• 터널과지하공간
• /
• 제29권4호
• /
• pp.262-279
• /
• 2019

고준위방사성폐기물처분장의 공학적 방벽에서는 다양한 원인으로 인해 기체가 발생한다. 만약 기체 생성 속도가 기체 확산 속도보다 빠를 경우 기체의 압력이 증가하게 되고, 기체 유입 압력(gas entry pressure)을 넘어서게 되면 기체가 급격히 벤토나이트 완충재를 통과하는 기체 이동 현상(gas migration)이 발생하게 되며 이는 사람과 주변 환경을 방사능에 노출시킬 수 있기 때문에, 공학적 방벽의 장기 건전성 확보 측면에서 기체 이동 현상을 명확히 규명하는 것이 매우 중요하다. 특히 벤토나이트 완충재와 같이 점토 물질을 다량 함유한 매질에서만 나타나는 매우 중요한 기체 흐름 현상인 팽창 흐름에 대한 수리-역학적 메커니즘을 규명하고, 기체 이동 현상의 정량적 평가를 위한 새로운 수치 해석 기법 개발 및 검증이 필수적이다. 따라서 본 연구에서는 공학적 방벽에서의 기체 이동 현상을 모사하고자 역학 손상 모델 및 손상도를 고려한 2상 유동 모델을 개발하였으며, 일정 체적 경계 조건 하에서의 1차원 기체 주입 시험 모사를 통해 개발된 모델의 적용성을 검토하였다. 수치 해석 결과 공극 수압 및 응력, 기체 유출량이 팽창 흐름 발생 시 급격히 증가하는 현상을 모사할 수 있었다.

• 환경영향평가
• /
• 제14권6호
• /
• pp.365-375
• /
• 2005

For managing and utilizing a closed municipal solid waste landfill site in environmentally secure conditions, it is necessary to verify the stabilization level of landfill gas(LFG) and waste. For assessing LFG and waste stabilization of an open-dumping municipal solid waste landfill (Salmi Landfill) which is located at the vicinity of Chungju Reservoir which flows into Paldang Reservoir that has been used for Seoul Metropolitan water supplies, the history and the surrounding characteristics of the landfill site were surveyed. In this study, waste and LFG samples obtained from landfill site were physically and chemically analyzed, and then the analysis results were evaluated on the basis of 'The Criteria of Landfill Waste Stabilization(CLWS)' that were promulgated by Korean Ministry of Environment. Based on LFG composition of Salmi landfill, $CH_4$ was as high as 68%. In CLWS regulation, the stabilization criteria of $CH_4$ should be lower than 5%, and the criteria of C/N ratio should also be lower than 1/10. The result showed that C/N ratio of landfilled waste ranged 17.4~24.7. From this results, it was concluded that the LFG and C/N ratio stabilization level of this landfill based on the CLWS were still actively proceeding.

• Environmental Engineering Research
• /
• 제25권4호
• /
• pp.462-469
• /
• 2020

This study is proposing a System Dynamics Model for estimating Greenhouse Gas (GHG) emission from treating Municipal Solid Waste (MSW) in South Korea for years 2000 to 2030. The government of country decided to decrease the total GHG emission from waste sector in 2030 as per Business-as-usual level. In context, four scenarios are generated to predict GHG emission from treating the MSW with three processes i.e., landfill, incineration and recycling. For prior step, MSW generation rate is projected for present and future case using population and waste generation per capita data. It is found that population and total MSW are directly correlated. The total population will increase to 56.27 million and total MSW will be 21.59 million tons in 2030. The methods for estimating GHG emission from landfill, incineration and recycling are adopted from IPCC, 2006 guidelines. The study indicates that Scenario 2 is best to adopt for decreasing the total GHG emission in future where recycling waste is increased to 75% and landfill waste is decreased to 7.6%. Lastly, it is concluded that choosing proper method for treating the MSW in country can result into savings of GHG emission.

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.439-455
• /
• 2020

Numerical model was developed that simulates radionuclide (3H and 14C) transport modeling at the 2nd phase facility at the Wolsong LILW Disposal Center. Four scenarios were simulated with different assumptions about the integrity of the components of the barrier system. For the design case, the multi-barrier system was shown to be effective in diverting infiltration water around the vaults containing radioactive waste. Nevertheless, the volatile radionuclide 14C migrates outside the containment system and through the unsaturated zone, driven by gas diffusion. 3H is largely contained within the vaults where it decays, with small amounts being flushed out in the liquid state. Various scenarios were examined in which the integrity of the cover barrier system or that of the concrete were compromised. In the absence of any engineered barriers, 3H is washed out to the water table within the first 20 years. The release of 14C by gas diffusion is suppressed if percolation fluxes through the facility are high after a cover failure. However, the high fluxes lead to advective transport of 14C dissolved in the liquid state. The concrete container is an effective barrier, with approximately the same effectiveness as the cover.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.378-387
• /
• 2004

This study was carried to investigate the emission characteristics of mercury from domestic and industrial MSW (municipal solid waste) incinerator stacks. The mercury concentration levels of flue gas from 32 MSW incinerators stacks selected were above the criteria level ($5{\mu}g/S\;m^3$). MSWI facilities exceeding the criteria levels in Korea are due to the poor units comparison of combustion chamber(CC)-cyclone(CY)-stack. So, the mercury from MSW incinerators stack were suspected to contaminate the natural system unless the MSW incinerators were properly controlled. Mean-while, the relationship between mercury concentration and temperature of flue gas in MSW incinerator stacks were examined at two temperature ranges (Group A : $29.85{\sim}327.63^{\circ}C$, Group B : $446.9{\sim}848.15^{\circ}C$). The mercury concentration in flue gas with high temperature range was higher than that of flue gas with low temperature rage. This mean that the temperature of flue gas plays an important role in mercury control in MSW incinerator. The emission characteristics oi mercury was also evaluated by using the correlation matrix between the mercury and NOx, $PM_{10}$, moisture (MO.) at both low temperature and high temperature flue gas ranges. The mercury concentration was mainly affected by NOx, $PM_{10}$. moisture (MO.) at low temperature range, while the mercury concentration at high temperature flue gas was mainly affected by NOx, moisture (MO.). From these results, it was suggested that the temperature of cooling system and the air pollution control device should be properly regulated in order to control mercury of flue gas in MSWI incinerator.

• 신재생에너지
• /
• 제6권2호
• /
• pp.27-32
• /
• 2010

Low Calorific Gas Turbine (LCGT) has been developed as a next generation power system using landfill gas (LFG) and biogas made from various organic wastes, food Waste, waste water and Livestock biogas. Low calorific fuel purification by pretreatment system and carbon dioxide fixation by green house system are very important design target for the optimum applications of LCGT. Main troubles of Low Calorific Gas Turbine system was derived from the impurities such as hydro sulfide, siloxane, water contained in biogas. Even if the quality of the bio fuel is not better than natural gas, LCGT may take low quality gas fuel and environmental friendly power system. The mechanical characterisitics of LCGT system is a high energy efficiency (>70%), wide range of output power (30 kW - 30 MW class) and very clean emission from power system (low NOx). A green house has been designed for four different carbon dioxide concentration from ambient air to 2000 ppm by utilizing the exhaust gas and hot water from LCGT system. LCGT is expected to contribute achieving the target of Renewable Portfolio Standards (RPS).

• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.122-130
• /
• 2005

Gasification of carbonaceous wastes such as shredded tire, waste lubricating oil, plastics, and powdered coal initiates a single-stage reforming reactor(reformer) Without catalyst and a syngas burner. Syngas is combusted with $O_2$ gas in the syngas burner to produce $H_2O\;{and}\;CO_2$ gas with exothermic heat. Reaction products are introduced into the reforming reactor, reaction heat from syngas burner elevates the temperature of reactor above $1,200^{\circ}C$, and hydrogen gas fraction reaches 65% of the product gas output. Reactants and heat necessary for the reaction are provided through the syngas burner only. Neither $O_2$ gas nor steam is injected into the reforming reactor. Multiple syngas burners may be connected to the reforming reactor in order to increase the syngas output, and the product syngas is recycled into syngas burner.

• 한국기후변화학회지
• /
• 제8권1호
• /
• pp.57-62
• /
• 2017

Greenhouse gas (GHG) emissions of private industry of Chungcheongbuk-do were estimated. GHG emissions were classified by industry and GHG emissions ratio of each industry of Chungcheongbuk-do was found. Characteristics of GHG emissions of Chungcheongbuk-do and GHG mitigation technology were analyzed. To calculate GHG emissions, equations proposed through GHG emissions calculation guidelines published by Korean Energy Agency in 2009 were used. As a result, GHG emissions ratio of cement, semiconductor, paper and petrochemical industry was about 73%, 16%, 5%, and 2% respectively. GHG mitigation technologies of cement, semiconductor and waste were investigated. For cement, amine technology, for semiconductor, scrubber system and for waste, land fill gas utilization were analyzed.

• 대한토목학회논문집
• /
• 제32권6B호
• /
• pp.399-406
• /
• 2012

본 연구의 목적은 폐기물매립지에서의 온실가스 발생량 예측모델 및 모델에 적용된 변수들의 산정방법을 개발하는 것이다. 본 연구에서는 온실가스 발생예측 모델 중 1차 반응모델의 변수인 메탄잠재발생량과 메탄발생속도상수를 평가하기 위하여 수정 Gompertz 식과 Logistic 식을 미분한 2개의 식을 적용하였다. 변수들은 실제 폐기물매립지에서의 매립가스 발생량에 대한 실측값과 예측값과의 통계학적 비교를 통해 산정하였다. 매립가스 발생량에 대한 실측값과 수정 Gompertz 식 및 Logistic 식을 미분하여 나타낸 2개의 식을 이용한 매립가스 발생량 예측값에 대한 회귀분석결과 결정계수는 각각 0.92와 0.94로 나타나, 폐기물매립지에서의 매립가스 발생량에 대한 측정값이 있을 경우 회귀분석을 통해 변수를 산정할 수 있는 것으로 나타났다. 또한 실측값이 없는 폐기물매립지에서의 온실가스 발생량을 예측할 수 있도록 하기 위하여 수정 Gompertz 식과 Logistic 식을 미분한 2개의 식을 기초로 하여 예측모델을 개발하였으며, 이 모델들의 정확성을 평가하기 위하여 Qcs(실측값):Q(예측값)의 비에 대한 빈도분포를 평가한 결과 LandGEM 모델보다 높은 정확성을 나타내었다. 따라서 본 연구에서 개발한 모델들은 폐기물매립지에서의 온실가스 발생량 예측에 적합한 것으로 사료된다.

• 한국토양환경학회지
• /
• 제5권3호
• /
• pp.35-54
• /
• 2001

가스와 물이 공존하는 쓰레기 매립지에 개설된 여러개의 포집정으로부터 매립가스와 침출수의 추출량을 정확히 예측한다는 것은 매우 어렵다. 그러나 매립지 공극에 포함된 침출수와 가스의 상대적인 투과능력을 파악할 수 있다면 추출량을 어느정도 예측할 수 있다. 즉, 현장과 유사한 실험환경에서 침출수와 가스의 상대유체투과도를 측정하여 이 값을 다공질 매질을 통과하는 다상 유체유동방정식의 입력자료로 사용함으로써 포집정으로부터 각상의 추출량을 얻을수 있다.