• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.24-24
• /
• 2001

• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.69-76
• /
• 1976

This experiment has been carried out for the removal of long-lived radioactive-nuclides (Sr-90, Ru-106, Cs-137 and Ce-144) contained in the low-level radioactive effluents from the spent fuel reprocessing plant and nuclear power plant, in order to determine the decontaminability of various chemical coagulants and domestic clay mineral (montmorillonite). Phosphate process showed prominent efficiency for the removal of Ce-144, and lime-soda process did good removal efficiency for Sr-90. About Cs-137 copper-ferrocyanide process is much desirable. In phosphate or lime-soda process, most favorable removal efficiency was obtained at more than pH 11. The montmorillonite treated with sodium chloride showed a considerable improvement in the removal of the radioactive-nuclides. By a combined chemicals-montmorillionite process, the radioactive-nuclides could be more effectively removed than by the only chemicals process.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.64-68
• /
• 2011

The typical properties of manganese nodules are its high porosity and high specific surface area and manganese in nodules is existed as ${\delta}$-MnO$_2$. These properties suggest that manganese nodules ran be used as an adsorbent for heavy metal ions. This study investigated the practical applicability for the removal of copper ions in the waste water by manganese nodules as an adsorbent using fixed column and fix bed systems. Manganese nodules of 1kg (size 1-3 cm) can absorb 4.0g Cu in fixed column system and 2.3g Cu in fixed bed system from waste water for 3 hours respectively.

• Membrane and Water Treatment
• /
• v.6 no.2
• /
• pp.103-112
• /
• 2015

In India, recycling of treated effluent plays a major role in the industry. Particularly in copper industry, recycling techniques for treated effluents adopt conventional technologies which are not energy efficient and recovery of high quality process water, free flowing salts and sludge's is very low. This paper presents an overview of enhanced modern technology for treated effluents in copper industry making it more efficient with high recovery of high quality process water and free flowing salts. Life cycle cost (LCC) would be 15-20% lower than the conventional technologies. The conventional technology can be replaced with this proposed technique in the existing and upcoming copper industries.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.57-62
• /
• 1998

In this research, the removal or uptake of heavy metals such as coppers by using oxalic acid metabolism of wood rot fungi, Tyromyces palustris were endeavored. As results, the addition of oxalic acid to copper containing culture did not cause the mycelium growth, but Tyromyces palustris was able to grow in this culture without inhibition. Tyromyces palustris grew with the cicular halo type in copper containing culture, and this type was formed as collectives after examining by microscope, and considered as copper oxalates by analyzing FT-IR comparison experiment with standards. According to this result, Tyromyces palustris has secreted oxalic acid during incubation, this secreted oxalic acid was combined with coppers, and formed copper oxalates by chelating reactions. In other words, the oxalic acid was might be as non-toxifying agent of coppers in medium. By using this copper removal mechanisms, Tyromyces palustris immobilized sawdust was used in bench scale air lift system for removing coppers. The added coppers were almost removed from the system within 72hrs. Therefore, this nonenzymatic wood degradation mechanism may give a possibility for removing coppers from copper containing waste water.

• Advances in concrete construction
• /
• v.6 no.5
• /
• pp.545-560
• /
• 2018

The ever-increasing cost of natural sand and the environmental impacts of extracting manufactured sand (quarry sand) calls for exploring the potential to use alternative materials as fine aggregates in concrete. Copper slag and ferrous slag are industrial by products obtained from the smelting process of copper and iron respectively. A large quantity of copper slag and ferrous slag end up being disposed as waste in landfills and this poses a serious threat to the environment. Copper slag and ferrous slag have similar physical and chemical properties as natural sand and also exhibit pozzolanic activity. This paper studies the technical feasibility of industrial by-products such as copper slag and ferrous slag to replace the fine aggregate in concrete by evaluating the workability, strength and durability characteristics of concrete. The test results indicate that the strength properties are not affected by 40% or 100% replacement of quarry sand with iron slag or copper slag. However, 40% replacement of quarry sand with iron slag or copper slag in concrete is recommended considering the durability aspects of concrete.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.981-992
• /
• 2008

This study examined how to produce new methods of copper (II) sulfate crystallization by using a small-scale chemistry tool such as small-scale reaction surface and petri dish. The making of copper(II) sulfate is included in the 5th grade elementary science textbooks. Various copper(II) compounds were reacted with a 2 M sulfuric acid solution. The result of this study is as follows: Seven small amounts of copper(II) compounds were reacted with a few drops of 2 M sulfuric acid solution at room temperature to make a copper(II) sulfate crystal of triclinic shape. Using the petri dish method, a copper(II) sulfate crystal could be identified within one hour of reacting copper(II) hydroxide, copper(II) carbonate, copper(II) nitrate, copper(II) perchlorate, cupric(II) formate from a few drops of 2 M sulfuric acid solution at room temperature. When using the lap top method for copper(II) perchlorate, cupric formate, a proper crystal could be identified within one hour as well. SSC methods were used for the first time to make a copper sulfate crystal via chemical reaction. We can make a copper(II) sulfate crystal using a simple method which is easier, safer and saves time in class. And since a small quantity of chemicals are being used in SSC chemical methods, waste is greatly reduced. This lessens the amount of environmental problems caused by the experiment. This can be helpful in preserving nature. In addition the cost of chemical and laboratory equipment is greatly reduced because it uses material that we find in our daily lives. There will be continued study of small-scale methods such as improvement of new programs, study and training of teachers, and securing SSC tools. I would like to suggest such as SSC methods are applicable in elementary School Science. I would like it to become a wide spread program.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.4
• /
• pp.293-299
• /
• 2014

The bentonite, a buffer material, is essential for the deep geological disposal of HLW (high-level radioactive waste), and it is important to know its characteristic long-term evolution in the underground environment. With an assumption that the concentration of aqueous copper ions will increase if copper-coated materials on a metal canister are corroded, we examined some characteristic ion-exchanges and cation release phenomena occurring in the bentonite clay (montmorillonite) interacted with aqueous Cu cations. During the interaction between dissolved copper and bentonite, Na rather than Ca cations in the expandable clay were preferentially replaced by Cu ions in the experiment. In addition, the Cu-exchanged montmorillonite was characterized by an asymmetric X-ray diffracted pattern with relatively collapsed interlayers compared to the raw sample. These results indicate that the gradual change of the original bentonite property may occur in a underground disposal condition. We are going to further study the characteristic chemical and mineralogical changes of the bentonite buffer to be used for the disposal site by conducting additional experiments.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.516-521
• /
• 2001

This research was for reducing leachated concentration of hazardous pollutants in bottom ash from municipal solid waste combustors(200 tons/day) of Korea. Lead and copper compounds were selected as main pollutants. For reducing of leachated level, optimal conditions were observed using air oxidation for lead compounds and water washing method for copper compounds. and it was observed stable pH range of bottom ash from analyzing lechated level by pH variation.

• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.45-53
• /
• 2005

Electro-generated chlorine leaching of waste printed circuit boards was investigated in hydrochloric acid solutions. Non-magnetic component of $0.6{\sim}1.2mm$ was prepared by grinding, magnetic separation, and sieving. The non-magnetic component of pulverized printed circuit board contained about 45% of metal component, in which copper was about 83.6%. The leaching rate of copper was greatly affected by current density and agitation speed. The leaching of copper up to 98% was achieved at $20mA/cm^2$, $50^{\circ}C$, 180 minutes, and 600 rpm in 1M HCl solutions. Increasing agitation and lowering current density enhanced utilization efficiency of electro-generated chlorine. Leaching of copper was suppressed at the initial stage, while the minor metal elements, such as aluminum, lead, and tin, were dominantly leached out.