• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.269-274
• /
• 2018

This study was done to identify the effects of the hand washing procedure poster on the hand washing behaviors after Mers outbreak. Method: This study was conducted by observing a total of 370 people(185 people in no- poster zone, 185 people in poster zone) who used the public restroom. Results: As a result of comparing the hand washing with and without the poster, the subjects who washed their hands with the poster around were 83.2%, which was higher than the 47% of the subjects without the poster. The Time spent on the hand washing was similar between the groups with or without the poster around. Also only 3.3% of the subjects actually completed the entire 6 procedures of hand washing. The subjects who finished more than 4 procedures out of 6 were 17% from the group with the poster around, and 10.3% from the group without. Conclusion: The hand washing poster was effective in encouraging the behavior itself, but not specifically in the right way during the ideal time nor the right procedures. Therefore, verbal instructions made every time washing hands or more visual effective posters are required to enhance the hand washing procedures.

• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.213-221
• /
• 2019

Objective: This study was performed to evaluate gender and age differences in hygienic behavior among the general population, focusing on hand-washing habits and the microbial load of hands. Methods: A self-administered questionnaire survey and a separate microbial examination were performed. The Pearson's correlation between hand-washing habits and microbial load was analyzed. Results: In the questionnaire survey on hand-washing habits, gender differences were found in hand-washing frequency, use of hand-washing agents, and hand drying methods (p<0.05). Age differences were found in numbers of washing parts of the hands and also in hand drying methods (p<0.05). Females showed better habits washing hands than did males, as did older people compared to younger. In the microbial examination of indicator bacteria on their hands, younger people tended to show a higher load of total aerobic bacteria than did the older, and females showed a higher load of total coliforms than did males (p<0.05). There were significant relationships between the load of total aerobic bacteria and hand-washing frequency, duration, and method of turning-off water (p<0.05). Conclusions: Although females were expected to show a better practice of hand-washing than were males based on the survey results, they showed a higher level of total coliforms in the hand examination. The older age group showed better hand-washing habits than did the younger age group and had less total aerobic bacteria on their hands. These inter-gender and age differences highlight the need for development and implementation of gender-and age-specific educational programs or campaigns.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1119-1120
• /
• 2011

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.6 s.261
• /
• pp.499-506
• /
• 2007

This study aims to propose evaluation methods of chemical washing performance and estimate the washing capability by flowing detergent/water solution for application to home appliances such as dishwashers. Standard pollutant is stearic acid. A numerical study is also tried using a SIMPLER code. Preliminary experiments are performed by varying the concentration and temperature of the solution. From the pre-experiments, 10 minute pre-curing time is found to be necessary to remove the stearic acid. Stoichiometric ratio and detergent consumption coefficient of reaction between the detergent and stearic are estimated following a proposed method. Washing experiments of pollutant to compare with the numerical results are performed. The relative errors between the experimental and the numerical results with pre-curing time included are less than 7%. In conclusion, important mechanisms of chemical washing are revealed and methods of predicting washing performance are well established.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1311-1314
• /
• 2005

Recently drum washing machines are required to improve not only functions, but also endurance security. The spider is one of the major parts in a drum washing machine as a power transmission device. It is needed estimating for fatigue life because it rotates at high velocity when the drum washing machine works. In this study, we tried to estimate fatigue life of the Spider with CAE and verified the accuracy by comparing the CAE results with the experimental results. The estimation method of fatigue life for the spider with CAE will be applied to raise the efficiency of time and money in the design process of a new drum washing machine.

• The Korean Journal of Ceramics
• /
• v.7 no.2
• /
• pp.55-57
• /
• 2001

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. Socalled, it was the solvent washing dry. Three organic solvents (methanol, ethanol and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol and acetone were available organic solvents for this method. The tapes washed in methanol, ethanol and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not found any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.617-623
• /
• 2013

Accurate prediction of the radiated noise is important to reduce the noise of the washing machine. It is also necessary to predict the excitation force accurately because excitation force can induce noise. In order to predict the excitation force acting on the washing machine, this paper conducts source identification method by use of phase reference spectrum. In this method, the transfer function between the cabinet and the motor through FEM and the measured response from the surface of the cabinet is used. The analysis of the radiation noise from the identified exciting force has been investigated. The comparison between the predicted SPL and the measured SPL at 1m apart from the front side of the washing machine showed good tendency.

• Transactions of Materials Processing
• /
• v.3 no.3
• /
• pp.359-374
• /
• 1994

Process sequence design in sheet metal forming process by the finite element method is investigated. The forming of sheet metal into a washing machine container is used to demonstrate the design of an improved process sequence which has fewer operations. The design procedure makes extensive use of the finite element method which has simulation capabilities of elastic-plastic modeling. A one-stage process to make an initial blank to the final product is simulated to obtain information on metal flow requirements. Loading simulation for a conventional method is also performed to evaluate the design criteria which are uniform thickness distribution around the finished part and maximum punch load within limit of available press capacity. The newly designed sequence has two forming operations and can achieve net-shape manufacturing, while the conventional process sequence has three forming operations. This specific case conventional process sequence has three forming operations. This specific case can be considered for application of the method and for development of the sequence design methodology in general.

• Journal of Life Science
• /
• v.22 no.4
• /
• pp.565-568
• /
• 2012

There are various kinds of cereals used in sunsik manufacturing. Different harmful microorganisms that can contaminate these cereals have been reported. According to the different sizes of cereals used, black bean, black rice, and millet were artificially contaminated with Escherichia $Coli.$ $E.$ $coli$ contamination in cereal samples was detected after different washing steps under different conditions. The increase of washing time did not have any effect with regard to reducing $E.$ $coli$ in samples. Among several ratios between the washing solution and sample, 2:1 that have little influence to reduce $E.$ $coli$ contamination have been determined. The temperature of the washing solution is an influencing factor as well. Washing with solution at $40^{\circ}C$ could reduce 1 log of $E.$ $coli$ in samples. Among different concentrations of saline used as a washing solution, 5% could reduce 2~3 log $E.$ $coli$ in contaminated samples. However, the saline adds a salty taste to cereals when used during the washing step. To remove that, an extra washing step and large amount of washing solution are necessary in sunsik manufacturing.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.115-122
• /
• 2018

Dental environments are easily exposed to hospital microorganisms, so the risk of infection among workers is very high. Hand washing is one of the most important and basic way to reduce the risk of infection, as hands are an important medium of infection. Therefore, a convergence study was conducted between hand washing and health belief in orthodontic clinic. Analysis of differences between hand washing and health beliefs showed a significant relationship between importance of hand washing and experience in hand washing education (p=0.010) (p=0.000). Analysis of factors affecting health beliefs showed that the importance of hand washing control (p=0.014) and hands washing education experience (p=0.010) were significantly influencing factors. Infections management education is believed to be highly relevant in establishing a health when increasing interest in dental infections is expected to increase the importance of hand washing, a basic method.