• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.2
• /
• pp.103-109
• /
• 2016

Efficacy of cosmetics has been mainly evaluated by qualitative and quantitative methods based on visual sense, tactile sense and skin structure until now. In this study, we suggested a novel evaluation method for skin status based on sound; measuring and analyzing the rubbing noise generated by applying cosmetics. First, the rubbing noise was measured at a close range by a high-sensitivity microphone in anechoic environment, and the noises were analyzed by 1/3 octave band analysis in frequency-domain. Three conditions, 1) before washing, 2) after washing and 3) after application of cosmetics, were compared. As a result, sound pressure level (SPL) of rubbing noise after washing was larger than that of before washing, and the SPL of rubbing noise after cosmetic application was the smallest. Furthermore, the energy of rubbing noise after application was higher than that of the before and after washing conditions in a low frequency band (lower than 2 kHz region). Conversely, the energy of rubbing noise after application was much lower than the others in a high-frequency band (upper than 2 kHz region). This change of energy distribution was described as a balloon-skin model. High SPL in the low frequency region after the cosmetic applications was due to the increase of "flexibility index", while SPL in the high frequency region significantly decreased because of the attenuation which is related to "softness index". Therefore, we developed two indices based on the spectrum-energy difference for evaluating skin conditions. This proposed method and indices were verified via skin flexibility and roughness measurement using cutometer and primos respectively. These results suggest that acoustic measurement of skin friction noise may be a new skin status evaluation method.

• Journal of Korean Biological Nursing Science
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2011

Purpose: The purpose of this study was to analyze effects of hand drying methods after hand-washing. Hand drying methods consisted of spontaneous evaporation, paper towel, hand dryer with rubbing, and hand dryer without rubbing. Methods: The research design was a crossover design. The subjects were eighteen university students and randomly assigned in four group. Each group had the schedule of treatment. The schedule tested one drying method per a day and proceeded for 4 days. The data collection was performed from July 27 to July 30, 2010. Data were analyzed by Kruskal-Wallis, Mann-Whitney and Wilcoxon test. Results: There was significant difference between the after CFU between natural dry, paper towel, air dryer with hand rubbing, and air dryer without hand rubbing(p=.006). The after CFUs of paper towel, natural dry and air dryer without hand rubbing groups were statistically less than air dryer with hand rubbing group. Conclusion: It was shown that the paper towel, spontaneous evaporation and without rubbing hand dryer are effective hand drying interventions on reducing CFU on hand. However additional researches with large sample and strict methodology are needed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.58-66
• /
• 1997

In order to evaluate the exact effect of detergency it is necessary both to measure the actual soil content by chemical analysis and to determine the degree of soil removal visually. Since it takes considerable time and effort to use both methods, usually one of the two methods is used. Many studies have been carried out through increasing the visibility of oily soil to evaluate detergency by measuring reflectance of fabrics. In this study Sudan Black B, an oil soluble dye was used as an indicator to increase the visibility of oily soil on cotton and polyester fabrics. The condition of artificially soiled fabrics and the method of evaluating detergency were investigated which represent the actual detergency of oily soil by measuring the reflectance only. Also the detergency of Sudan Black B and that of oily soil were compared with each other under various washing conditions, As a result, the K/S values converted from the reflectances showed a good correlation with the actual soil content. Linear relationship between K/S value and the actual soil content was obtained. The K/S values of washed fabrics were higher than those of unwashed fabrics which included same content of soil since the soil visibility changed during washing. But the difference was small when Sudan Black B was used. With the increase of soil content, detergency of cotton fabric decreased, but detergency of polyester fabric increased gradually. With regards to soiled fabrics, detergency of cotton fabric measured by K/S value was close to that of actual oily soil when Sudan black B was used as an indicator.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.276-283
• /
• 2017

The aim of this study is to develop an effective dyeing process for black color on the silk fabrics, using natural Indigo, Madder, Amur cork tree, Alder, Logwood, and Gallnut. All natural dye materials were water-extracted, concentrated, and freeze-dried. Seven different processes were carried out and the color differences(${\Delta}E$) of black color with each process from the chemical black dyed fabric were compared. The light, washing, and rubbing fastness were evaluated. The black dyeing of the silk fabrics was well carried and excellent black color was obtained in every methods. The profound black color could be obtained by the subtractive mixture of the three primary colors of red, yellow, and blue in the order of indigo(blue) - amur cork tree(yellow) - madder or lac(red). Black color was efficiently obtained by iron mordant when logwood or alder fruit was used. The color difference(${\Delta}E$) from the black color with chemical dyestuff was the lowest in the indigo - amur cork tree - lac - iron method. Light fastness and washing fastness were excellent in all dyeing processes, showing grade 5. The fastness to rubbing was excellent as shown grade 5 in the dry samples of logwood - iron process and alder fruit - iron process.

• Journal of Sasang Constitutional Medicine
• /
• v.22 no.3
• /
• pp.132-140
• /
• 2010

1. Objective: To compare the contents and transfer rate of hazardous substances in crude, washing solution, crude after washing, decoction and remnant after boiling. 2. Methods: The heavy metal contents of each step were measured by inductively coupled plasma mass spectrometer (ICP-MS) and mercury analyzer (MA-2). In order to analyze pesticides in each sample we used simultaneous multi-residue analysis of pesticides by GC/ECD, which was followed by GC/MSD analysis to confirm the identity of the detected pesticide in each sample. In addition, the contents of sulfur dioxide (SO2) were performed by Monier-Williams distillation method. 3. Results: 1) Contents (mg/kg) of heavy metals in decoction of all herbal medicine prescriptions were not detected. 2) Transfer rates (%) of heavy metals from crude to remnant were As (83.3%), Cd (100.0%), Pb (182.6%) and Hg (100.0%). 3) Contents (mg/kg) of residual pesticides were not detected. 4) Transfer rate (%) of sulfur dioxide (SO2) from crude to remnant was 44.2%. 4. Conclusion: Our results showed that boiled herbal medicine prescriptions which we take is safe from the hazardous substances.

• Korean Journal of Human Ecology
• /
• v.6 no.2
• /
• pp.115-120
• /
• 1997

To investigate the cognition of labeling system and its problems, problems in laundry, and consumer's dissatisfaction and to decrease problems in management of clothing products, total 476 subjects were surveyed in Taejon. The major results were as follows ; 1. The cognition of labeling system was understood by 93.1% of respondents, and 72.9% of them prefer to recognized labeling by figures and letters than by either of them. Most of respondents got the knowledge of labeling system from school. The most frequently experienced mislabeling was the label for management. 2. In cleaning, 60.4% of respondents made their decisions of the laundry method after seeing labeling system. When the label recommanded either of hand washing or dry cleaning, they usually laundered with hand washing after a few times of dry cleaning. The first consideration factor for laundry was fiber composition of textiles. 3. About 70% of respondents understood ironing, laundry, and drying mark on labeling system, and 53.8% understood fiber composition and bleaching. 4. More than 90% of respondents experienced dissatisfaction in handling clothing products. The reason of dissatisfaction was deformation and decoloring after laundry. Most of respondents experienced change of tactile sensation, too.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1315-1322
• /
• 2010

A membrane bioreactor (MBR) was designed using polyvinylidene fluoride(PVDF)-type hollow fiber membrane modules with a treatment capacity of 10 ton/day. A pilot plant was installed in a sewage treatment plant and was operated with an intermittent aeration method which avoids any concentration gradient of suspended solids (SS) in the MBR. For continuous operation, the pilot plant was first tested with influent (mixed liquor suspended solid:MLSS of 1000-2000 mg/L) of aeration tanks in the sewage treatment plant. The MBR was pre-treated with washing water, 10% ethanol solution, 5% NaOCl solution and finally washing water, one after another. To demonstrate the effect of the MBR on sewage treatment, compared with conventional activated sludge processes, we investigated the relationships among permeate amount (LMH), change in operation conditions, influent MLSS level and sludge production. It was found that the optimum aeration rate and suction pressure were $0.3\;m^3$/min and 30~31 cmHg, respectively. Under stable conditions in aeration, suction pressure, influent flow rate and drainage, the SS removal efficiency was more than 99.99% even when the MLSS loading rate changes. Compared with conventional activated sludge processes, the MBR was more effective in cost reduction by 27% based on permeate amount and by 51.5% on sludge production.

• Carbon letters
• /
• v.3 no.4
• /
• pp.198-204
• /
• 2002

In this paper, impregnated activated carbon fiber (IACF) was manufactured to pitch-based activated carbon fibers (ACF) with potassium hydroxide (KOH) by using wet impregnation method to raise nitrogen oxides ($NO_x$) adsorptivity. The properties of IACF were observed using EPMA, TGA and DSC and $NO_x$ adsorptivity was observed at high and low temperature. Before and after adsorption was analyzed using ToF-SIMS for examine surface characterization of adsorbed $NO_x$. The results showed that the better adsorptivity appeared for increasing KOH ratio. So, $NO_x$ adsorptivity showed result that is proportional between KOH and the adsorbed amount. On the other hand, adsorbent that manufactured without washing was better $NO_x$ adsorptivity than adsorbent that manufactured with washing. The behavior of adsorption show that crossing time of NO and $NO_2$ delayed for a rising adsorptivity. And NO ratio increased but $NO_2$ ratio decreased according as KOH ratio increases. $NO_x$ was confirmed through surface analysis that remain in $NO_2^-$ and $NO_3^-$ form on IACF surface.

• Korean Journal of Poultry Science
• /
• v.20 no.1
• /
• pp.33-41
• /
• 1993

Among the several factors that affect shelf-life of washed shell eggs, storage temperature and relative humidity were the most important. Besides those factors listed above, temperature of washing water, composition of foreign substances and washing method of eggs were also the factors affecting the shelf-life of the eggs. The effect of sanitizer treatment was significant in extending the shelf-life of eggs compared with washed and unwashed eggs. In case of oil coating treatment, the shell eggs treated showed the better results than that of washed and unwashed eggs because the coating materials prevented the moisture evaporation from the inner shell eggs and kept the contamination of microorganisms from the environment. Consequently, it is considered that reducing egg shell contamination of microorganisms and proper treatment could be the key to extend the shelf-life of shell eggs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.3
• /
• pp.17-26
• /
• 2005

The random pulse width modulation(RPWM) in inverter-fed induction motor drive is presented. This paper describes a RPWM method based on space vector PWM strategy for shaping the switching noise spectrum in such a way it can merge with the natural system noise. To verify the validity of the proposed RPWM scheme, the experiment based on the DSP56F803 microprocessor was executed finally, the simulation and experimental results will be given to demonstrate the effectiveness of the unposed RPWM scheme.