Producer Responsibility) system. As the this study is the research on the development of electrostatic separation techniques for recycling of life circles waste plastic by development of charging material and charger, the separation efficiency can be improved. Therefore, we developed the charger and electrostatic separator to increase charging efficiency and material separation per object plastics, rising these equipments, we removed PVC up to $99\%$ from two kinds of mixed plastics. And in case of restricting PVC content such as PET, we developed the separation technique that can remove PVC up to $99.99\%$ from PET with PET recovery about $80\%$. Also, as we separated over $98\%$ for three kinds of mixed plastics, and then established material separation technique to increase recycling of plastic.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.23-33
• /
• 2005

The development of material separation technique for waste plastic recycling are the necessary situation according to restrict by law the reclamation and incineration of waste plastic after 2004 year, pith enforcement of EPR (Extended Producer Responsibility) system. As the this study is the research on the development of electrostatic separation techniques for recycling of life circles waste plastic, it can improve separation efficiency according to development of charging material and charger. Therefore, we developed the charger and electrostatic separator to increase charging efficiency and material separation per object plastics, using these equipments, we removed PVC up to 99% from two kinds of mixed plastics. And in case of restricting PVC content such as PET, we developed the separation technique that can remove PVC up to 99.99% from PET with PET recovery about 80%. Also, as we separated over 98% for three kinds of mixed plastics, and then established material separation technique to increase recycling of plastic.

• Resources Recycling
• /
• v.28 no.2
• /
• pp.14-22
• /
• 2019

Development of technology makes LED an economical option because of lower energy consumption and better environmental impact. Because higher consumer demand the LED market is expanding rapidly due to its environment-friendly advantages. Expansion of LED application, development of various fusion technologies, the emergence of new markets, and the large-scale expansion of markets would lead to a large volume of e-waste generation with valorization potential. Currently, most of the generated waste being that landfilled and incinerated due to the absence of technology and management system. In this paper, we review the current status of LED waste recycling and analyzes the available recycling technologies.

• Journal of Korea Multimedia Society
• /
• v.24 no.12
• /
• pp.1653-1662
• /
• 2021

In this paper, we propose a small waste appliance collection system that can be used for efficient waste appliance collection, and implement an unmanned automatic small waste appliance collector system. First, we collected cases related to the collection of waste home appliances, compared and analyzed methods, and arranged the characteristics. We analyzed at the requirements for the collection and management system of waste appliances by dividing it into the aspect of the discharger and the recycling business company. The collection system consists of a client-server structure, which is a collector system and a collection management server. The unmanned automatic collector system is divided into a control unit and a machine/mechanical unit. We identified the functions that the collector system must perform and the hardware required to perform these functions. Based on this, the collector system was implemented as an embedded system. The hardware and software used in the implementation are described and the implementation results are described. The collection system developed in this paper will contribute to the development of urban mining industry by enabling the efficient collection of waste appliances.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1250-1252
• /
• 2007

Recently, a large amount of waste has been occurred from electric motor units (EMUs) due to the excess of their duration or the exchange of interior. In Korea, most of waste has been treated by incineration or landfill because the special treatment system of disused EMUs has not been existed until now. The objective of this study is to investigate the international railroad cases for the efficient treatment of disused EMUs. Japanese railroad makes an effort to enhance the recycling efficiency of rolling stocks such as the use of recycling materials or the development of recycling technology. Also, Europe has decided to treat the disused rolling stocks considering the inspection of their conditions and the increase of management cost. Therefore, in the future, it will be necessary to improve the domestic regulations related to the duration of rolling stocks and to develop the recycling technology of interior preferentially.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.597-601
• /
• 2001

Waste plastics amount is more than 3.5 million tons and 30% of industrial waste in 1998, Korea but recycling rate of industrial waste plastics is quite low because the material separation technology from the mixed waste plastic powders is not commercially available so far. This study covers the triboelectrostatic separation of polyvinylchloride (PVC) materials collection chambers and controllers. PVC and PET powders can be imparted negative and positive surface charges, respectively, due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. The extract content and yield of PVC separation from the mixed PVC and PET plastic powders are 90.0% and 98.2%, respectively. The electrostatic separation system using the fluidized bed tribocharger shows the potential to be an effective method for removing PVC materials from other mixed plastics.