• 한국전산유체공학회지
• /
• 제7권3호
• /
• pp.17-26
• /
• 2002

Computational fluid dynamic(CFD) analysis has been frequently applied to the waste incinerators to understand the flow performance for various design and operating parameters. Since the computational modeling inevitably requires many simplifications and complicated sub-models, validity of the results should be carefully evaluated. In this study, major computational modeling and procedure of usual simulation methods for the grate-type waste incinerators were assessed. Usual simulation method does not explicitly incorporate the waste combustion, simply by assuming the combustion gas properties from the waste bed which is treated as an inlet plane. However, effect of this arbitrary assumption on the overall flow pattern is not significant, since the flow pattern is dominated by strong pattern of jet flows of the secondary air. Thus, this method is valid in understanding the effect of flow-related parameters. In analyzing the results, deriving conclusive information directly from temperature and chemical species concentration should be avoided, since the model prediction for the gaseous reaction and the radiation reveals significant discrepancies against the actual phenomena. Use of quantitative measures such as residence time is very efficient in evaluating the flow performance.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.129-134
• /
• 2020

The main reason that drives many developing countries to pursue waste-to-energy (WtE) technologies is that it produces energy while eliminating build-up of large quantities of wastes, at a time, when oil and gas reserves are declining. The rate of generation of municipal solid wastes (MSW) in any given country depends on many factors including economy, population, and modernization of industry and infrastructure developments. The United Arab Emirates (UAE) is a federation of seven emirates that has grown to be one of the Middle East's most important economic centers. UAE has also become one of the highest waste producing countries due to fast development and growth; thus, UAE pursue modern technologies to covert generated wastes into energy. In this communication, the status of on-going waste to energy projects and WtE plants that are currently under design and construction in UAE are discussed. The need for development of WtE technologies is presented based on the literature, reports, economics and the environmental regulations.

• 환경위생공학
• /
• 제24권4호
• /
• pp.80-89
• /
• 2009

In the organic waste, food waste is the most difficult controls. In the study, food waste was treatmented to removal only the dockage. To decrease the hydrogen sulfide($H_2S$) in the produced biogas, iron chloride put in the anaerobic digester. Respectively treatment quantity of the food waste, content of the methane($CH_4S$) gas in the biogas, produced gases quantity, put in the quantity of the Iron chloride, pH, TS, Alkalinity, VFA, Ammonia. The results obtained from the experiment are as follows: 1. The produced biogases quantity/the treatment quantity of the food waste was $83.82{\sim}129.41m^3/ton$. 2. The content of the hydrogen sulfide($H_2S$) in the produced biogas is below of the 500ppm. The iron chloride put in the anaerobic digester. 200~300kg of the iron chloride put in the anaerobic digester at the steady-state. 400~850kg of the iron chloride put in the anaerobic digester at the unsteady-state. 3. Factor of the operator was the pH: 7.7~8.4, content of mathane: 55~65%. 4. TS(total solid) of the digestor sludge was 17~20%, Alkalinity was 38,500~41,750ppm, VFA(Volatile Fatty Acids) was 2,800~2,420ppm, Ammonia was 4,300~3,650ppm.

• 한국환경보건학회지
• /
• 제31권6호
• /
• pp.483-488
• /
• 2005

The waste seashells were used for the removal of hydrogen sulfide from a hot gas stream. The sulphidation of waste seashells with $H_{2}$S was studied in a thermogravimetric analyzer at temperature between 600 and $800^{circ}C$. The desulfurization performance of the waste seashell sorbents was experimentally tested in a fixed bed reactor system. Sulfidation experiments performed under reaction conditions similar to those at the exit of a coal gasifier showed that preparation procedure and technique, the type and the amount of seashell, and the size of the seashell affect the $H_{2}$S removal capacity of the sorbents. The pore structure of fresh and sulfided seashell sorbents was analyzed using mercury porosimetry, nitrogen adsorption, and scanning electron microscopy (SEM). Measurements of the reaction of $H_{2}$S with waste seashells show that particles smaller than 0.631 mm can achieve high conversion to CaS. According to TGA and fixed bed reactor results, temperature had influenced on $H_{2}$S removal efficiency. As desulfurization temperature increased, desulfurization efficiency increased. Also, maximum desulfurization efficiency was observed at $800^{circ}C$. Desulfurization was related to calcinations temperature.

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1097-1101
• /
• 2002

Activated carbon is amorphous and its intraparticle pores are well developed. Thus it has high adsorption capabilities and catalytic effect, and is utilized in many areas of industries such as food processing. In recent years, the demand of activated carbon has been increased to solve the environmental problems-waste treatment and removal of poisonous gas. Therefore, in this study an activated carbon was made using the waste and then the industrial characteristics of the produced activated carbon were investigated. The result showed that the carbonization yield was decreased when carbonization temperature was increased from 400 to $600^{\circ}C$ and that the optimal carbonization temperature was $500^{\circ}C$. The optimal concentration of NaOH for removing ash in the raw sample was 1~2N. The iodine adsorption of activated carbon using waste sample at $500^{\circ}C$ carbonization was 1204.28mg/g. The activation result of carbonization sample showed that the optimal activation condition was the carbonization at $500^{\circ}C$ and the activation at $800^{\circ}C$. So the production of activated carbon was thought to be possible, reused as resource, and decreased the environmental pollution.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.731-743
• /
• 2018

This study was performed to test the feasibility of thermophilic ($55^{\circ}$) co-digestion of municipal sewage sludge and food wastes. The management variables of co-digestion were the mixed ratios of municipal sewage sludge and food waste hydraulic retention times (HRTs). During the operation of thermophilic co-digestion, the reactor pH ranged from 7.0 to 7.5 and the reactor alkalinity remained above 3,200 to 4,000 mg/L as $CaCO_3$. The volatile fatty acids concentration increased as the HRT shortened from 20 days to 10 days and the mixture ratio increased to 1:4, but did not reach toxic levels for co-digestion of sewage sludge and food wastes. Methane productivity increased gradually as the organic loading rate increased. Maximum methane productivity reached 1.03v/v-d at an HRT of 10 days and at the mixture ratio of 1:4. The TVS removal efficiency decreased from 70.6% to 58.3% as the HRT shortened from 20 days to 10 days. TVS removal efficiency ranged from 57.0% to 77% during the entire operation. It is likely that thermophilic co-digestion of sewage sludge and food wastes is a very effective method both to environmentally treat food waste and to economically produce gas for energy.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.77-78
• /
• 2020

In Korea, more than 30,000 tons of waste Styrofoam are produced every year. Styrofoam is spent more than 500 years decomposing during the reclamation process, so it needs to be recycled. The recycling rate of waste styrofoam continues to be the third highest in the world, but it is lower than that of Germany and Japan. Therefore, measures are needed to increase the recycling rate of waste Styropol. Another problem is that cement is mainly used in existing lightweight foam concrete. However, large amounts of CO2 from cement-producing processes cause environmental pollution. Currently, Korea is increasing its greenhouse gas reduction targets to cope with energy depletion and climate change, and accelerating efforts to identify and implement reduction measures for each sector. In 2013 alone, about 600 million tons of carbon dioxide was generated in the cement industry. Therefore, this study replaces CO2 generation cement with furnace slag fine powder, uses crude steel cement for initial strength development of bubble concrete, and manufactures hardening materials to study its properties using waste styrofoam. As a result of the experiment, the hardening agent replaced by micro powder of furnace slag was less intense and more prone to absorption than cement using ordinary cement. Further experiments on the segmentation and strength replenishment of furnace slag are believed to contribute to the manufacture of environmentally friendly lightweight foam concrete.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.141-148
• /
• 2005

Pt/SDBC catalyst, which is used for the hydrogen-water isotopic exchange reaction, was prepared. The various properties of the catalyst, such as the thermal stability, pore structure and the platinum dispersion, were investigated. A hydrophobic Pt/SDBC catalyst which has been developed for the LPCE column of the WTRF (Wolsong Tritium Removal Facility) was tested in a trickle bed reactor. An experimental apparatus was built for the test of the catalyst at various temperatures and gas velocities.

• 한국지반공학회지:지반
• /
• 제11권3호
• /
• pp.139-162
• /
• 1995

WIPP에서 가스로 인한 파괴의 가능성을 해석적 계산과 수치해석 및 실내실첩을 통하여 연구하였다. 우선 본 연구와 관련된 화학반응식을 조사한 결과, 폐기물 내의 철이 산화하면서 다량의 가스가 발생될 수 있음을 알았다. 또한 간단한 지하수 흐름의 계산결과, 투수성이 높은 파쇄영역이 존재하지 않는 경우 이 가스량은 암염 내부와 약한 수평면에 인장균열을 초래하기에 충분히 높은 압력을 야기시킬 것이다. 해석적 계산은 선형탄성파괴역학의 개념을 사용하여 수행하였고, 수치해석은 유한요소법을 사용하여 행하였다. 또한 실내실험은 발생가능한 파괴 메카니즘을 설명하기 위하여 행하였다. 해석결과 약한 경석고층에서 수평으로 균열이 증가된 뒤에 그 균열은 이 층을 뜰고나가 암염 위쪽으로 계속 전폭되어 지표면 쪽의 수평방향과 53$^{\circ}$경사각을 갖고 지표면에 도달된다. 이와 같은 후자의 현상을 방지하기 위하여 경석고는 암염의 인성보다 0.5590배가 적은 파괴인성을 가져야 하는 것으로 나타났다. 실험결과 세 가지 형태의 균열(radial vertical cracks, horizontal circular cracks and cone -shaped cracks)이 관찰되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권4호
• /
• pp.533-540
• /
• 2006

In this study, the possibility of green tea waste (GTW) as a new ingredient of byproducts-mixed silage was investigated. Characteristics of GTW were low in dry matter (DM) content (20%), and high in crude protein (30 to 36%) and tannins (8.5%). The GTW was added to mixed silages composed of tofu cake, rice straw and rice bran that are locally available in Japan. In experiment 1, the effect of GTW addition to silage made from various patterns of byproducts mixture based on tofu cake was studied. In experiment 2, the effect of GTW addition and storage temperature on fermentation characteristics, nutrient contents and in vitro ruminal gas production of byproducts-mixed silages were examined. In experiment 1, GTW addition on tofu cake accelerated acetic, propionic and butyric acid accumulation in the silage. When rice straw was mixed with tofu cake, DM content was increased from 47 to 56%, lactic acid was the main acid and the pH was decreased below 4.2. In this case, GTW addition to those mixtures did not affect acid concentrations of the silage. In experiment 2, GTW addition to the byproducts mixture increased lactic acid concentration, decreased the pH and DM loss of the silages. In GTW treatments, tannin concentration was lower in the silage stored at $30^{\circ}C$ than $15^{\circ}C$. Addition of GTW into the silage also increased in vitro ruminal gas production. It was concluded that addition of GTW into byproducts-mixed silage enhanced lactic acid fermentation when there were insufficient materials for lactic acid production. Utilization of GTW as an ingredient in mixed silages would be effective in enhancing fermentation characteristics, lowering tannin content and in vitro ruminal gas production.