• Resources Recycling
• /
• v.22 no.6
• /
• pp.33-40
• /
• 2013

Due to the environmental problem caused by plastics largely used in various fields, the importance of recycling is being emphasized. A research on material separation of ABS and PS mixed plastic waste, using a triboelectrostatic separator, was carried out for recovery the ABS. As a results of research on charging characteristic for choosing charging material, it was confirmed that ABS was optimum charging material for a tribo-charger in the material separation of ABS and PS. In the material separation using ABS charger, ABS grade of 99.5% and recovery of 92.5% were achieved at 20 kV, splitter position +2 cm from the center and 30% relative humidity. Therefore, material separation technique for recycling ABS and PS mixed plastic waste was established.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.09a
• /
• pp.3-12
• /
• 2006

The main feature of these total technologies is that we can constitute the optimum treatment scheme fitting to the property of wastes, amount of wastes and energy requirement. For high moisture content wastes or biomass resources, high pressure steam process (MMCS) for crush, dry and deodorize wastes to produce high quality fertilizer of fuel is most appropriate. For dry or semi-dry solid wastes, the STAR-MEET system can be applied to produce low-BTU gases for power generation using duel fueled diesel engines of Stirling engines, and the REPRES and HyPR-MEET systems can be applied to produce hydrogen rich medium-BTU gas. For waste plastics and oils, liquefaction technology is best fit to produce light oil or kerosene equivalent fuel oils. These total technologies are completely different from the existent waste treatment technologies based on land-filling or incineration, and are expected to disseminate all over the world in the near future.

• Resources Recycling
• /
• v.16 no.5
• /
• pp.71-76
• /
• 2007

The mixed plastic waste generated from households after hand-picking and/or mechanical sorting processes amounts to 1,750,000 ton in 2006, and most of these waste are finally end up with landfill and/or incineration due to the lacks of separation technologies and economical reasons. The mixed plastic wastes can not be used as raw materials for chemical and/or thermal recycling processes because of their high content of PVC(upto 4.0 wt.%). In the present research, gravity separation system has been developed to remove PVC from the mixed plastic waste and to recover the PO-type plastics. This system mainly consists of air classification, magnetic separation, one-step crushing, feeding system at fixed rate and wet-type gravity separation system. The gravity system based on centrifugal separation has been developed at capacity of 0.5 ton/h and it consists of mixing, precleaning, separation, dewatering, recovery system and wastewater treatment system, etc. The main objective of this process is to achieve high separation efficiency of polyolefins with less than 0.3 wt.% PVC content and less than 10% moisture content in the final products. In addition, a crushing unit of with 8 rotor system is also developed to improve the crushing efficiency of soft-type plastics. The system with a capacity of 1.0 ton/h is developed and operational results are presented.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.102-107
• /
• 2017

To estimate the bulk density applying the composition rate for recyclable residential waste, the composition rates by volume and weight basis, the bulk densities of the separated and commingled wastes were investigated four times respectively for recyclable waste of 1,800 kg transported to waste recovery facility. The bulk densities for separated wastes were $379.0kg/m^3$ of glass bottles that is highest and metals, residues, others, cans, plastics in order. The composition rates for each separated waste were changed widely depending on either volume basis or weight basis. The composition rate by weight basis as 40.6% of the glass bottles, 32.6% of the plastics were changed to 60.2% of the plastics and 8.9% of the glass bottles in that by volume basis. The bulk density of the commingled wastes applying the composition rate by volume basis showed the similar value to the measured density than by weight basis. So it was estimated that the composition rate by volume basis was appropriate for determining the bulk density of the commingled recyclable wastes.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.16-22
• /
• 1998

Recently, the new technology for the recycling of waste plastics as an alternative he1 of blast furnace ha been developed. In this shldy, the test of plastics injection into a tuyere af the foundry blast furnace were carried out. The injection rate of plastics far this tcst facility war expressed as follows, ${W}_{s}=0.265\frac{{delta}PA}{U}_{g}$, where. Ws, AP, A and Ug are plastic conveying ratc (kgisec), pressure drop between feed hopper and blaqt pressure (alm), cross sectional area of conveying pipe (mi) and superficial velocity of transport air (mhzc) respcctiuely. From the results of semi-continuous test operation during 96 hours, the replacement raho mned out to be 1.38 according to the injection rate of 6. 4 kg-plasticsit-p. With increasing the rate of plaslics injcchon, the content of hydrogen in top gas became increased and the brick temperahlre at bzlly was also increased due to Lhe changes ot the combustion zone shape.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.17-24
• /
• 2016

This study aims at evaluating environmental impacts on recycling process of used small household appliances. The recycling process mainly consists of manual dismantling, crushing and various sorting processes to effectively recover valuable resources and to minimize environmental impact. In this study, life-cycle assessment (LCA) methodology is applied to analyze major environmental parameters such as GWP, ADP, POCP, EP, etc. One of the major impact categories on the weight basis in the recycling process is global warming (GWP) 57.1%, next to ADP 35.4% and POCP 4.8%, respectively. As a result of environmental impact on recovery of valuable resources/ton, the GWP of plastics for ABS is highest (33.7%) compared to ferrous metals (9.4%). The effects of environmental and economical benefit are also analyzed to compare with the amount of virgin materials to be recycled by recycled materials. In addition, recycled materials are also more economical in comparison to virgin materials due to the environmental avoiding effect by recycling. In conclusion, the key environmental issues related to the recycling of e-wastes are analyzed and therefore, the effective recycling process will contribute to mitigate global warming potential in the near future.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.88-97
• /
• 2020

In this study, the selected waste plastic waste logistics used for cement sintering were classified into two types through the process of sorting and crushing, analyzing the characteristics of each, and analyzing the correlation of the strength after cement manufacturing. The experimental variables were classified into soft and hard waste plastic waste, and the correlations between calorific value, chlorine, and moisture were analyzed. In addition, some of each waste was selected and melted, and the basic characteristics were evaluated by analyzing the structure and calorific value. The results of the experiment showed that it was evaluated that it is suitable to obtain a heat source by separating soft waste plastic wastes and sintering them with materials having similar properties. As a result of examining the wastes by strength after cement manufacturing, it was analyzed that the use of hard plastics greatly contributes to the compressive strength on the 1st and 28th, and the use of soft plastics contributes to the compressive strength on the 28th. However, these characteristics are evaluated by collecting only a part of the waste, and since the deviation of the waste occurs, continuous management is required, and a follow-up study on the environmental problems caused by the use of waste is required.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.68-79
• /
• 2014

Since 1990s, efforts to recycle the waste plastics by chemical methods have increased. And in accordance with this trend, attempts have become active to use the waste PET as raw materials of chemical industries. In this article, the patents and papers for development of commercial technology for feedstock recycling and high end products from PET wastes were collected and analyzed. The open patents of USA (US), European Union (EP), Japan (JP), and Korea (KR) and SCI journals from 1974 to 2013 were investigated. The patents and papers were collected using key-words and filtered by the definition of the technology. The patents and papers were analyzed by the years, countries, companies, and technologies and the technical trends were discussed in this paper.

• Resources Recycling
• /
• v.21 no.3
• /
• pp.56-64
• /
• 2012

It is generally well known that PCB (Printed Circuit Board) is an electric component assembled by various metals mixed with plastics and ceramics. Accordingly, it is very important to extract metallic components from used PCBs from the point of view of recycling of used resources as well as an environmental protection. In this paper, patents and paper on the recycling technologies of PCB were analyzed. The range of search was limited in the open patents of USA (US), European Union (EP), Japan (JP), Korea (KR) and SCI journals from 1980 to 2011. Patents and journals were collected using key-words searching and filtered by filtering criteria. The trends of the patents and journals was analyzed by the years, countries, companies, and technologies.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.1
• /
• pp.39-45
• /
• 2008

As a waste management tool, the prohibition of landfilling of food waste has enforced since 2005. the composition of municipal solid waste (MSW) has changed dramatically. In this study, MSW generated from a small city collected once a year in 2004, 2005 and 2007, to qualify the characteristics of MSW before and after implementation of the tool. The prohibition of landfilling of food waste dramatically reduces food waste in MSW to 5.5 weight %, and on the other hand results to increase papers to 50.6 % and plastics to 22.6 %, The bulk density lowers to 50 %, which newly propose the necessity of volume reduction and incineration of MSW to ensure efficient transport and disposal. As water content of MSW reduces to 15.9 %, lower heat value of MSW after prohibition of landfilling of food waste increase to 3565.6 kcal/kg. Mitigation of bad smell and waste leachate with lower contaminants are recommendable as a kind of positive effects benefited by the tool.