• Computers and Concrete
• /
• 제17권2호
• /
• pp.255-269
• /
• 2016

The waste glass sludge is a waste produced in the glass industry. It is in a dust form and disposed with water. In the disposal process, various cohesive agents are incorporated in order to precipitate the glass particles efficiently. In this paper, we investigate the pozzolanic reaction of the waste glass sludge incorporating precipitation additives experimentally. The consumption of calcium hydroxide, the setting time and the compressive strength and the pore structure were tested for two different types of the waste glass sludge depending on whether precipitation additives were used. It was found that the waste glass sludge incorporating the precipitation additives had a higher pozzolanic potential than the reference waste glass sludge without precipitation additives.

• 한국환경과학회지
• /
• 제14권7호
• /
• pp.691-697
• /
• 2005

Waste sludge may be used to recovery wastewater contaminated with heavy metals. The waste sludge is an inexpensive readily available source of biomass for biosorption with metal-bearing wastewater. The biosorption of heavy metals such as Pb(II), Cu(II), Cr(II), and Cd(II) onto waste sludge was investigated in batch ex­periments and waste sludge loaded heavy metals was separated by dissolved air flotation. The biosorption equi­bria of heavy metals could be described by Langmuir and Freundich isotherms. The adsorption capacity for waste sludge was in the sequence of Pb(II)>Cr(II)>Cu(II)>Cd(II). The system attained equilibrium about 20 min. The Langmuir and Freundlich adsorption model effectively described the biosorption equilibrium of Cu(II) and Cr(II) ions on waste sludge. Maximum adsorption capacity of Cu(II) and Cr(II) were 196.08 and 158.73 mg/g, respectively. Solid-liquid separation efficiencies were kept above $95\%$ on waste sludge loaded heavy metals, and were decreased with pH increasing.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.555-559
• /
• 2001

A by-product, waste sludge water produced from ready mixed concrete(remicon) factories may affect our environmental contamination if it is discharged without proper waste disposal. In Korea, all waste sludge water has been recycled in the way of mixing water of remicon, but the quality of the concrete then produced can be deteriorated, so it might cause slump loss or irregular compressive strength. In this study, waste sludge water is divided into two parts, remicon sludge and residual water in order to make it's property more stable. Then, the remicon sludge and high-alkaline residual water were used as admixture and alkali activator respectively. In this paper we research about quality of with remicon sludge and residual water and performed the fundamental properties of cement matrix mixed with remicon sludge and residual water.

• Ocean Science Journal
• /
• 제40권2호
• /
• pp.91-100
• /
• 2005

Bioassay using the marine bacteria, Vibrio fischeri and rotifer, Brachionus plicatilis, and chemical analyses were conducted to assess the toxicity of the various sewage sludges, one of the major ocean dumped materials in the Yellow Sea of Korea. Sludge elutriates extracted by filtered seawater were used to estimate the ecotoxicity of the sludge. Chemical characterization included the analyses of organic contents, heavy metals, and persistent organic pollutants in sludge. Bacterial bioluminescent inhibition (15 min), rotifer mortality (24 hr) and rotifer population growth inhibition (48 hr) assay were conducted to estimate the sludge toxicity. EC50 15 min (inhibition concentration of bioluminescence after 15 minutes exposed) values by Microtox(R) bioassay clearly revealed different toxicity levels depending on the sludge sources. Highest toxicity for the bacteria was found with the sludge extract from dyeing waste and followed by industrial waste, livestock waste, and leather processing waste. Clear toxic effects on the bacteria were not found in the sludge extract from filtration bed sludge and rural sewage sludge. Consistent with Microtox(R) results, rotifer neonate mortality and population growth inhibition test also showed highest toxicity in dyeing waste and low in filtration bed and rural sewage sludge. High concentrations of persistent organic pollutants (POPs) and heavy metals were measured in the samples from the industrial wastes, leather processing plant waste sludge, and urban sewage sludge. However, there was no significant correlation between pollutant concentration levels and the toxicity values of the sludge. This suggests that the ecotoxicity in addition to the chemical analyses of various sludge samples must be estimated before release of potential harmful waste in the natural environment as part of an ecological risk assessment.

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.465-479
• /
• 2020

Two waste forms, namely cement and geopolymer, were investigated and tested in this study to solidify the corrosive sludge generated from the surface and precipitates of the tubes of steam generators in nuclear power plants. The compressive strength of the cement waste form cured for 28 days was inversely proportional to waste loading (24.4 MPa for 0wt% to 2.7 MPa for 60wt%). The corrosive sludge absorbed the free water in the hydration reaction to decrease the cementation reaction. When the corrosive sludge waste loading increased to 60wt%, the cement waste form showed decreased compressive strength (2.7 MPa), which did not satisfy the acceptance criteria of the repository (3.45 MPa). Meanwhile, the compressive strength of the geopolymer waste form cured for 7 days was proportional to waste loading (23.6 MPa for 0wt% to 31.9 MPa for 40wt%). The corrosive sludge absorbed the free water in the geopolymer when the water content decreased, such that a compact geopolymer structure could be obtained. Consequently, the geopolymer waste forms generally showed higher compressive strengths than cement waste forms.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.160-161
• /
• 2015

This research reviewed the characteristics of waste concrete sludge occurred from recycled aggregate producing process and the physical and mechanical properties of the mortar incorporated the pulverized the waste concrete sludge. From the results of the experiment, as the replacement ratio of waste concrete sludge powder was increased, the dosage of superplasticizer to satisfy the target flow of 200 ± 10 was increased, and the compressive and flexural strengths were decreased. On the other hand, when the sludge powder replacement ratio was 25 %, outstanding performance of general characteristics of mortar was obtained while it was lower than Plain mixture, thus, further detail study on various replacement ratios of waste concrete sludge powder is needed.

• 생명과학회지
• /
• 제33권1호
• /
• pp.82-90
• /
• 2023

하수와 산업폐수를 처리하는데 생물학적 공정이 전세계적으로 이용된다. 생물학적 공정은 복합미생물로 구성된 슬러지를 사용한다. 슬러지 미생물이 성장함에 따라 폐수처리공정에서는 잉여슬러지가 발생한다. 잉여슬러지의 일부는 미생물을 보충하기 위해 폐수처리공정에 반송되지만 나머지는 폐기물로서 처리된다. 매년 전세계적으로 폐수발생이 증가함에 따라 폐수처리장의 수도 증가하여 많은 양의 폐슬러지가 생산된다. 따라서 폐슬러지에 대한 관리와 처리가 중요하다. 폐슬러지 처리비용은 폐수처리장 총운영비의 50-60%를 차지한다고 보고되었다. 슬러지 분해기술은 폐슬러지의 부피를 최소화하고 유용한 성분(예, P, N, 용해성 유기물)을 회수할 수 있는 새로운 기술이다. 물리적, 화학적, 그리고 생물학적 처리 또는 복합 처리에 기반을 둔 다양한 슬러지분해방법들이 개발되었다. 본 총설은 슬러지 분해방법들 중에서 비교적 덜 연구된 산 가수분해에 의한 슬러지 분해에 대해 중점적으로 다루었다. 본 총설에서 다룬 정보는 폐슬러지 처리를 위한 더 나은 기술을 개발하고 이식하는데 유용하게 사용될 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.7-12
• /
• 1998

The waste sludge is by-produced about 20-30% of total production and arised to the severe problems of this mine's surrounding environmnet. This study was invested the composition of component, particle of size of the waste sludge by Chemical Analysis, X, R, D, Particle Size Analyzer and the physical properties (air content, slump, strength, etc) of concrete when the waste sludge is added into concrete. so, It's recomended the proper content of the waste sludge to be added into concrete. and then, is verified to be applied at batch plant in field. Above the results, the recomeded content of the waste sludge is about 2-4% (about 4-8% in cement) in aggregates and when it's added the recomended content, they are detected to be more or less changed the physical properties of concrete, ( equally strength and durability, little less air con tent, little increased shinkage, etc). but the application of the recomended content don't arise the problem of the basic quality control of concrete and physical properties.

• 한국물환경학회지
• /
• 제31권5호
• /
• pp.476-481
• /
• 2015

Water permeable block was manufactured using waste sewage sludge, loess and clay for the purpose of recycling waste sludge due to the prohibition of waste sludge ocean dumping. Experiments for determining optimum mixing ratio was conducted by changing sludge content in water permeable block as 5~20%. In respect of compressive strength, $1,600N/cm^2$ ($163.3kg/cm^2$) was obtained when the mixing ratio of sludge : loess : clay were maintained by 5% : 65% : 30%, 10% : 65% : 25% and 15% : 65% : 20%, respectively. These mean that relatively high compressive strength can be obtained when the sludge content is maintained 5, 10, 15% at the 65% of loess content. In terms of water permeability and absorption rate, the higher values can be obtained as the sludge content increases. The optimum mixing ratio of sludge : loess : clay came out to be 15% : 65% : 20% when water permeability, absorption and strength were considered altogether, which matches the result observed by an electron microscope. The heavy metal leaching test result of the prepared permeable block appeared to satisfy the environmental standard in the content of Cd, Cu, Pb and As.

• Advances in environmental research
• /
• 제9권4호
• /
• pp.285-294
• /
• 2020

Growth of any country rest in the consumption of industrial wastes for its infrastructure amenities. Countries like India positively desires a vital utilization of industrial waste resembling paper sludge in the construction industry to make various building materials. Also, it is the duty of all civil engineers or researchers to attach them in mounting new materials from the waste dumped as land fillings. In every construction project, about 70% of cost accounts for the procurement of materials. If this, can be minimized consequently the cost of construction will certainly be condensed. Research has established that the waste paper sludge can be reused in the construction field for a probable scope. The construction diligences munch through a massive quantity of non-renewable resources. On the additional dispense, more waste paper board sludge ends up in landfills or dumpsites than those recycled. Consequently, waste paper sludge for use as a construction material composes a step towards sustainable development. Keeping this in mind an endeavor has been made to utilize paper board sludge acquired from the paper board industry and used with several pozzolanic and cementitious materials for a specific purpose. The addition of paper sludge has been varied from 0% to 20% by weight of cement. The tests done with the samples expose that four samples showed significant outcomes with remarkable strength and durability properties which guide to move for the next phase of research for producing lightweight tiles.