• 한국지리정보학회지
• /
• 제1권2호
• /
• pp.14-25
• /
• 1998

본 연구는 일반폐기물 매립지의 입지인자들의 상대적 중요도에 입각하여 매립후보지를 선정함으로서 합리적인 폐기물 매립지의 입지선정의 이론적, 실천적 토대를 제공하는 것을 목적으로 한다. 일반폐기물의 입지인자 및 그 입지 기준의 선정은 기존문헌의 고찰을 통해 이루어졌으며, 입지인자들간의 상대적 중요도 평가는 비율적 층화추출방법으로 선정된 전문가집단을 대상으로 한 계층분석방법(Analytic Hierarchy Process : AHP)을 적용하였다. 사례지역은 심각한 매립지의 부족과 평탄한 지형적 특성으로 인하여 입지선정에 어려움을 겪고 있는 경상북도 경산시를 대상으로 하였다. IDRISI V2.002를 사용하여 하나의 지리정보체계를 구축하고 경사, 토양, 인구 등 17개의 주제도면을 생성하였으며, 토지적합성분석은 선형조합법과 요소조합법을 동시에 적용하여 두 방법이 가진 방법상의 문제점을 보완하여 합리적인 일반폐기물 매립후보지 선정의 이론적, 실천적 바탕을 제시하였다.

• 환경영향평가
• /
• 제6권2호
• /
• pp.123-135
• /
• 1997

The solid waste incineration facilities which cause environmental pollution. And those are some kind of loathing facilities for residents who do not want it. This problem could be solved by location feasibility study. The purpose of location feasibility study was to determine one site out of three candidate sites. This study which was done by the law, environmental and economic factor was considered for optimum site selection. Comparative evaluation among the candidate sites was done by ordinal scale and thus the optimum site was selected.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 봄 학술발표회 논문집
• /
• pp.59-64
• /
• 1994

In order to democractically resolve the "not-in-my-backyard" (Nimby syndrome) which is widespread in Korea, the policy of the Ministry of Environmnt(MOE) is that the MOE is willing to negotiate with local inhabitants who refuse to allow the establishment of waste treatment facilities, and that such facilities will be safety and effectively constructed and managed. According to this policy, the MOE has developed a basic plan to construct 255 incinerators by the year 2001, and establish 42 sanitary landfill sites and 5 specific waste treatment facilities in 1994.s in 1994.

• Environmental Engineering Research
• /
• 제12권2호
• /
• pp.46-54
• /
• 2007

Concentrations of the principal volatile organic compounds, such as benzene, toluene, ethylbenzene, m,p,o-xylene, styrene, and chlorobenzene were measured at the solid waste treatment plants classified into four categories; municipal waste incinerator, municipal waste landfill site, industrial waste incinerator and industrial waste landfill site. The average concentration of VOCs in industrial waste treatment facilities was 33.43 ppb and was significantly higher than that measured at municipal waste treatment facilities (4.71 ppb). The average toluene concentrations measured at incinerators (13.05 ppb) were a little higher than those measured at landfill sites (11.54 ppb). The contribution of the waste treatment facilities to the concentration of benzene (0.35 ppb) and o-xylene (0.15 ppb) in the industrial area was relatively small. However, toluene measured in the industrial waste treatment facilities was the most abundant VOCs with the average concentration of 21.37 ppb. As a result of analyses of fingerprint, in cases of IISH and ILUS, a variety of compounds other than major VOCs were detected in high level. On the Pearson correlation analysis, the correlation was generally positive and some pairs of these VOCs were very strongly correlated (correlation coefficient > 0.75).

• 유통과학연구
• /
• 제18권9호
• /
• pp.67-75
• /
• 2020

Purpose: The purpose of this study is to enhance sales promotion efficiency for using solid refuse fuel facilities. Renewable energy technology using Solid Refuse Fuel (SRF) is an economic efficiency technology that recovers waste by burning various wastes. A survey on the pollutants discharged from the solid fuels facilities was investigated so that the SRF facilities could be expanded, distributed and reflected in the policy. Research design, data, and methodology: In this study, 9 business sites using SRF and Bio-SRF as main raw materials were investigated for 2 years. The characteristics of target business sites such as the type of fuel used, combustion method, combustion temperature, daily fuel consumption and environmental prevention facilities were studied. Results: The average pollution & ammonia concentration of Bio-SRF facilities was found to be 88.15% higher than that of SRF facilities. But the average acetaldehyde concentration of SRF facilities was found to be 88.15% higher than that of Bio-SRF facilities. Conclusions: The main issue is how much electric power generation using combustible materials affects air pollution. The waste recycling law provides the standard value according to the fuel property, but there is a considerable gap with the mixed fuel. Therefore, for efficient utilization of facilities using solid fuel products, additional research is needed to improve the distribution structure of exhaust pollutants is needed.

• 한국측량학회지
• /
• 제16권1호
• /
• pp.59-66
• /
• 1998

생활 수준의 향상으로 환경의 질에 대한 주민들의 관심이 높아짐에 따라 쓰레기 매립지와 같은 환경 혐오시설의 부지 선정 문제가 사회 문제로 대두되고 있다. 따라서 본 연구에서는 다량의 환경학적 정보를 저장, 관리, 분석, 표시할 수 있는 GSIS와 의사 결정 과정에서 사용될 수 있는 AHP를 이용하여 쓰레기 매립지를 평가하는 방법을 연구하고자 한다. AHP는 관계 집단들의 의견을 적절히 반영시킬 수 있는 유연성을 가지고 있기 때문에 GSIS와 연관시켜 사용하면 환경 혐오시설의 부지 선정 문제에 매우 유용하리라 생각된다.

• 방사성폐기물학회지
• /
• 제19권4호
• /
• pp.533-546
• /
• 2021

Large earthquakes with (M_W > ~ 6) result in ground shaking, surface ruptures, and permanent deformation with displacement. The earthquakes would damage important facilities and infrastructure such as large industrial establishments, nuclear power plants, and waste disposal sites. In particular, earthquake ruptures associated with large earthquakes can affect geological and engineered barriers such as deep geological repositories that are used for storing hazardous radioactive wastes. Earthquake-driven faults and surface ruptures exhibit various fault zone structural characteristics such as direction of earthquake propagation and rupture and asymmetric displacement patterns. Therefore, estimating the respect distances and hazardous areas has been challenging. We propose that considering multiple parameters, such as fault types, distribution, scale, activity, linkage patterns, damage zones, and respect distances, enable accurate identification of the sites for deep geological repositories and important facilities. This information would enable earthquake hazard assessment and lower earthquake-resulted hazards in potential earthquake-prone areas.

• 방사성폐기물학회지
• /
• 제6권3호
• /
• pp.205-215
• /
• 2008

방사성폐기물 처분시설에 대한 운영 전, 운영 중 및 폐쇄 후 단계에서의 부지환경자료의 지속적 수집 및 관리를 목적으로 한 체계적인 데이터베이스와 전산분석 시스템 구축의 필요성에 의하여 부지환경종합관리시스템(SITES: Site Information and Total Environmental Data Management System)을 개발하였다. 본 시스템은 부지환경 자료관리 및 안전성 재평가에 활용 할 수 있는 통합적인 시스템으로서 부지환경데이터관리시스템(SECURE), 통합안전성평가시스템(SAINT), 부지환경감시시스템(SUDAL), 그리고 SITES지리정보시스템(SITES-GIS)의 4개의 모듈로 구성되어 있다. 각 모듈은 자체 데이터베이스를 통해 자료의 검색, 저장 및 보고서 작성 기능을 가지고 있으며, 부지환경자료를 통합안전성평가시스템에서 직접이용 가능토록 되어 있다. 통합안전성평가시스템은 다수의 평가자가 동시에 이용가능하며, 대상 부지별 안전성평가 결과의 품질보증 체제가 확보되어 있다. 부지환경감시시스템은 평가 예측자료와 환경감시 자료와의 비교분석 및 시각화가 가능하며, 또한 일반인을 위한 주기적 환경감시 자료를 인터넷 홈페이지와 연계하여 공개 가능토록 되어 있다. 부지환경종합관리시스템은 현재 중 저준위 방사성폐기물 처분을 위한 월성원자력환경관리센터에 적용되고 있으며, 원자력관계시설 및 기타 유해환경 산업시설에 대한 부지 및 환경 감시기능의 수준을 고도화하는 데에 기여할 수 있을 것으로 기대된다.

• 한국농촌건축학회논문집
• /
• 제26권2호
• /
• pp.65-72
• /
• 2024

In order to analyze the impact of fine dust generated from a construction waste intermediate processing site on the surrounding areas, diverse types of samples were collected from inside the site and surrounding areas. The impact analysis results of samples are as follows. (1) Compared to the air quality management standards by the Ministry of Environment, the concentration of fine dust within the site was 30 to 46% for PM10 and 14 to 42% for PM2.5, which was not much different from the general air quality level. (2) It was found that PM10 within the site may have a partial effect on the air quality, but when the blocking facilities in the site, wheel washing facilities at vehicle entry and exit route, and sprinkler during working were maintained, the impact on the nearby area was not high. (3) In the case of PM2.5, its concentration was influenced more by the exhaust fumes from work vehicles than fine dust generated during construction waste processing. Since the PM2.5 concentrations in the site and surrounding area were not much different from the general air quality, there was little correlation with the work impact of construction waste intermediate processing sites. (4) Pb, an indicator of heavy metal components, was within 50ng/m³ in all three sites, which was 10% of the domestic management standard and equivalent to the general air quality level. The complaints from residents in nearby areas were filed using indicators based on visual and experiential information in their daily lives, so even if the survey results of environmental impact by the construction intermediate waste processing site are lower than the standard, nearby residents can feel it better than such numerical information. Therefore, specific activities to reduce find dusts should be continuously continued.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권3호
• /
• pp.93-108
• /
• 2013

This study is aimed to prepare the effective detail survey methods(Phase II) of abandoned metal mines through the contamination assessment for mine types and facilities in the abandoned metal mine areas. The study sites of 12 abandoned mines are located in Gyeonggi-do and Gangwon-do and those were chosen among 310 sites that the Phase II survey was conducted from 2007 to 2009 after considering the results of Phase I for abandoned mines scattered all over the country. 12 study sites were classified into four types; Type I sites only have pit mouth. Type II sites have pit mouth and mine-waste field. Type III sites have pit mouth and tailing sorting field. Type IV sites have pit mouth, tailing sorting field and concentrator(s). In forest land, paddy soil and farm land of Type I, As and Cd were showed average concentration, and Cu and Pb were high on the pit mouth area in one mines where the pit mouth was developed within 500 m. In the mines of Type II, Cu and Pb were showed average concentration too, but As and Cd were slightly high in pit mouth and mine-waste field. The mines of Type III which had grinding particle process through physical separation milling or hitting showed similar tendency with Type II. However, mines of Type IV pit mouth, mine-waste field and showed various results depending on defining the contamination sources. For example, if contamination source was pit mouth, the mixed results of Type I, II, II were showed. In tailing sorting field which was regarded as the most important source and having high mobility, however, if there were no facilities or it was difficult to access directly, field sampling was missed occasionally during phase I and phase II survey. For that reason, the assessment for tailing sorting field is missed and it leads to completely different results. In the areas of Type I mines, the concentration of heavy metals exceeded precautionary standards of soil contamination or not within 1,000 meters of pit mouth. Nickel(Ni) was the largest factor of the heavy metal contamination in this type. The heavy metals except Arsenic(As) were shown high levels of concentration in Type II areas, where pit mouth and mine-waste field were operated for making powder in upriver region; therefore, to the areas in the vicinity of midstream and downstream, the high content of heavy metals were shown. The tendency of high level of heavy metals and toxic materials contained in flotation agent used during sorting process were found in soil around sorting and tailing field. In the abandoned-pit-mouth area, drygrinding area and tailing sorting field area, the content of Cupper(Cu) and Zinc(Zn) were higher than other areas. Also, the contaminated area were larger than mine reclamation area(2,000 m) and the location of tailing sorting field was one of the important factors to estimate contaminated area.