• Journal of Korean society of Dental Hygiene
• /
• v.9 no.2
• /
• pp.147-163
• /
• 2009

This study was attempted in order to look into 'Assist work' as to Implant system which dental hygienists perform in a clinical field. Subjects of this research were 362 dental hygienists who work at general hospital, University hospital, dental hospital, and dental clinics located in Seoul, Kyeong-gi, In-chon, and Jeon-buk area. As to research tool, we produced questionnaire which was comprised of the total 25 items regarding 3 of general features (age, career of dental hygienist, and personality), 6 of implant system assist work, 3 of Informed consent before surgery, 6 of preoperative preparation and maintenance related business, and 7 items related to postoperative maintenance. By using SPSS program, collected data was analyzed. Results of analysis in this study were as follow; 1. As to implant related education, dental hygienists' experience of education was high as 77.7%, and the people who is needed more education was 86.3%. Consequently, dental hygienists' concern about the implant related education was very high. 2. It was observed that most of informed consent making approvement by announcement to the surgical operation was made by dental hygienist before implant as 95%. 3. Over 80% of dental hygienists performed acquisition of cleanliness technology, motivation, back up articles preparation, treatment area arrangement, and etc. which we can check by preoperative maintenance items. In particular, response about the motivation was very high as more than 90%. 4. When performing an operation, in the case of disinfecting finger was low for 53.9% and the method was mainly washing with drug solution, and gown sterilization was performed only in 52.2%. Therefore education regarding disinfection was urgently needed. 5. Significance of education could be known that answers of hygienists experienced education appeared highly in items of maintenance method and there was statistically significant difference(p<0.05). 6. In case that assist work were 21cases or greater, agitation measurement was the most many performed in 68.9% and difference was showed up significantly(p<0.001). 7. Evaluation about periodontal tissue was high in dental hygienists who had experienced education and also there was statistically significant difference. In conclusion, assist work of dental hygienists was very comprehensive when implant surgery was performed, and all of items excluding hand disinfection or gown disinfection were highly showed up in most of hygienists. However, since there is the limit that we didn't investigate the quality of performing contents. It is considered that further study regarding the content has to be progressed for supporting this result in the future.

• Applied Biological Chemistry
• /
• v.34 no.4
• /
• pp.373-378
• /
• 1991

The skin and fleshy substance on the net fiber of sponge-gourd fruit pressed mechanically was removed with 0.2% NaOH solution in $3{\sim}5$ hours. The treatment of 0.2% NaOH with 0.02% Monopol(non-ionogenic polyoxethylen derivative) as surfactnat and with 0.1% $Ca(OCl)_2$ as bleaching agent enhanced the effect to remove the fleshy substance and improve the quality of net fiber. Also, the wet hardness and tensile strength of net fiber were controlled by the crosslinkage of the fiber with glu tardialdehyde, glyoxal, and formalin, respectively. The net fiber was stable on the acid and alkaline solutions. Also the range of temperature to degradate the fiber was $338{\sim}385^{\circ}C$. These values indicated a fair stability. The improved net fiber can be used for raw material of bath, dish washing, oil and gas filter, and many kinds of decorations.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.204-211
• /
• 2006

This study investigated the effect of salt and glucono-${\delta}$-lactone (GdL) on the cold-set binding of restructured pork washed and pressurized at 200 MPa. Binding strength, PH, water holding capacity (WHC) and color were determined. NaCl improved pH, WHC and binding strength. GdL also increased binding strength while decreased WHC and pH significantly (p<0.05). However, low GdL level combined with NaCl showed high pH and WHC, compared to control. In color, NaCl decreased $L^*$-value with increasing $a^*$-value significantly (p<0.05). In contrast to NaCl, GdL increased $L^*$-value and decreased $a^*$-value. GdL tended to decrease $b^*$-value and significant differences were found when GdL was added above 1%. Pearson's correlation coefficients presented that NaCl had a significant effect on binding strength (0.6632) and lightness (-0.7330) while GdL had a significant correlation with all parameters barring binding strength. The results indicated that under washing and pressure treatments, GdL had a potential effect on cold-set binding with reducing NaCl concentration, especially when low GdL concentration combined with NaCl was added.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.6
• /
• pp.397-405
• /
• 2012

In this study, performance evaluation of newly developed technology for the economical and safe removal of volatile organic compounds (VOCs) coming out from electronic devices washing operation and offensive odor induction materials was made. Metal oxidization catalyst has shown 50% of removal efficiency at the temperature of $220^{\circ}C$. Composite metal oxidization catalyst applied in this study has shown that the actual catalysis has started at the temperature of $100^{\circ}C$. Comprehensive analysis on the catalyst property using Mn-Cu metal oxidization catalyst in the pilot-scale unit was made and the removal efficiency was variable with temperature and space velocity. Full-scale unit developed based on the pilot-scale unit operation has shown 95% of removal efficiency at the temperature of $160^{\circ}C$. Optimum elimination effective rates for the space velocity was found to be $6,000hr^{-1}$. The most appropriate processing treatment range for the inflow concentration of VOCs was between 200 ppm to 4,000 ppm. Catalyst control temperature showed high destruction efficiency at $150{\sim}200^{\circ}C$ degrees Celsius in 90~99%. External heat source was not necessary due to the self-heat reaction incase of VOCs inflow concentration is more than 1,000 ppm. Equipment and fuel costs compared to the conventional RTO/RCO method can be reduced by 50% and 75% respectively. And it was checked when there was poisoning for sulfide and acid gas.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.931-934
• /
• 2002

To establish the optimal conditions for increasing oil yields from grape seed, extraction solvent, extraction time, and temperature were examined. Using grinding, grinding and roasting, grinding and steaming, and grinding, roasting, and steaming methods. Pressing extraction method resulted in 34.0% oil yield. Grinding and roasting, grinding and steaming, and grinding, roasting, and steaming gave 64.3, 63.0, and 65.6% yield, respectively. Ether solvent treatment resulted in 77.4 and 80.9% recoveries after 24 and 48 h static, respectively. The results of sensory evaluation revealed, oils extracted under optimal condition showed the best flavor, aroma, and whor, followed by grinding, grinding and roasting, grinding, roasting, and steaming, and grinding and steaming. Taking these results together, the optimal methods for oils extraction from grape seed were as follows: grape seed ${\rightarrow}$ washing ${\rightarrow}$ drying ${\rightarrow}$ roasting ($95{\sim}100^{\circ}C$ for 20 min) ${\rightarrow}$ cooling (room temperature) grinding ${\rightarrow}$ (0.5 mm>) ${\rightarrow}$ steaming ($0.8{\sim}0.9\;kg{\cdot}f/cm^2$ for 10 min) ${\rightarrow}$ pressing ($1st\;400\;kg/cm^2\;for\;2{\sim}3\;min,\;2^{nd}\;550{\sim}600\;/cm^2$ for 10 min, $3^{rd}\;700kg/cm^2$ for 60 min) ${\rightarrow}$ oils (yield $;85{\sim}90%$).

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.377-398
• /
• 1993

A survey of infant practices was conducted to provide information on which to base planned nursing interventions. The subjects were a convenience sample of 168 mothers visiting out - patients departments of five general hospitals and one public health center in Seoul for immunizations or treatment for common colds for their infants from two to 12 months of age. Data collection was carried out from July 8th to September 30th, 1991 using a questionnaire of 84 questions, 31 on the type of feeding, 22 on supplementary feeding and 21 on demographic infer mation. The results are summarized as follows : 1) The type of feeding was primarily artificial feed-ing (63.1%), followed by mixed feeding (22%) and breast feeding (14.9%) of the 59 mothers expecting during pregnancy to breast feed, 54. 2% changed artificial feeding and 30.5% went on to breast feed as they had expected. For mothers expecting to continue breast feeding over seven months. only one infant was being breast fed for over seven months. 2) For the 106 mothers using artificial feeding, 70. 8% hed attempted breast feeding, 64% of them for less than a month. Breast milk had been suppressed by for medication (38.7%) : 34.9% had used no specia] means. 3) The major reasons for replacing breast feeding with artificial feeding were the infants' demand for more milk (47.2% ) and insufficient supply of breast milk (49.3％). 4) Most mixed feeding was started at the age of one to three months (59.5%). Only 34.4% gave an artificial feeding after breast feeding : most (46%) alternated breast feeding with artificial feeding. On the whole, the motive for mixed feeding was the lack of breast milk (70.3%). 5) Many mothers (81.8%) were adding vitamin or mineral supplements to artificial milk and 51.5% were adding something to faciliate digestion. As for the method of sterilizing milk bottles and nipples, 56% had sterilized them together in boiling water from the beginning : 27% were just washing the bottles after boiling only once initially when measuring artificial milk powder, 31. 5% of the mothers over filled the measuring spoon rather than to the level. 6) The mother's occupation was related to her way of feeding. Mothers at home full time did more breast feeding than mothers employed outside the home. (x²=5.72, p=〈0.05). 7) Most mothers began supplementary food, from three to four months (48.8%) : 11.2% began later than seven months. Supplementary food was given between milk feedings by 67.2% of the mothers : 19.2% gave it before a milk feeding. Some mothers(26.4%) made their own supplementary food : 19.2% used ready - made supplementary food products for convenience. Recommendations for nursing interventions included : 1. Prenatal education about the advantages of breast feeding and breast care, and home visits after delivery for counselling related to breast feeding. Correct preparation of artificial feeding methods need to be taught in both pre & postnatal periods. In addition, specific education about supplementary feeding needed. 2. Further research is indicated about the Perceived lack of supply of breast milk and about the effectiveness of nursing interventions to Promote breast feeding.

• Clean Technology
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2012

In this study, aluminum hydroxide ($Al(OH)_3$) was synthesized by Bayer process and sodium contained in $Al(OH)_3$ was removed with the acid solution such as HCl and acetic acid for the synthesis of high purity alumina. The bauxite produced in Queensland of Australia was used for the production of alumina by Bayer, and was crushed to a particle size of below 10 um by attrition mill. The crushed bauxite was treated in sodium hydroxide solution of 5 N for the elution of aluminum component. The elution of aluminum from bauxite was carried out at $140^{\circ}C$ and 3.4 atm in autoclave. The sample solution was separated to the red mud and liquid solution by filter paper. The elution of aluminum from bauxite was confirmed with changing a structure and aluminum content in both bauxite and red mud analyzed by XRD and EDX. Aluminum contained in the separated solution was crystallized to $Al(OH)_3$ with the addition of aluminum hydroxide used as the seed material. $Al(OH)_3$ powder obtained during the crystallization process was purified by several times washing with distillated water. It was also confirmed that the sodium remained in $Al(OH)_3$ powder is removed with acid solution. The purity of $Al(OH)_3$ powder produced in this study was 99.3% and the content of sodium was reduced to approximately 0.009% after the acid treatment.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.957-964
• /
• 2010

The deactivated catalyzed diesel particulate filter-trap (DPF) was remanufactured by ultrasonic wave treatment with various prepared solutions, followed by active component re-impregnation, and the emission control performance and surface properties of remanufactured DPF were studied at various remanufacturing conditions. The proper ultrasonic wave cleaning time at various prepared solutions and optimal re-impregnation amounts of active component for the best emission control performance of DPF were investigated and its performance tests were also carried out with various temperatures for the conversions of CO, THC (total hydrocarbon) and PM (particulate matter) by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the emission control performance of DPF remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acid/base solutions and active component re-impregnation method was recovered to 95% level of its activity compared to that of the fresh DPF, which was caused by removing the deactivating materials from the surface of the DPF, through the analyses of performance test and their surface characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.3
• /
• pp.301-311
• /
• 2011

Objectives : In order to identify the awareness of influenza A (H1N1) having currently high frequency and risk as an infectious disease, to find problems and to reflect them on curriculum improvements from students before/after clinical practices. Methods : The data was collected from 279 dental hygiene students of 1st and 2nd years at G health college university from December 6th 2010 to December 10th 2010. The questionnaire were consisted of awareness of influenza A (H1N1), preventive attitude, sociodemographic characteristics. Results : 1. 1st year was 51.6%, the case having dental experience was 51.2%, in the infection control training experience 'had' was 46.6%. In the route acquiring the information, the mass media was 70.6%, in obtained information, personal hygiene was 82.1%. In the impact on human body, 'great impact' was 58.1%. In terms of the most need for response and preparedness, vaccination was the highest, 67.4%. People who experienced influenza A (H1N1) were 10.7%. 2. Awareness of influenza A (H1N1) was 0.71 points, and treatment and spreading mechanism was 0.78 points, prevention was 0.63 points, causes and definition was 0.53 points. 3. In the attitude for infection prevention of influenza A (H1N1), 'washing hands before practice' was the highest, 0.99 points and 'wear the mask only in case of contact with patient within 1~2 meters upon occurrence of no aerosol' was the lowest, 0.72 points. 4. Awareness of influenza A (H1N1) according to sociodemographic characteristics showed the significant differences upon the impacts on systemic health (p<0.05). Preventive attitude didn't show a significant difference in grade, clinical experience, experience in infection control training, acquiring rmation routes, the possibility for occurrence, impact on systemic health, the most need for prevention, experience in influenza A (H1N1) (p>0.05). 5. The significantly correlated between awareness of influenza A (H1N1) and preventive attitude(p<0.01). Conclusions : Information and preventive attitude for influenza A (H1N1) as well as systematic training programs to identify actual affecting factors and to improve the practice are needed. Also government's institutional support is needed.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.77-85
• /
• 1998

To treat effectively EDIR (electrodeposition ion removal) wastewater in terms of CO$_{Mn}$ 1,500~2,000 ppm generated from aluminum painting process, a RO (reverse osmosis) process was designed and installed to recover and reuse the concentrated solvent sent back to the electrocodeposition tank while the permeate reused as rinse water. A RO system in which three polyamide-spiral wound modules ($102\Phi \times 1,016L$ mm) connnected in series had been running to treat 20 m$^3$ in waste volume in 3 days batch operation at the condition of system recovery of 30 %, applied pressure 11.5 $kg_f/cm^2$ and room temperature. During 42 hours continuous operation leading to 5-fold decrease in waste volume, nearly constant permeation flux of 390 l/m$^2$-hr was maintained and the permeate with average CO$_{Mn}$, 300 ppm was obtained which could be used for washing the remaining paint solution in ion-exchange tower instead of demineralized water. Also COD$_{Mn}$ rejection as a function of running time was observed to be in the range of 78~87 % and the observed solvent rejections for ethyl cellusolve, buthyl cellusolve and n-butanol were 79 %, 87 % and 70 %, respectively.