• 한국입자에어로졸학회지
• /
• 제10권4호
• /
• pp.131-136
• /
• 2014

The importance of waste treatments is increasing because of the lack of resources and environmental problems resulted from economic growth policy. Especially, the pollutant dust which is one of the wastes should be treated considerately because it could cause secondary damages on the human health as well as environmental systems. Recently, massive amount of coal fly-ash is being produced in thermoelectric power plants. In this study, we compared two general methods used in estimating the amount of unburned carbon in fly-ashes to categorize the coal fly-ashes into several groups following their carbon contents. One is the "loss on ignition(KS L 5405) method" which estimates the change of mass after combustion, and it is generally used. Another one is measuring $CO_2$ gas content by burning solid carbon in the fly-ash, and it is called "$CO_2$ analysis method."

• KSBB Journal
• /
• 제6권2호
• /
• pp.135-141
• /
• 1991

This study thus looks into two treatment processess : i) Anaerobic digester coupled with hollow fibre membrane unit. Treatment of starch waste with anaerobic digester-membrane system was studied. $0.17\m^2$ area of hollow fibre membrane unit of known pore size was immersed into laboratory-scale anaerobic digestion system. The pore size of membrane was varied from 0.03 to $\0.15mu$m. The hydraulic retention time of anaerobic digester was varied from 1.5 to 10 days. The effect of hydraulic retention time on treatment efficiency was significant while effect of membrane size was not significant. The gas production was about 0.74㎥/kg COD treated. The COD removal efficient was about 80-95% depending on the hydraulic retention time. ii ) Crossflow ultrafiltration as post treatment to anaerobic filter. The effluent from anaerobic filter, which had a total COD in the range of 4,500-5,200 mg/L was treated by crossflow ultrafiltration units. The study conducted with different membrane pore size indicated that membrace with 1,000,000 molecular weight cut-off size gave a higher COD removal efficiency in the range of 83-87% while giving a study flux of $120-130 L/\m^2$.h. A study was conducted to see the long term clogging effect of membrane also.

• 농업생명과학연구
• /
• 제44권3호
• /
• pp.7-14
• /
• 2010

Alternative subirrigation way, capillary wick system (CWS) was tested to reduce labor cost, waste water, contamination of ground water, and use of fungicide compared to overhead irrigation system (OIS). CWS helped reduce remarkably the working hours for watering from 4 hours in OSI to just 5 minutes. Labor cost was saved 98% in CWS compared to OIS. By the physical characteristics of various growing media, 1 coconut coir+2 perlite (v/v) mixture was selected because it had an ideal distribution of three phase, e.g. 1 solid: 1 liquid: 2 gas phase. Medium mixture containing scoria had so high bulk and particle density to hurt root. In bark-containing medium, the liquid phase and the percent saturation of liquid phase with time elapsed was lower than that of other mixture. It meant that the mixture contained very low level of water. Application of CWS for cyclamen pot production played an important role in reducing the incident of fusarium wilt symptom from 18% in conventional over watering system to 4%. Cyclamen pot irrigated by capillary wick had shorter petiole and more leaves than those by overhead watering. As a result, this system was highly beneficial to get uniform pot products with high quality. It improved water and nutrient solution efficiency relative to conventional overhead irrigation system (OIS).

• Bulletin of the Korean Chemical Society
• /
• 제16권7호
• /
• pp.582-588
• /
• 1995

The preconcentration and determination of trace Cd(Ⅱ), Cu(Ⅱ), Pb(Ⅱ), Mn(Ⅱ) and Zn(Ⅱ) in water samples were studied by the precipitate flotation using La(OH)3 as a coprecipitant. The analytes were quantitatively coprecipitated by adding 3.0 mL of 0.1 M La(Ⅲ) solution in a 1,000 mL water sample and adjusting the pH to 9.5 with NaOH solution. After the addition of the 1:8 mixed surfactant solution of each 0.1% sodium oleate and sodium lauryl sulfate, the solution was stirred with a magnetic stirrer for 10 minutes. The precipitates were floated to the surface by bubbling with nitrogen gas and collected in a small sampling bottle. The precipitates were dissolved in nitric acid and then the solutions were diluted to 25.00 mL with a deionized water. The analytes were determined by flame atomic absorption spectrometry. This procedure was applied to the waste water analysis. This technique was simple, convenient and especially rapid for the analysis of a large volume of sample. And also, from the recoveries of better than 92% which were obtained from real samples, this method could be judged to be applicable to the preconcentration and quantitative determination of trace elements in water samples.

• 한국환경과학회지
• /
• 제28권10호
• /
• pp.887-898
• /
• 2019

Rehabilitation work is required to increase well productivity, which decreases with the elapsed time of pumping owing to the clogging of the water well. Clogging causes not only a reduction in the well productivity but also a deterioration of the water quality. For unclogging and rehabilitating wells, several techniques are used such as brushing, air surging, surge blocks, and gas impulse. In this study, the high-pressure air impulse technique, which effectively and economically rehabilitates wells, was applied to a riverbank filtration site in Korea for the same objective. At most of the wells, the hydraulic parameters (transmissivity, storage coefficient, and specific capacity) were increased by the application of the high-pressure air impulse technique. The well loss change values also indicate an increase in the hydraulic parameters by the air impulse implementation. Thus, the high-pressure air impulse technique can be efficiently and economically applied to water and riverbank filtration wells for rehabilitating the decreased productivity.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1717-1722
• /
• 2021

This study is devoted to the ability of carbon fiber material samples impregnated with various amounts of barium iodide and triethylenediamine to remove radioactive methyliodide from air streams. The main sorption characteristics of impregnated UVIS® carbon fiber were determined and the use of this material for purifying of technological gas flows at nuclear power plants was evaluated. The methyliodide trapping efficiency by samples impregnated with barium iodide, TEDA, and their mixture was 83.4 ± 0.8%; 93.1 ± 0.6% and 93.5 ± 0.7% respectively, under the same conditions. The study established a significantly higher capacity (8.3 ± 0.07 mg/cm²) of samples impregnated simultaneously with both chemical compounds toward methyliodide. Under the same test conditions, the values of this parameter for the samples impregnated separately with TEDA and BaI₂ were 2.85 ± 0.05 mg/cm² and 0.86 ± 0.04 mg/cm², respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권8_spc호
• /
• pp.1244-1255
• /
• 2019

Dairy goat production continues to be a socially, economically and culturally important part of the livestock industry in North, Central and South America and the Caribbean islands. Goat milk, cheese and other dairy products offer consumers food products with nutritional, health and environmental benefits. In North America, Mexico produces the greatest volume of goat milk, but most is for family or local consumption that is typical of a mixed farming system adopted by subsistence farmers in dry areas. The United States is not yet a large global goat milk producer, but the sector has expanded rapidly, with dairy goat numbers doubling between 1997 and 2012. The number of dairy goats has also increased dramatically in Canada. Commercial farms are increasingly important, driven by rising demand for good quality and locally sourced goat cheese. In South America, Brazil has the most developed dairy goat industry that includes government assistance to small-scale producers and low-income households. As of 2017, FAO identified Haiti, Peru, Jamaica, and Bolivia as having important goat milk production in the Western Hemisphere. For subsistence goat producers in the Americas on marginal land without prior history of chemical usage, organic dairy goat production can be a viable alternative for income generation, with sufficient transportation, sanitation and marketing initiatives. Production efficiency, greenhouse gas emission, waste disposal, and animal welfare are important challenges for dairy goat producers in the Americas.

• 대한건축학회논문집:구조계
• /
• 제35권6호
• /
• pp.121-128
• /
• 2019

There is a big move to build zero-energy buildings in the form of passive houses that reduce energy waste worldwide. Korea has set a goal of reducing its greenhouse gas emissions by 37% by 2030 through the activation of green buildings, such as strengthening the energy levels of new buildings and improving the energy efficiency of existing buildings. The use of insulation with high insulation performance is one of the key technologies to realize this, and vacuum insulation is the next generation insulation that blocks the energy flow of the building. In this study, we measured the bonding structure of dry and wet processing glass fiber core materials and compared the insulation performance of vacuum insulation panel. In addition, the insulation performance of vacuum insulation panel was measured according to the thickness of the laminated core. It can be confirmed that the lamination structure of the core and the lamination thickness are important factors for the heat insulating performance of the vacuum insulating panel.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.349-355
• /
• 2021

The article investigates the conceptual principles of transformation of industrial parks into eco-industrial ones in the conditions of sustainable development. It is substantiated that the concept of sustainable development in the transformation of industrial parks is to grow industry and jobs, modernize production and introduce innovative technologies, resource and energy efficiency, reduce greenhouse gas emissions and waste storage, social protection of local communities and create favorable infrastructure. It is determined that for the transformation of industrial parks, it is necessary to improve regulatory changes, introduce criteria for compliance of industrial parks and the importance of their consideration, ensure park management by the management company and create favorable incentives for industrial entry into industrial symbiosis. It is proved that industrial parks can be an incentive for industrial development and competitiveness of enterprises. The availability of talented human capital, attractive territories, minerals, energy and mineral resources, developed domestic market, agricultural potential, transport networks is becoming an attractive place for investment and development. Industrial parks need investment. Transformation into eco-industrial parks through the implementation of sustainable development goals opens additional opportunities for access to investment funds and contributes to the implementation of growth and prosperity strategies of the country.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.276-283
• /
• 2024

Currently, the overall tendency for green and sustainable economic development is creating a circular economy. In actuality, agricultural output is currently benefiting greatly from the growth of the circular economy. The creation of a circular economy helps address resource scarcity, save the environment, combat climate change, and increase economic efficiency. Vietnam's economy can grow quickly and sustainably by shifting to a circular economy production model. Comparing prior growth techniques to the digital age and implementing circular economic development connected with high technology will be a fantastic opportunity to boost growth efficiency. In actuality, Vietnam currently has a large number of agricultural circular economy models. These are models: Creating and using gas from waste and wastewater in livestock and farming; model combining cultivation, livestock, and aquaculture; agro-forestry model; garden-forest model; Circular model using agricultural by-products as a catalyst or creating other valuable products; model of moderation, linked to reducing the use of growth hormones, veterinary medications, pesticides, and artificial fertilizers in agriculture and animal husbandry. Unfortunately, there have been few studies and applications of the aforementioned models, which has made it difficult to build the agricultural sector sustainably. In this paper, we outline the current situation and propose solutions to develop a circular economy model in agriculture in Vietnam for sustainable development.