• 한국건축시공학회지
• /
• 제7권2호통권24호
• /
• pp.85-92
• /
• 2007

In the past, recycled aggregate was used very limitedly in low value-added areas such as the base layer of roads. However, in response to the shortage of natural aggregate, high consciousness of resource saving and changed idea on environment, the quality of recycled aggregate has been improved considerably, and the percentage of recycled construction waste is increasing every year compared to simple landfill or incineration. Recently the Act on the Promotion of Construction Waste Recycling was enacted on December 2003 for the efficient use of recycled aggregate, and the Standards for the Quality of Recycled Aggregate for Concrete (Proposal) were announced in order to use and manage recycled aggregate according to quality. According to the Standards for the Quality of Recycled Aggregate for Concrete (Proposal), it is recommended to substitute recycled coarse aggregate and fine aggregate below 30% each. However, compared to the trend of recycling, the recycling rate of aggregate is still quite low. It is because of low performance of recycled aggregate, users' lack of understanding, etc. These problems basically come from the decrease of strength of recycled concrete resulting from the use of recycled aggregate, and recycled aggregate is still considered not reliable because there have been not many cases of actual application. If the basic problem of strength decrease is solved and data on recycled aggregate is provided through actual field placing, we may maximize the use of recycled aggregate. Thus, in order to maximize the use of recycled aggregate that satisfy the recycled aggregate quality standards, the present study made a mock-up similar to real structures, evaluated its performance and examined the field applicability of recycled aggregate concrete.

• 한국농공학회논문집
• /
• 제47권4호
• /
• pp.25-32
• /
• 2005

This study was performed to evaluate the strength properties of polymer concrete using recycled aggre-gate. The compressive strength, splitting tensile strength, flexural strength and pulse velocity of polymer concrete were decreased with increasing the content of recycled aggregate. At the curing age of 7days, the compressive strength was $80.5\~88.3$ MPa, the splitting tensile strength was $9.1\~10.6$ MPa, the flexural strength was $19.2\~21.5$ MPa and the pulse velocity was $3,931\~4,041$ m/s, respectively. Also, the compressive strength, splitting tensile strength, flexural strength and pulse velocity of concrete using recycled fine aggregate were higher than that of the silica sand. Therefore, these recycled aggregate polymer concretes were estimated for high strength concrete without major problem.

• 한국건설순환자원학회논문집
• /
• 제9권3호
• /
• pp.253-259
• /
• 2021

플라스틱은 소비량 증가에 따라 생활계폐기물 중 폐플라스틱의 발생량도 급격히 증가하고 있으나, 분리, 선별 공정 비용 증가 등으로 재활용은 저조한 실정이다. 이에 본 연구는 생활계폐기물 발생 복합재질 폐플라스틱을 콘크리트용 골재로 재활용하기 위한 기초 연구로 고로슬래그 미분말을 충진한 복합재질 폐플라스틱 잔골재 및 굵은골재의 투입 비율 및 투입량이 콘크리트의 슬럼프 및 압축강도에 미치는 영향을 실험적으로 평가하였다. 복합재질 폐플라스틱 굵은골재는 부순 굵은골재 대비 조립률은 유사하나, 입자 크기가 작은 단입도 분포인 반면에, 복합재질 폐플라스틱 잔골재는 부순 잔골재 대비 조립률 및 입자 크기가 큰 단입도 분포인 것으로 나타났으며, 고로슬래그 미분말에 의한 밀도 및 공극 충진에 의한 흡수율 향상 효과는 복합재질 굵은골재 대비 복합재질 잔골재가 큰 것으로 나타났다. 복합재질 폐플라스틱 골재의 투입량이 증가할수록 콘크리트의 슬럼프와 압축강도는 감소하였다. 특히, 동일한 양의 복합재질 폐플라스틱 골재 투입 수준에서 복합재질 폐플라스틱 잔골재의 투입량이 많을수록 슬럼프와 압축강도는 작아지는 것으로 나타났으며, 이는 복합재질 폐플라스틱 잔골재 중 ROD 형상의 골재 하부에 공기가 갇히면서 형성된 공극에 의한 것으로 판단된다. 한편, 혼화제 투입 및 단위 시멘트량 증대는 복합재질 폐플라스틱 골재 투입 콘크리트의 압축강도 향상에는 효과가 있는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제28권4호
• /
• pp.445-454
• /
• 2016

노후 시설물의 증가에 따라 건설폐기물은 일정 수준까지 증가한 이후, 현재는 어느 정도 안정화 된 추세에 있지만, 전체폐기물 중에서 건설폐기물은 아직까지도 가장 큰 비중을 차지하고 있다. 또한, 천연 골재 채취 금지에 의한 골재 난 심화 및 골재 공급원 개발에 의한 국토훼손과 자연환경 파괴 등에 따라 환경복원에 막대한 국가예산 소요가 불가피한 상황이다. 이에 대한 대책 방안으로 국토교통부는 순환 골재 품질기준을 공포하여 순환 골재 품질에 따른 용도와 관리를 할 수 있도록 추진하고 있으나, 경제적 부가가치가 높은 용도로의 활용은 아직 저조한 실정이다. 따라서, 본 연구에서는 저자의 선행연구에서 제시한 탄산화 개질 조건인 $20^{\circ}C$, RH 60%, $CO_2$ 20%에서 순환 잔골재 4일, 순환 굵은 골재 14일간 탄산화를 실시한 순환 골재의 품질개선효과 및 이를 이용한 순환 골재 콘크리트의 성능 평가를 통하여 구조용 콘크리트로의 적용 가능성에 대한 실마리를 찾고자 한다. 그 결과, 탄산화 개질을 통하여 순환 잔골재의 흡수율이 0.91%, 순환 굵은 골재의 흡수율이 0.7% 저감되어 품질개선에 기여하였다. 또한, 탄산화 개질 골재를 이용한 순환 골재 콘크리트의 물리적 특성 및 내구성능이 일반 콘크리트와 유사한 결과를 나타내어 구조용 콘크리트로의 적용 가능성을 확인하였다.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.141-147
• /
• 2005

The development of automobile, vessel, rail road, and machine industry leads an increase of foundry production used as their components, which cause a by-product, waste foundry sand (WFS). The amount of the WFS produced in Korea is over 700,000 tons a year, but most WFS has been buried itself and only $5{\~}6\%$ WFS is recycled as construction materials. Therefore, it is necessary for most WFS to research other ways which can be used in a higher value added product. The study on recycling it as a fine aggregate for concrete or green sand has been in progress in America and Japan since 1970s and 1980s respaectively. In this study, two types of WFS were used as a fine aggregate for concrete. Nine types of concrete aimed at the specified strength of 30 MPa were mixed with washed seashore coarse sand in which salt was removed, and WFS and then appropriate mixture proportion of concrete was determined. Moreover, basic properties such as air contents, setting time, bleeding, workability and slump loss of the fresh concrete with WFS were tested and compared with those of the concrete mixed without WFS. In addition, both compressive strength of hardened concrete at each ages and tensile strength of it at the age of 28 days were measured and discussed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.138-143
• /
• 2000

In this paper, we carried out experiment to use crushed waste glass as a fine aggregate. This study delt with the comparative analysis on the construction works and engineering properties of concrete containing crushed waste glass through physical experiment. The experimental variables are crushed waste glass substitution ratio and W/C(38, 53%). When the W/C was 38%, we could know that concrete containing crushed waste glass was good as general concrete on the construction works and engineering properties but the concrete containing crushed waste glass applied W/C 53% was not good as general concrete on those. Therefore, concrete containing crushed waste glass applied W/C 53% should use admixture on the site.

• Advances in concrete construction
• /
• 제10권2호
• /
• pp.127-140
• /
• 2020

This study explores the feasibility of granite waste aggregate (GWA) as a partial replacement of natural fine aggregate (NFA) in binary blend self-compacting concrete (SCC) prepared with fly ash. Total of nine SCC mixtures were prepared wherein one was Ordinary Portland cement (OPC) based control SCC mixture and remaining were fly ash based binary blend SCC mixtures which included the various percentages of GWA. Fresh properties tests such as slump flow, T₅₀₀, V-funnel, J-ring, L-box, U-box, segregation resistance, bleeding, fresh density, and loss of slump flow (with time) were conducted. Compressive strength and percentage of permeable voids were evaluated in the hardened state. All the SCC mixtures exhibited sufficient flowability, passing ability, and resistance to segregation. Besides, all the binary blend SCC mixtures exhibited lower fresh density and bleeding, and better residual slump (up to 50% of GWA) compared to the OPC based control SCC mixture. Binary blend SCC mixture incorporating up to 40% GWA provided higher compressive strength than binary blend control SCC mixture. The findings of this study encourage the utilization of GWA in the development of binary blend SCC mixtures with satisfactory workability characteristics as a replacement of NFA.

• 공업화학
• /
• 제16권3호
• /
• pp.317-322
• /
• 2005

오늘날 대규모 건설사업에 따른 골재의 고갈과 환경보호 측면에서 폐콘크리트 골재의 재활용이 절실히 요구되고 있다. 본 연구에서는 페콘크리트의 분쇄공정에서 발생되는 페콘크리트 미분말을 폴리머 모르타르의 충전재 대용으로 재활용하고자 하였다. 폴리머 모르타르의 공시체는 폴리머 결합재의 첨가율을 9~15 wt%, 실리카 미분말 충전재 대용의 폐콘크리트 미분말 치환율을 0~20 wt%, 0.1~0.3 mm 잔골재(21~24 wt%)와 0.7~1.2 mm 잔골재(44~47 wt%)의 첨가율을 65~71 wt% 범위로 다양하게 변화시켜 제조하였다. 폴리머 모르타르의 물성을 평가하기 위하여 압축 및 휨강도, 흡수율, 내열수성, 내산성, 세공분포특성, 전자현미경에 의한 미세조직 관찰시험을 행하였다. 시험결과, 폴리머 모르타르의 물성은 폴리머 결합재의 첨가율 증가에 따라 현저히 증가되었으나 페콘크리트 미분말의 치환율 증가에 따라서는 크게 저하되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.52-57
• /
• 1999

The aimed of this study is to analyze the qualities of foundry waste sand and the basic physic of the concrete mixed with the foundry waste sand, as a way of study for reusing the foundry waste sand disused in the foundry as the fine aggregate for concrete. According to the experimental results, the foundry waste sand is composed of silica ore whose main ingredient is SiO2 and doesn't produce harmful objects of hydration reaction, and the fluidity of concrete shows a decline with the increase of replacement ratio of foundry waste sand, and the compress strength, the tensile strength, the elastic modulus of concrete containing foundry waste sand are improved at the replacement rate of 25%.

• 한국농공학회지
• /
• 제43권2호
• /
• pp.132-139
• /
• 2001

This study deals with coal-mine waste (CMW) for use in concrete as a replacement of normal aggregates. The CMW was collected from Sabuk region. Ganwon-do. Fine and coarse aggregates from CMW were prepared by using a crusher and separating debris with #4 sieve. CMW aggregates showed good physical and mechanical properties with having specific gravity over 2.65, absorption less than 1%, and abrasion ratio below 20%. However, particle shape of CMW was poor because of non-isotropic nature of matrix which cause particles to be long or flat. Since irregular particles caused a poor workability, to make workability better, a 1/4 of coarse aggregate was replaced with normal aggregate together with a superplasticizer. Compressive strength and other mechanical properties of CMW concrete were very good. Color of the concrete was darker than normal concrete due to black color of CMW. In conclusion, characteristics of CMW concrete was acceptable for use as a structural concrete material.