• KSBB Journal
• /
• v.9 no.3
• /
• pp.287-293
• /
• 1994

A bacterium isolated from waste coal mine water around Hawsun had an ability for the degradation of hydrogen sulfide. The isolate was identified as Thiobacillus sp. IW. on the basis of its morphological, physiological and chemotaxonomical characteristics. The optimum pH and temperature were 7 and $30^{\circ}C$, respectively. Growth occurred in a pH range of 3 to 9. Due to the sulfate accumulated in liquid medium, the pH decreased. As a consequence the cell growth was inhibited. Potasium nitrate and glutamic acid were utilized as a nitrogen source but urea and ammonium chloride not consumed. Denitrification occurred in a basal medium containing the glucose but did not in a basal medium containing the malate. The maximum specific growth rate of cell was 0.78h-1 and generation time was 0.9 hour. The cell productivity was 6.25mg/1$.$h and the isolate grew logarithmically up to 18 hour. These results indicate that the isolate can be a suitable bacterium responsible for degradation of hydrogen sulfide as malodorous compounds.

• Hwankyungkyoyuk
• /
• v.8 no.1
• /
• pp.66-80
• /
• 1995

The purpose of this study was to investigate the housewives's recognition and practice on prevention of environmental pollution. The subjects of this study were 250 housewives, school students' mothers, living in Cheong-ju. Major findings were as follows: 1. In washing their faces and brushing their teeth, they saved the water very well, but in taking bath, washing the dished, using the water of the lavatory they did not save the water so well. 2. The kinds of the cleansers differed in taking a bath, washing the hair, and doing the laundry respectively : what they use most was hard soaps in taking bath, liquid cleansers mixed with shampoo and linse in washing the hair, and synthetic powder detergent in laundrying. They used more synthetic detergent than natural soaps, which is known to be a cause of water pollution. Especially, when they cleansed, they did not use a measuring cup. It resulted in the waste of detergent and accelerating of water pollution. Therefore, the environmental education for them was very urgently needed. 3. In handling domestic waste, the separate collection rate of empty bottles and old newspapers was very high, but that of used phone-call cards and used batteries was extremely low. It was truly nessesary to educate and step up publicic activities on the separate collection of phone-call cards and batteries caused environmental pollution. 4. The housewives had much knowledge about environmental pollution, but they did not practice it so well in their home. 5. The housewives made more effort than their children in preventing environmental pollution and saving resources. In conclusion, what is most important for solving environmental problem was for each citizen to make an effort to prevent environmental pollution, and the government's support and producing the atmosphere of the society for this was really needed.

• Microbiology and Biotechnology Letters
• /
• v.7 no.4
• /
• pp.191-195
• /
• 1979

This study was conducted to investigate the effect of saccharified extract of ginseng meal on alcohol fermentation and reproduction of yeast. Different concentrations of saccharified extract of ginseng meal in liquid medium were tested, and the experimental results obtained were summarized as follows : 1. In the process of alcohol fermentation of yeast, $CO_2$ output was much accelerated by the higher concentration of saccharied extracts from 1％ to 6％, but $CO_2$ output was disurbed at the concentrations of 10％ and 15％. .2. In the process of alcohol fermentation of yeast, the production of alcohol was increased by the higher concentration of saccharified extracts from 1％ to 6％, but decreased at the concentrations of 10％ and 15％. 3. Number of reproduced yeast cell after aerobic culture of Sacc. cervisiae was increased by the higher concentration of saccharified extracts from 1％ to 10％, but decreased at the concentration of 15％. The number of yeast cell at the concentratin of 10％ extract was 1.6 times more than that of control.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.2
• /
• pp.67-74
• /
• 2011

This research focused on the investigation of runoff and nonpoint sources (NPS) pollution characteristics from small soil box plots treated by livestock waste composts. An indoor rainfall simulation was performed over the plots for 60 minutes. Simulated rainfall intensities were 32.4, 43.2, 50.3 and 57.1 mm/hr respectively. Slope of soil box plots was $10^{\circ}$ and $20^{\circ}$, respectively. Rainfall simulation replicated 5 times and the experiment was conducted every four days five times. As the slope of soil box increased, NPS pollution loads increased. And as rainfall intensity was increased from 32.4 to 57.1 mm/hr, NPS pollution loads gradually increased, too. Discharge of NPS pollution loads was the largest in the first simulation and thereafter decreased gradually. Discharged BOD load to the total applied load from $10^{\circ}$ plots, ranged 0.2 to 0.7 %, was 8.4 to 50.0 % lower than slope $20^{\circ}$ plots. When the application rate increased twice, the increase of pollution load was between 1.7~5.7 times. Analysis of Pearson's correlation coefficient showed that organic matter content in pig compost and NPS pollution loads were correlated well. While under liquid compost application, the correlation coefficients between them were not good. It was concluded that application of livestock resources need to consider long-term weather forecast and if necessary, NPS reduction measures must be preceded in order to reduce NPS pollution discharge.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.2
• /
• pp.97-100
• /
• 1987

Medium grade mongranular compound fertilizers for the crops under vinyl mulching cultivation were formulated using the principal materials of urea, DAP and MOP in combination with various fillers of zeolite, gypsum and treated human waste and granulated with waste liquid of glutamic acid fermentation as binder. The ratios of $N-P_2O_5-K_2O$ of trial products were 12-10-11.5 for red pepper, 8-8-6 for sesame and 4-9-14 for peanut. The rate of dissolution of trial products was comparatively low in water. The product for red pepper had N dissolution rate of 80 percent during 24 hrs. 70 for peanut and 55 for seasame. The optimum dissolution rate has reported to be 50 percent by the standard laboratory dissolution test for 24 hrs. in water. Therefore, the slowly released characteristics were obtained with the products that had 24 hrs. dissolution of 70 to 60 percent. One time basal application of trial products could readily be justified under muching cultivation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.161-176
• /
• 2021

In this study, the electrochemical behavior of Sm on the binary liquid Al-Ga cathode in the LiCl-KCl molten salt system is investigated. First, the co-reduction process of Sm(III)-Al(III), Sm(III)-Ga(III), and Sm(III)-Ga(III)-Al(III) on the W electrode (inert) were studied using cyclic voltammetry (CV), square-wave voltammetry (SWV) and open circuit potential (OCP) methods, respectively. It was identified that Sm(III) can be co-reduced with Al(III) or Ga(III) to form Al_zSm_y or Ga_xSm_y intermetallic compounds. Subsequently, the under-potential deposition of Sm(III) at the Al, Ga, and Al-Ga active cathode was performed to confirm the formation of Sm-based intermetallic compounds. The X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) analyses indicated that Ga₃Sm and Ga₆Sm intermetallic compounds were formed on the Mo grid electrode (inert) during the potentiostatic electrolysis in LiCl-KCl-SmCl₃-AlCl₃-GaCl₃ melt, while only Ga₆Sm intermetallic compound was generated on the Al-Ga alloy electrode during the galvanostatic electrolysis in LiCl-KCl-SmCl₃ melt. The electrolysis results revealed that the interaction between Sm and Ga was predominant in the Al-Ga alloy electrode, with Al only acting as an additive to lower the melting point.

• Computers and Concrete
• /
• v.24 no.2
• /
• pp.151-158
• /
• 2019

The sustainable development principle of replacing natural resources with renewable material is an important research topic. In this study, waste LCD (liquid crystal display) glass powder was used to replace cement (0%, 10%, 20% and 30%) through a volumetric method using three water-binder ratios (0.47, 0.59, and 0.71) to make cement mortar. The compressive strength was tested at the ages of 7, 28, 56 and 91 days. The test results show that the compressive strength increases with age but decreases as the water-binder ratio increases. The compressive strength slightly decreases with an increase in the replacement of LCD glass powder at a curing age of 7 days. However, at a curing age of 91 days, the compressive strength is slightly greater than that for the control group (glass powder is 0%). When the water-binder ratios are 0.47, 0.59 and 0.71, the compressive strength of the various replacements increases by 1.38-1.61 times, 1.56-1.80 times and 1.45-2.20 times, respectively, during the aging process from day 7 to day 91. Furthermore, a prediction model of the compressive strength of a cement mortar with waste LCD glass powder was deduced in this study. According to the comparison between the prediction analysis values and test results, the MAPE (mean absolute percentage error) values of the compressive strength are between 2.79% and 5.29%, and less than 10%. Thus, the analytical model established in this study has a good forecasting accuracy. Therefore, the proposed model can be used as a reliable tool for assessing the design strength of cement mortar from early age test results.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.73-73
• /
• 2017

Pyroprocessing at KAERI (Korea Atomic Energy Research Institute) consists of pretreatment, electroreduction, electrorefining and electrowinning. SFR (Sodium Fast Reactor) fuel is prepared from the electrowinning process which is composed of LCC (Liquid Cadmium Process) and Cd distillation et al. LCC is an electrochemical process to obtain actinides from spent fuel. In order to recover actinides inert anodes such as carbon material are used, where chlorine gas ($Cl_2$) evolves on the surface of the carbon material. And, stainless steel (SUS) crucible should be installed in large-scale electrowinning system. Therefore, the effect of chlorine on the SUS material needs to be studied. LiCl-KCl-$UCl_3$-$NdCl_3$-$CeCl_3$-$LaCl_3$-$YCl_3$ salt was contained in 2 kinds of electrolytic crucible having an inner diameter of 5cm, made of an insulated alumina and an SUS, respectively. And, three kinds of electrodes such as cathode, anode, reference were used for the electrochemical experiments. Both solid tungsten (W) and LCC were used as cathodes. Cd of 45 g as the cathode material was contained in alumina crucibles for the deposition experiments, where the crucible has an inner diameter of 3 cm. Glassy carbon rod with the diameter of 0.3 cm was employed as an anode, where shroud was not used for the anode. A pyrex tube containing LiCl-KCl-1mol% AgCl and silver (Ag) wire having a diameter of 0.1cm was used as a reference electrode. Electrodeposition experiments were conducted at $500^{\circ}C$ at the current densities of $50{\sim}100mA/cm^2$. In conclusion, Fe ions were produced in the salt during the electrodeposition by the reaction of chlorine evolved from the anode and Fe of the SUS crucible and thereby LCC system using SUS crucible showed very low current efficiencies compared with the system using the insulated alumina crucible. Anode shroud needs to be installed around the glassy carbon not to influence surrounding SUS material.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2017.10a
• /
• pp.74-74
• /
• 2017

Electrorefining is a key step in pyroprocessing. The electrorefining process is generally composed of two recovery steps - the deposit of uranium onto a solid cathode and the recovery of the remaining uranium and TRU elements simultaneously by a liquid cadmium cathode. Uranium deposit recovered from the solid cathode is a dendritic powder. It is necessary to separate the adhered salt from the deposits prior to the consolidation of uranium deposit. The adhered salt is composed of lithium, potassium, uranium, and rare earth chlorides. Distillation process was employed for the cathode processing. One of the operation methods is distillation of the salt at low temperature ($900^{\circ}C$), and then melting of the deposit at high temperature to avoid a backward reaction. For the development of the salt distiller, the distillation behavior of the low vapor pressure chlorides should be studied. Rare earth chlorides in the adhered salt of uranium deposits have relatively low vapor pressures compared to the process salt (LiCl-KCl). In this study, the evaporation rates of the lanthanum and neodymium chlorides were measured for the salt separation from electrorefiner uranium deposits in the temperature range of $825{\sim}910^{\circ}C$. The evaporation rate of both chlorides increased with an increasing templerature. The evaporation rate of lanthanum chloride varied from 0.12 to $1.68g/cm^2/h$. Neodymium chloride was more volatile than lanthanum chloride. The evaporation rate of neodymium chloride varied from 0.20 to $4.55g/cm^2/h$. The evaporation rate of both chlorides are more than $1g/cm^2/h$ at $900^{\circ}C$. Even though the evaporation rates of both chlorides were less than that of the process salt, the contents of the lanthanide chlorides were small in the adhered salt. Therefore it can be concluded that $900^{\circ}C$ is suitable for the operation temperature of the salt distiller.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.644-655
• /
• 2023

Purpose: Metal fires occur in metal handling, processing, waste storage plants, etc. It is difficult for firefighters to extinguish metal fires, and it takes a long time, so caution is needed in fire suppression. Method: In this study, current statistics and problems of metal fires were introduced, and then the effectiveness was verified by experiments with using fire extinguishing agents used in Korea. Comparative suppression experiments of 5 different fire extinguishing agents for burning powders of 99.9% magnesium over 150 ㎛ were performed following the metal powder type test method of Class D fire in ISO 7165. Result: 5 fire extinguishing agents are the power types of dry sands and expanded vermiculites most commonly used in Korea, the certified class D fire extinguisher used abroad, and ochers requiring verification, and the liquid silica gel. Conclusion: The results of experiments showed expanded vermiculites were the best metal fire extinguishing agent considering effectiveness, convenience of use, and economical feasibility.