• 멤브레인
• /
• 제9권4호
• /
• pp.202-208
• /
• 1999

오일과 세척제가 다량함유되어 있는 자동차 세척배수를 한외여과막으로 처리하였다 세차배수 처리에 적절한 분리막과 투과현상을 평가하기 위하여 분획분자량이 10, 30 및 100k dalton인 한회여과막과 dead-end 방식의 stirred cell (Amicon 8050)을 사용하여 투과유고과 제거율을 측정하였다 분획분자량이 작은 막에 경우 막오염현상이 미약하였으나 분획분자량이 큰 YM100 (100k dalton)인 경우에는 분리막 표면에 오일층을 형성 뿐만 아니라 막 세공 중 일부는 운전압력 조건에 따라서 변형이 가능한 오일 입자가 막을 가능성이 있다 그러나 오일 및 입자 배제율 95% 이상이며 세척제를 포함한 투과수를 재활용할 수 있어 수질오염을 최소화할 수 있을 것으로 판단된다. 또한 분획분자량이 50k dalton인 중공사형 한외여과막을 이용한 세차배수의 연속적 처리실험을 하였으며 케이크 여과모델이 잘 적용굄을 확인할수하였다.

• 대한의용생체공학회:의공학회지
• /
• 제33권4호
• /
• pp.184-193
• /
• 2012

Many studies have reported that housework done using household appliances may affect biomechanical characteristics of the musculoskeletal system. The purpose of this study was to investigate the effects of housework done using a pulsator washing machine on joints and muscles. We calculated joint torques and muscle strengths on the basis of an experimental/virtual three-dimensional motion analysis for six healthy females using the pulsator washing machine at different heights (H) and depths (D) of the inside drum (H (mm){\times}D (mm), Trial1: $962.5{\times}609.4$, Trial2: $962.5{\times}624.4$, Trial3: $982.5{\times}644.4$, Trial4: $995.5{\times}642.4$, Trial5: $1015.5{\times}677.4$). The joint torques and muscle strengths tended to be considerably different during torso flexion in the sagittal plane for all the trials. The maximum joint torques for the thoracic vertebra, left ankle, and right shoulder measured in Trial4 were significantly higher than those measured in the other trials (p < 0.05); in addition, those for the thoracic vertebra and both ankles measured in Trial5 were significantly higher than those measured in the other trials (p < 0.05). The maximum muscle strengths for the left trapezius muscle and both tibialis anterior muscles measured in Trial5 were significantly higher than those measured in the other trials (p < 0.05). These results indicate that housework done using a pulsator washing machine may affect joint torques and muscle strengths, and these effects are dependent on the height and/or depth of the inside drum of the pulsator washing machine.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4736-4741
• /
• 2014

본 연구는 PCB기판 세척에 관한 것으로 기존 세척 방법인 침전식 세척의 단점인 PCB기판 표면실링제와 접착제 공정에서 형성된 이물질이 달라붙거나 끼워 있는 경우, 쉽게 제거되지 못하는 문제점이 있었다. PCB기판이 안착되어 고속회전을 통해 원심력으로 기판의 미세한 부분까지 이물질이 제거되도록 하는 PCB기판 세청용 회전 지그를 개발 하였다. 결과는 다음과 같다. 개발 목표는 PCB기판 세척시 불량률을 줄이는 것으로 기존 침전식에서, 원심력을 이용한 회전형으로 개발, 세척액에 따른 기판손상을 80%이상 줄이는 결과를 얻었다. 회전식에 따른 세척할 수 있는 수량이 제한된 단점을 베이스플레이트에서 PCB기판의 용이한 탈부착이 가능하도록 설계 기존 방법의 세척 후 공정을 포함한 시간과 비교하여 큰 차이를 보이지 않았으며. 기존 시간과 비교하여 세척시간을 90%까지 높였다. 세척용 회전 지그에 고정된 PCB기판이 원심력에 의해 이탈현상 없이 고정력을 효과적으로 유지 할 수 있도록 설계함으로써, 세척공정의 안정성 및 신뢰성을 확보하여 불량률을 1% 미만으로 개선 할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.179-182
• /
• 2003

This paper describes the design and implementation of PLC home network system using HNCP ver.1.0. The developed home network system comprises a home server progranL a home master, and appliance emulators (e.g., for washing machine, microwave oven, and air-conditioner). Throughout the implementation of PLC home network system, the feasibility of HNCP ver.1.0 is verified.

• 한국농공학회논문집
• /
• 제64권6호
• /
• pp.77-86
• /
• 2022

Various odor reduction systems are being operated at pig houses to improve livestock odor issues. However, the quantitative evaluation of odor reduction efficiency is not sufficiently conducted. The analysis of factors that affect the reduction efficiency also has not been sufficiently conducted. Therefore, in this study, the reduction efficiency of representative odor reduction facilities (bio-curtain, scrubber) operated by domestic pig houses was evaluated. The odor reduction efficiency was evaluated by sampling the air before and after the odor reduction facility in 6 pig houses. Livestock odors were evaluated for complex odors, ammonia, hydrogen sulfide, and VOC. To find factors for reduction efficiency, temperature, humidity, pH of washing resolution, type of washing water, and ventilation rate was measured. As a result, it was found that the scrubber system had the highest reduction efficiency. The reduction efficiency was found to be affected by the scrubber's washing resolution, filler, operating conditions, and size. Bio-curtains may have problems such as deterioration of fan performance due to ventilation fan load, groundwater pollution, and excessive use of groundwater.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1978년도 추계학술대회
• /
• pp.209.1-209
• /
• 1978

Treatment of domestic sewage discharged from big cafeteria kitchen, especially rice-washing water, was examined by the use of activated sludge process and phytoplankton cultivation. Only with a activated sludge process COD value decreased from around 1000 mg/ι to 100 mg/ι, but nutrients, such as nitrogen and phosphate could not be removed sufficiently phytoplankton cultivation in combination with a activate sludge process could decrease COD value down to 50 mg/ι and nutrients values were also reduced substantially. However, the initial concentration of 20 mg/ι in the rice-washing water could not be removed completely without addition of activated sludge as a nitrogen source.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.266-271
• /
• 2003

The numerical study was carried out to effectively cool Induction motor applied to a washing machine. The outer rotor made of steel periodically spins up and down. The stator consists of the thin layered iron plates and copper coil. The effective cooling system is necessary to solve the reliability problem caused by the electric losses at the coil and the iron plate. Because the heat transfer rate of the natural convection in partially open space is generally low, thus it is necessary to enhance the heat transfer using rotating perforated plate. The flow phenomena around the motor are very complex due to the motor geometry and the outer rotor motion. The mixed convection takes place due to the slow rotation speed. The three dimensional flow simulation was performed using rotating reference frame technique and Boussinesq approximation but the radiation effect was neglected. It was found that the angle and direction of the cooling blades play an important role in the stator temperature.

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.601-608
• /
• 2007

To meet demand of big capacity and high speed rotation for washing machine, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Because section of flange has various design factors according to configuration of flange, the optimum conditions can’t be easily determined. Using a design of experiment (DOE), this study was performed investigating the interaction effect between factors as well as the main effect of the each design factor under bending and twist and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.792-801
• /
• 1996

A thinning algorithm -based image analysis technique was developed to measure corn root lengths. The root length measurement method was evaluated by comparing thread lengths measured by the image analysis system with actual thread lengths. The length measurement method accurately estimated actual thread lengths (less than 2% calculated error). Also, a rapid root length density measurement procedure, which utilizes the above root length measurement method, was developed to estimate corn root length density without washing the roots. Root length densities estimated from the cut soil surface of core samples taken from the field were paired with the root length densities determined from washed roots from the same soil core sample. A linear relationship between these two values was expected and was found. Eliminating the root washing procedure reduces the time required for measuring corn root length density substantially.

• 한국염색가공학회지
• /
• 제5권4호
• /
• pp.1-9
• /
• 1993

The Cotton fabric was dyed with various directd dyes, and then treated with copper sulfate or copper sulfate/thiourea. Munsell color system, dye exhaustion, tensile strength, light fastness, washing fastness and rubbing fastness were investigated for the treated fabrics. The results obtaind are as follows: 1. The color variation of the cotton-dyed fabric by aftertreatment with copper sulfate was shown redish, but original color with copper sulfate/thiourea. 2. Copper sulfate/thiourea was much more effective than copper sulfate only to increase the light fastness, washing fastness and rubbing fastness. 3. Dye exhaustion of the cotton-dyed fabric by aftertreatment with copper sulfate was decreased about 20% more than those of untreated. 4. Tensile stregth of cotton-dyed fabric by aftertreatment with copper sulfate/thiourea was decrease about 10% more than those of untreated.