• Journal of Environmental Health Sciences
• /
• v.24 no.3
• /
• pp.11-17
• /
• 1998

Chitin is known as biodegradable natural polymer. In spite of various application of chitin derivatives from waste marine sources, commercial use of chitin has been limited due to high resistance to chemicals and the absense of proper solvents. We chitin prepared through the decalcification, bleaching and deproteination from Protunus trituberculatus shells by change of Hackman's method. Also, Microcrystalline chitin made by hydrolysis that was reduce made of resistance solvents used by dilute hydrochloric acid, ultrasonic and hydrogen peroxide. Crosslinked chitin derivatives were preparaed from chitin with crosslink agents(epichlorohydrin, 1,3-dichloropropanol) follwed by crosslinkage at 6C position. The effects of these parameters on chitin dervatives were invastigated by IR, DSC, XRD, BET, PSA and SEM. SEM analysis showed that both chitin and crosslinked chitin had a particle shaped morphology.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.7 no.2
• /
• pp.23-37
• /
• 2001

Marine environment has been polluted and damaged by many sources such as industrial waste, natural seepage, oil spill and offshore production etc. Among them, oil spill from oil tankers is one of most harmful sources to marine lives as its input amount is huge at a limited area for short period. In Korea, the port of Yeosu is known to be very vulnerable to oil spill with large amount of petroleum transported across the harbour. In this regards, the author analyzed and reviewed marine environment and appropriate response to marine oil spill at this area. For these purposes, oceanographic and meteorologic features as well as regional characteristics of harbor facilities, shipping routes, marine traffic and fisheries were investigated, also traffic densities were analyzed in order to check marine accident probabilities making direct observations for 72 hours visual1y and by portable radar.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.132-133
• /
• 2021

In recent years, energy harvesting from natural sources and waste heat has been attracting more attention from researchers in response to ever-growing energy demands, high energy prices, and climate-change-mitigation purposes. It is also an important step towards future sustainable energy usages. In thermal dynamic cycles, expanders are playing as the most important equipment for waste heat recovery and energy harvesting as well. As a kind of expander, the bladeless turbine has a promising future and more widely using owning its advantages on relatively long life, good off-design performance, easy operation cleaning and maintenance, a simple structure, no blade corrosion, and low manufacturing costs. There are numerous studies about using the Tesla Turbine as a key technology for energy harvesting in a wide range of applications and conditions. They are presented to help identify technologies that have sufficient potential for applicating to our life and marine industrial engineering. This review paper, initially, presents an overview of current studies both theoretical and experimental of Tesla Turbine usage for waste heat recovery alongside its challenges and investigation on the effect of its configuration, working fluid selection as well. To conclude, future perspectives besides possible ways of transforming waste heat energy to electricity or work, which leads to circular energy, are discussed. The ambition of this paper is to act as a first-hand reference, through the well-defined possible directions, to the young researchers and senior scientists.

• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1087-1093
• /
• 2011

The mixotrophic marine ciliate Mesodinium rubrum possesses a highly modified algal endosymbiont as a nutrition source for the species. Accordingly, we assumed that the species can reflect the ecotoxicity on marine producer (as phytoplankton) and consumer (as zooplankton) both. A series of experiments were conducted to identify the potential of the species as a standard test species for marine ecotoxicological study. The comparison of species sensitivity on reference toxic materials was made using potassium dichromate for phytoplankton and copper chloride for zooplankton. The ciliate revealed the highest sensitivity on both reference materials among the seven test species including phytoplankton, benthic copepod and rotifer species. The toxicity end point of the species was 72hr-$EC_{50}$=1.52 mg/L (as potassium dichromate) estimated by population growth inhibition (PGI), which is more sensitive than the most sensitive phytoplankton Skeletonema costatum (72hr-$EC_{50}$=3.05 mg/L). As comparison to rotifer, it also revealed higher sensitivity on copper chloride; 72hr-$EC_{50}$=0.38 mg/L for ciliate and 48hr-$EC_{50}$=0.48 mg/L for rotifer. Also, the elutriate toxicity test of various ocean disposal wastes were conducted to identify the potential of ciliate toxicity test application using industrial waste sludges. The toxicity of leather processing waste sludge was highest on the ciliate, followed by dyeing waste sludge and dye production waste sludge as an increasing order of toxicity. 72h-$EC_{50}$ of ciliate PGI test was 1.83% and that of S. costatum 3.84% for leather waste sludge which showed highest toxicity. The toxicity test results also revealed that the highest sensitivity was observed on ciliate species on ocean disposed sludge wastes. Also, ciliate toxicity test well discriminated the degree of toxicity between sludge sources; 72h-$EC_{50}$ values were 1.83% for leather processing waste sludge, 16.75% for dye production waste sludge and 27.75% for textile production waste sludge. Even the laboratory culture methods of the species were not generally established yet, the species has high potential as the standard test species for marine toxicity test in terms of the dual reflection of phyto- and zooplankton toxicity from single test, sensitivity and test replicability.

• Ocean Science Journal
• /
• v.40 no.2
• /
• pp.91-100
• /
• 2005

Bioassay using the marine bacteria, Vibrio fischeri and rotifer, Brachionus plicatilis, and chemical analyses were conducted to assess the toxicity of the various sewage sludges, one of the major ocean dumped materials in the Yellow Sea of Korea. Sludge elutriates extracted by filtered seawater were used to estimate the ecotoxicity of the sludge. Chemical characterization included the analyses of organic contents, heavy metals, and persistent organic pollutants in sludge. Bacterial bioluminescent inhibition (15 min), rotifer mortality (24 hr) and rotifer population growth inhibition (48 hr) assay were conducted to estimate the sludge toxicity. EC50 15 min (inhibition concentration of bioluminescence after 15 minutes exposed) values by Microtox(R) bioassay clearly revealed different toxicity levels depending on the sludge sources. Highest toxicity for the bacteria was found with the sludge extract from dyeing waste and followed by industrial waste, livestock waste, and leather processing waste. Clear toxic effects on the bacteria were not found in the sludge extract from filtration bed sludge and rural sewage sludge. Consistent with Microtox(R) results, rotifer neonate mortality and population growth inhibition test also showed highest toxicity in dyeing waste and low in filtration bed and rural sewage sludge. High concentrations of persistent organic pollutants (POPs) and heavy metals were measured in the samples from the industrial wastes, leather processing plant waste sludge, and urban sewage sludge. However, there was no significant correlation between pollutant concentration levels and the toxicity values of the sludge. This suggests that the ecotoxicity in addition to the chemical analyses of various sludge samples must be estimated before release of potential harmful waste in the natural environment as part of an ecological risk assessment.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.4
• /
• pp.87-93
• /
• 1998

In spite of various applications of chitin derivatives from waste marine sources, commercial use of chitin has been limited due to resistance to chemicals and the absense of proper solvents. We prepared chitin through decalcification, bleaching and deproteination from protunus trituberculatus shells by the application of Hackman's method. Structural and chemical properties of chitin were investigated to have proper specific surface area and particle size by IR, BET and PSA. The amount of absorbed water of chitin reached equilibrium by stirring about 15 minutes. The amount of absored water of the prepared chitin were large than the commercial chitin. When prepared chitin tested on dyeing wastewater, they showed better treatment efficiency in COD, suspended solid, and color tests than the commercial chitin. The adsorption capacity increased with decreasing particle size for the prepared chitin. Treatment efficiency for color was increased as the sitirring rate increased. Results show the possibility of the prepared chitin from waste marine sources as a treatment system for dyeing wastewater.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.312-322
• /
• 1999

We have studied both submarine morphology and sediment characteristics of waste disposal sites in the southwestern Ulleung Basin, East Sea, as part of a marine environmental preservation program. The Jung waste disposal site in the outer shelf is characterized by the thick accumulation of coarse-grained palimpsest sediments and fine-grained sediments from various sources. The Byung waste disposal site in the continental slope is generally characterized by hemipelagic muds with intermittent sandy sediments originated from the outer shelf and upper slope. The hemipelagic sediments, draping the seafloor, consist of fluidized muds. The core sediments show numerous bioturbation structures which cause vertical mixing of sediments. The surface sediments can be divided into four sand types (S-1, S-2, S-3, and S-4) and two mud types (M-1 and M-2) based on relative contents of reworked coarse-grained palimpsest sediments and fine-grained sediments. sorting and heavy mineral contents. The sands are probably relict sediments reworked during high-energy conditions such as typoon or storm. On the other hand, the muds were originated from various sources such as recent input from the Nakdong River, reworked fine-grained sediment from the shelf or suspended particulate matter from the East Sea Warm Current.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.265-266
• /
• 2001

PCDDS and PCDFs are very stable chcmicals and have very long residence times in the environment and in organisms, including humans. Their hydrophobicity promotes accumulation in sediments and organisms, resulting in high concentrations in both sediments and organisms. Among toxicological effects reports arc teratogenicity, reduce reproduction, liver toxicity, decreased growth rate and behavioral changes (Zeise et al., 1990; Huff, 1992). PCDDs/DFs are inadvertently produced from various combustion sources and manufacturing processes, such as municipal solid waste incineration (Olie et at., 1977), motor vehicles (Marklund et al., 1987), steel mills (Tysklind et al., 1989), and chemical production processes (Hutzinger et al., 1985). (omitted)

• Journal of Marine Life Science
• /
• v.2 no.2
• /
• pp.56-61
• /
• 2017

This study examined the environmental characteristics of shore pollution sources in the southern part of the Sinan, Jangsando area in the West Coast of Korea. A shoreline survey of the watershed was conducted to identify the pollution sources and measure the water discharge rate and microbial hygiene of water and finally estimate the possible impact area of pollution. Forty five of pollution sources in total were identified and they were grouped into sewage (33), agriculture waste water (1) and waste water from inland fish farm (11). Nine among them were discharged into the seawater and discharge volume was 72,857~281,250 l/min. Fecal coliforms of St. 72 (sewage) and St. 74 (shrimp farm) were 490 MPN/100 ml and 49 MPN/100 ml and the impact zones of the pollution were 4,389 m and 1,900 m respectively.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.1
• /
• pp.19-26
• /
• 2016

Biomass has been used for energy sources from the prehistoric age. Biomass are converted into solid, liquid or gaseous fuels and are used for heating, electricity generation or for transportation recently. Solid biofuels such as bio-chips or bio-pellet are used for heating or electricity generation. Liquid biofuels such as biodiesel and bioethanol from sugars or lignocellulosics are well known renewable transportation fuels. biogas produced from organic waste are also used for heating, generation and vehicles. Biomass resources for the production of above mentioned biofuels are classified under following 4 categories, such as forest biomass, agricultural residue biomass, livestock manure and municipal organic wastes. The energy potential of those biomass resources existing in Korea are estimated. The energy potential for dry biomass (forest, agricultural, municipal waste) were estimated from their heating value contained, whereas energy potential of wet biomass (livestock manure, food waste, waste sludge) is calculated from the biological methane potential of them on annual basis. Biomass resources potential of those 4 categories in Korea are estimated to be as follows. Forest biomass 355.602 million TOE, agricultural biomass 4.019 million TOE, livestock manure biomass 1.455 million TOE, and municipal organic waste 1.074 million TOE are available for biofuels production annually.