• 한국식품조리과학회지
• /
• 제9권2호
• /
• pp.109-115
• /
• 1993

This study was attempted to investigate the current status of industry food service management in Chonbuk province. The survey for the analysis was conducted through the questionaires to dietitian. The following results are to be noted. 1. Only one dietitian was employed regardless of feeding numbers and feeding times, and the average number of cooks comes to 5∼6 persons. Among 51 food service places for the study, 84.3% provided more than two meals a day. Feeding number were 200∼1000 people per one meal (64.7%) and feeding cost amounts to 700∼1000 won per meal per one person. 2. The food preferences and budget were primary considerations in menu planning. The type of menus was a non-selective menu with a seven-day cycle (83.7%). Most of dietitian (94.1%) had control of food purchasing, receiving and checking procedure and prefered placing orders by phone (94.5%) through the purveyors (86.4%). 3. In many food service places (70.5%), the mass food preparation was controlled of cooking method and standardized recipes were not undertaken by management Also, the food quality control such as flavor, texture, appearance and temperature was not fully established in food service system. 4. They used the method of manual dish washing operations (88%) and about 71.4% of them are dependent on boiling method of ultrabiolet light for disinfection of kitchen utensils. 5. The performance rates of dietitian management responsibility showed as nutritional management 100%, working management 72.4%, sanitary management 85.6%, personnel management 64.5% and nutrition education 40.7%, but they did not perform the objective and systematic their own responsibility as specialized dietitian because only few dietitian used basic check list and management tools. In addition, dietitian (21.6%) worked beyond their field. In the result, only 54.9% dietitian have satisfied their own occupation and most of them emphasized on practical working in educational curriculums.

• Clinical and Experimental Reproductive Medicine
• /
• 제24권3호
• /
• pp.325-333
• /
• 1997

The use of hormonal stimulation in human in vitro fertilization and embryo transfer (IVF-ET) leads to increased production of embryos for ET. So to avoid high pregnancies and to allow conception in future, unstimulated cycles, cryopreservation of spare embryos is desirable. One of the improvement of cryopreservation methods is vitrification. We cryopreserved mouse day 3 embryos by vitrification using the three different vitrification solution (EFS40, VS11 and VS3a). EFS40 solution is consisted of 40% (v/v) ethylene glycol, Ficol170 30% (w/v) and 0.5M sucrose and VS11 is 6.0M ethylene glycol and 1.8M glycerol. And VS3a is 6.5M glycerol and 6% (w/v) BSA (bovine serum albumin). First we tested the toxicity of three vitrification solution by exposure to these solution during 3 min. After washing by thawing solution, the survival rates of each groups are 95.5%, 90.9% and 84.4% (EFS40, VS11 and VS3a). High percentages of them developed to expanded blastocyst and hatching embryos in culture 48hrs 94.2%, 97.7%, 100% and 97.4% (no treatment group, EFS40, VS11 and VS3a). So there is no significant differences among the each group. Second, after thawing of vitirfied embryos, the survival rates of each groups are 96.8% (slow freeze), 94.1% (EFS40), 85.5% (VS11) and 80.0% (VS3a, P vs. no freeze or EFS40 is 0.01). Vitrified embryos exhibited a high rate of development in vitro after 48hrs culture. The percentages of each group to blastocyst and hatching embryos are 88.7% (no freeze), 91.8% (slow freeze), 93.4% (EFS40), 87.7% (VS11) and 73.0% (VS3a, P vs. other group is 0.01). The results suggest that there is no significant differences in exposure of various vitrification solution and day 3 mouse embryos can be vitrified in solution EFS40 and VS11 by simple procedure.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권5호
• /
• pp.46-55
• /
• 2013

The main objective was to evaluate the efficiencies of different separation techniques, such as gravity separation, magnetic separation, and aerial separation. Zinc and cadmium removal efficiencies by gravity separation and magnetic separation were 28.3~29.3% and 19.1%, respectively, and were higher than the efficiency obtained by aerial separation. Results showed that the combination of gravity separation and magnetic separation in series which was to maximize the removal efficiencies gave removal efficiency of 21.5~38.7% for zinc and 22.1~23.4% for cadmium. The mass of soil meeting the regulation standards for zinc and cadmium after retrieval from the combined separation process accounted for approximately 80% of the treated soil that would be reusable without the pre-treatment procedure as the neutralization process using in the soil washing method. Physical separation techniques utilizing heavy metal properties are the alternative method to remediate heavy-metal contaminated soils in environmental and economic aspects.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.302-315
• /
• 2021

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

• Archives of Plastic Surgery
• /
• 제49권2호
• /
• pp.266-274
• /
• 2022

Background Many authors have researched ways to optimize fat grafting by looking for a technique that offers safe and long-term fat survival rate. To date, there is no standardized protocol. We designed a "hydraulic system technique" optimizing the relationship among the quantity of injected fat, operative time, and material cost to establish fat volume cutoffs for a single procedure. Methods Thirty-six patients underwent fat grafting surgery and were organized into three groups according to material used: standard, "1-track," and "2-tracks" systems. The amount of harvested and grafted fat as well as material used for each procedure was collected. Operating times were recorded and statistical analysis was performed to establish the relationship with the amount of treated fat. Results In 15 cases the standard system was used (mean treated fat 72 [30-100] mL, mean cost 4.23 ± 0.27 euros), in 11 cases the "1-track" system (mean treated fat 183.3 [120-280] mL, mean cost 7.63 ± 0.6 euros), and in 10 cases the "2-tracks" one (mean treated fat 311[220-550] mL, mean cost 12.47 ± 1 euros). The mean time difference between the standard system and the "1-track" system is statistically significant starting from three fat syringes (90 mL) in 17.66 versus 6.87 minutes. The difference between the "1-track" system and "2-tracks" system becomes statistically significant from 240 mL of fat in 15 minutes ("1-track") versus 9.3 minutes for the "2-tracks" system. Conclusion Data analysis would indicate the use of the standard system, "1-track," and "2-tracks" to treat an amount of fat < 90 mL of fat, 90 ÷ 240 mL of fat, and ≥ 240 mL of fat, respectively.

• 한국식품영양과학회지
• /
• 제43권7호
• /
• pp.1025-1035
• /
• 2014

본 연구는 polyethyleneimine(PEI)을 이용하여 음이온계 레진에 비 고정화 효소인 lipase AH(Burkholderia cepacia)를 고정화한 후 효소적 interesterification을 통해 고정화 효소의 반응 특성을 확인하고자 하였다. 효소적 interesterification에 canola oil, palmitic ethyl ester와 stearic ethyl ester를 기질로 사용하였으며 합성물의 TAG 조성 분석을 통해 특성 연구를 진행하였다. 또한 두 가지 고정화방법(multi layer, mono layer)으로 고정화를 진행하였으며 사용된 lipase solution의 농도와 pH를 달리하여 실시하였다. 먼저 효소와 support 간의 친화력을 확인하기 위하여 단백질 함량을 측정하였다. 그 결과 고정화에 사용된 lipase solution의 농도가 8 mg/mL일 때 친화력이 좋았으며 MUIM의 경우 pH 7.5에서, MOIM의 경우 pH 8.0에서 고정화 효율이 가장 좋았다. 또한 고정화 효소의 활성을 확인하기 위하여 interesterification을 진행하였고 TAG와 sn-2 position 분석을 통하여 활성을 비교하였다. 이러한 결과를 참고하여 가장 친화력이 좋았던 조건에서 고정화를 진행하였다. 그 결과 MUIM의 경우 total saturated fatty acid(${\Sigma}SFA$)의 함량이 16.79 area%였으며 MOIM의 경우는 ${\Sigma}SFA$의 함량이 26.17 area%로 나타났다. 반면에 sn-2 position 분석결과 MUIM과 MOIM 모두 palmitic acid와 stearic acid의 함량이 증가한 경향을 나타내었는데, 이는 기존의 sn-1, 3 특이성을 가지는 lipase AH가 고정화를 통해 무작위 특이성으로 변화한 것으로 생각되었다. 또한 RP-HPLC를 이용하여 TAG의 조성을 확인한 결과, 기질은 canola oil이 주로 OOO와 LOO로 조성되었으나 고정화 효소의 interesterification 반응 후 합성물은 주로 POO/SLO, LPO/LOP와 SOO, SOS 등으로 이루어진 것으로 확인되었다. 위와 같은 결과를 바탕으로 최종 생산된 MUIM과 MOIM을 이용하여 interesterification 반응을 온도, 시간을 달리하여 진행하였다. 전체적으로 MOIM의 활성이 가장 높았으며 lipase AH, MOIM과 MUIM 모두 반응시간이 증가할수록 ${\Sigma}SFA$의 함량은 증가하였으나 12시간 이후로는 시간대비 효율은 크게 증가하지 않았다. 또한 시간이 증가함에 따라 sn-2 position의 ${\Sigma}SFA$ 함량이 높아졌다. 한편 반응온도가 높을수록 ${\Sigma}SFA$의 함량도 증가하였는데, 이는 상온인 $25^{\circ}C$보다 높은 melting point를 가지는 stearic ethyl ester와 palmitic ethyl ester가 semi solid 형태로 존재하여 활성이 저해된 것으로 생각된다. 또한 lipase AH는 재사용이 불가능하였지만 고정화 효소인 MUIM과 MOIM은 5번을 재사용하여도 그 효소의 활성이 유지되는 것을 확인할 수 있었다. 이러한 결과를 토대로 음이온계 레진에 PEI를 이용하여 lipase AH를 고정화하였을 경우 비 고정화 효소인 lipase AH보다 MUIM과 MOIM의 활성이 더 높아 산업적으로 이용 가능할 것으로 생각된다.

• 한국산업보건학회지
• /
• 제10권1호
• /
• pp.1-17
• /
• 2000

Carcinogen-DNA adduct analysis has potential for biomonitoring the earliest effects of exposure to many chemical carcinogens. They are the covalent reaction products of electrophiles and nucleophilic sites on DNA and the initial damage to DNA induced by many carcinogens. So many researchers begin to use them as biomarker for monitoring the earliest exposure of carcinogens and develop the effective analytical techniques about them. Randerath, Gupta and coworkers(1981, 1982) has also developed a $^{32}P$-postlabelling method as one among them. A major project for biomonitoring workers with carcinogen-DNA adducts is to develop non-invasive samples instead of tissues of target organs such as baldder and lung. This study use the exfoliated urothelial cells in urine for examine benzidine-DNA adducts. The content of exfoliated urothelial cells is not enough to significantly measure DNA content with spectrophotometer, and require the another way. So firstly washing the collected cells with PBS and 70% ethanol and centrifuge them for removing the crystals in urine, which block the isolation of DNA adducts. And then, measure the total nucleotide after $^{32}P$-postlabelling for calculating RAL. $[{\gamma}-^{32}P]ATP$ using for $^{32}P$-postlabelling, can synthesize with $[^{32}P]H_3PO_4$, and reagent and enzyme mixture (RM, EM), which is very economic in case of requiring a lot of them. Chromatography was composed of two steps. First step was to separate adduct ones from unadducted nucleotide, and secondary step was separate each adduct, which were performed with 4 kinds of solvents and different directions on TLC. With this procedure, we measure the DNA adducts in exfoliated urothelial cells of workers who were employed in benzidine and benzidine-dye company. RAL of adducts were $89.0{\times}10^7$ and $57.0{\times}10^7$ in them. In conclusion, we can significantly measure the DNA adduct in exfoliated urothelial cells by using the above $^{32}P$-postlabelling procedures, and use them to be biomonitoring workers who exposed carcinogens.

• Tuberculosis and Respiratory Diseases
• /
• 제38권4호
• /
• pp.340-346
• /
• 1991

Tuberculous tracheobronchitis is defined as a specific inflammation of the trachea or major bronchi caused by the tubercle bacillus and recognized as one of the most common and serious complication of pulmonary tuberculosis. It had been a diagnostic challenge in prebronchoscopic era and since 1968, fiberoptic bronchoscopy has been accepted as a safe and valuable diagnostic procedure of tuberculous tracheobronchitis. Now, it remains a troublesome therapeutic problem due to its sequelae such as bronchostenosis, bronchiectasis and bronchial deformity. The authors analyzed the clinical features, radiological findings and bronchoscopic findings with pathologic and bacteriologic study on 61 cases of tuberculous tracheobronchitis and following results were obtained. 1) The peak incidence was in the fourth decade and male to female ratio was 1:3.4. 2) The most common symptom was cough (86.9%) and followed by sputum (49.2%), dyspnea (27.9%), fever (19.8%), weight loss (11.5%), hemoptysis (6.6%), hoarseness (6.6%) and chest discomfort (3.3%) and localized wheezing was heard in 18%. 3) In chest X-ray, consolidation with collapse was observed in 70.5%, and followed by consolidation only (18.0%), mediastinal node enlargement (8.2%), cavitary lesion (6.6%), suspicious hilar mass (3.3%) and miliary lesion (1.6%) and there was no abnormal findings in 4.9%. 4) Bronchoscopy showed hyperplastic lesion in 67.2%, mucosal lesion (18.0%), ulcerative lesion (9.8%) and stenotic lesion (4.9%). The most common site of bronchial lesion was right upper bronchus (36.1%) and followed by right main bronchus (34.4%), left main bronchus (29.5%), left upper bronchus (16.4%), right middle bronchus (8.2%), right lower bronchus (6.6%) and left lower bronchus (3.3%). 5) Chronic granulomatous inflammation with or without caseation necrosis on microscopic examination was confirmed in 69.7%, bronchial washing AFB stain was positive in 34.1%, prebronchoscopic sputum AFB stain was positive in 88.1% and postbronchoscopic sputum AFB stain was positive in 30.1%.

• 한국수산과학회지
• /
• 제5권3호
• /
• pp.97-103
• /
• 1972

담수어인 잉어 Cyprinus carpio의 어묵 제조에 있어서 최적 가공조건을 구명하기 위한 기초자료를 얻기 위하여 점탄성 보강의 요소가 되는 NaCl, 전분, Polyphosphate의 첨가양, 수세회수 및 이단가열법 등을 중심으로 이들 인자가 제품의 품질에 미치는 영향을 jelly강도 측정 및 관능검사법으로 검토하였다. 원료육에 대하여 NaCl은 $3\%$, 전분은 $5\~15\%$, polyphosphate는 $0.3\%$ 첨가한 제품이 jelly강도도 높고, 맛이나 광택도 좋았다. 수세회수는 원료육에 대하여 10배양의 수도수(수온 $2\~3^{\circ}C$)로 매회 30분간 8회까지는 jelly강도가 증가하였으나 그 이상 수세회수를 증가시켜도 제품의 jelly강도에는는 큰 변화가 없었다. 그리고 이단가열법은 jelly강도 보강효과가 있었다. 이상의 결과로 보아 잉어 어묵을 가공할 때 수세회수는 $2\~3^{\circ}C$의 수도수를 원료육에 대하여 10배량 가하여 30분간씩 8회 세척하고, 수세한 육에 대하여 NaCl은 $3\%$, 전분 $5\~15\%$, polyphosphate $0.3\%$를 첨가하여 고기 갈이한 다음 $35^{\circ}C$에서 1시간 일단 가열한 후 $90^{\circ}C$에서 30분간 이단가열하는 것이 가장 좋다는 결론을 얻었다.

• 대한화학회지
• /
• 제39권3호
• /
• pp.204-212
• /
• 1995

매트릭스 개선제를 이용하여 물시료중 흔적량 납의 흑연로 원자흡수 분광분석에 관하여 검토하였다. 이 때 시료의 매트릭스를 개선시킬 수 있는 개선제의 종류를 찾고 그것의 사용량을 최적화시켰다. 쉽게 휘발하는 성질을 가진 납은 개선제가 없으면 희화 및 원자화 온도가 많이 낮으며 측정되는 흡광도도 낮고, 재현성도 좋지 않다. 따라서 개선제를 사용할 필요가 있는데, 납 50 ${\mu}g/mL$ 용액에 팔라듐을 5 ng/mL되게 첨가하면 희화온도를 400$^{\circ}C$에서 1,000$^{\circ}C$로, 원자화 온도를 1800$^{\circ}C$에서 2,000$^{\circ}C$로 증가시킬 수 있었다. 또, 보조 개선제로 알루미늄을 1.5 ${\mu}g/mL$ 혼합하여 사용하면 희화온도를 150$^{\circ}C$ 더 증가시킬 수 있다. 개선제로 팔라듐을 사용했을 경우가 개선제를 사용하지 않았을 경우보다 감도를 5배 이상 증가시킬 수 있었고, 상대 표준편차도 5% 이내가 될 정도로 좋은 재현성을 나타내었다. 그리고 본 실험방법의 유용성을 알아보기 위하여 학교 폐수와 파이프 세정 작업중의 수돗물을 실제 시료로 선택하여 정량하였는데 재현성이 좋은 결과를 얻었고. 이들 시료에 일정량의 납을 첨가하여 회수율을 얻었는데 89% 이상으로 정량적이었다.