• Journal of Korean Medical Science
• /
• v.33 no.46
• /
• pp.288.1-288.12
• /
• 2018

Background: Diarrheal and intestinal infectious disease caused by inadequate drinking water, sanitation, and hygiene (WASH) is not only a great concern in developing countries but also a problem in low-income populations and rural areas in developed countries. In this study, we assessed the exposure to inadequate WASH in Korea and estimated the burden of disease attributable to inadequate WASH. Methods: We used observational data on water supply, drinking water, sewage treatment rate, and hand washing to assess inadequate WASH conditions in Korea, and estimated the level of exposure in the entire population. The disease burden was estimated by applying the cause of death data from death registry and the morbidity data from the national health insurance to the population attributable fraction (PAF) for the disease caused by inappropriate WASH. Results: In 2013, 1.4% of the population were exposed to inadequate drinking water, and 1.0% were living in areas where sewerage was not connected. The frequency of handwashing with soap after contact with excreta was 23.5%. The PAF due to inadequate WASH as a cluster of risk factors was 0.353 (95% confidence interval [CI], 0.275-0.417), among which over 90% were attributable to hand hygiene factors that were significantly worse than those in American and European high-income countries. Conclusion: The level of hand hygiene in Korea has yet to be improved to the extent that it shows a significant difference compared to other high-income countries. Therefore, improving the current situation in Korea requires a continuous hand washing campaign and a program aimed at all people. In addition, continuous policy intervention for improvement of sewage treatment facilities in rural areas is required, and water quality control monitoring should be continuously carried out.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.104-113
• /
• 2020

Bubble size in froth flotation has long been recognized as a key factor which affects the bubble residence time, the bubble surface area flux (Sb) and the carrying rate (Cr). This paper presents method of bubble size measurement, relationship between operating variables and gas dispersion properties in flotation column. Using high speed camera and image analysis system, bubble size has been directly measured as a function of operating parameters (e.g., superficial gas rate (Jg), superficial wash water rate (Jw), frother concentration) in flotation column. Relationship compared to measured and estimated bubble size was obtained within error ranges of ±15~20% and mean bubble size was 0.718mm. From this system the empirical relationship to control the bubble size and distribution has been developed under operating conditions such as Jg of 0.65~1.3cm/s, Jw of 0.13~0.52cm/s and frother concentration of 60~200ppm. Surface tension and bubble size decreased as frother concentration increased. It seemed that critical coalescence concentration (CCC) of bubbles was 200ppm so that surface tension was the lowest (49.24mN/m) at frother concentration of 200ppm. Bubble size tend to increase when superficial gas rate (Jg) decreases and superficial wash water rate Jw and frother concentration increase. Gas holdup is proportional to superficial gas rate as well as frother concentration and superficial wash water rate (at the fixed superficial gas rate).

• FOCUS: LIFE SCIENCE
• /
• no.1
• /
• pp.5.1-5.3
• /
• 2024

The document discusses the regeneration of Partisil/Partisphere ion-exchange columns in chromatography. It mentions that column efficiency can diminish with use due to the accumulation of sample and/or mobile phase impurities at the head of the column. This can lead to a change in back pressure, lower column efficiency, and sometimes a change in selectivity. The document outlines a procedure that may restore column performance. The document also provides everyday practices to enhance the lifetime of a column. These include using only high-purity HPLC solvents and buffers, using freshly prepared mobile phases and buffers, filtering mobile phases to remove particulates, using appropriate sample clean-up procedures, using a guard column or pre-column filter, and working within the pressure and flow rate limitations of the column. For the regeneration of Partisil/Partisphere SAX, SCX, WAX, and WCX columns, the document suggests passing 20 column volumes of various mobile phases through the column. These include a buffer wash, distilled water, an acid wash, a chelating wash, a methanol wash, and a buffer for separation. The document emphasizes that not all of these wash steps are required for every column clean-up and that some chromatographers require only a combination of certain steps.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.490-496
• /
• 1996

This study was undertaken in order to elucidate the elimination of phenthoate residues by washing and cooking processes of rice which if the most important food crop in Korea. When contaminated rice was washed with distilled water three times, the removal rate of total phenthoate was 51%. The removal rate in the successive washings was 37.3% (wash filtrate 7.8%, wash sediment 29.5%) in the first, 14.3% (wash filtrate 6.2%, wash sediment 8.1%) in the second and 8.9% (wash filtrate 5.8%, wash sediment 3.1%) in the third washings. More than half of the residue was removed by the first washing and most residues were found in the sediment rather than in the filtrate of the rice washings. The residue rate of phenthoate after cooking by an electric rice cooker was 41%, indicating that the removal rate after cooking was 59%, because phenthoate is thermally stable at the cooking temperature. In conclusion, phenthoate residues contaminated in rice grains are grcatly removed in the washing process and it is desirable to wash the grains before cooking in order to decrease the hazards from pesticide residues such as phenthoate. Reduction factor of phenthoate in rice cooking is proposed to be 0.4.

• Textile Coloration and Finishing
• /
• v.22 no.2
• /
• pp.110-117
• /
• 2010

Recently, there is a trend to utilize natural dyes in many dyeing fields. In this work, the effects of benzyl alcohol in human hair dyeing with cochineal, a natural dye, was investigated. We investigated the K/S value and color value of dyed hair, water retention of dyed hair, protein release-ability of dyed hair, and wash fastness of dyed hair according to dyeing time and temperature. The shade of dyed hair was reddish. By adding benzyl alcohol in cochineal dyeing, the dyeing rate was increased and the dyeing equilibrium was established at early stage. The water retention of dyed hair was increased and the protein release-ability of dyed hair was decreased, meaning that the hair was less damaged during dyeing, The dyed hair showed a good wash fastness.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.61-68
• /
• 2020

In this study, the international standard ISO TS 16774 Part 3 Test Method for Water (wash out) Resistance and KS F 4935 ｢Sealant Injection type for water leakage maintenance of adhesive flexible rubber asphalt series｣, which are standardized as a quality control method of injection type repair materials used for water leakage cracks in underground concrete structures, are currently used in Korea. As a result, considering the performance criteria of "mass change rate -0.1%" stipulated in KS F 4935, the remaining 13 types repair materials, excluding RG-2 of synthetic rubber and UG-1 of urethane, need to be reviewed for stabilization of the loss resistance due to the flow of ground water. The results of this study are determined to be available as a basic indicator for the selection of repair materials used for cracks in concrete structures. In addition, it is expected that the results of this study can be utilized as reference data that can be reflected in the improvement of the quality of repair materials that will be researched and developed later.

• Journal of Food Hygiene and Safety
• /
• v.8 no.2
• /
• pp.13-21
• /
• 1993

Vibrio septicemia,, resulting in high mortality, has been caused by Vibrio vulnificus. Ingestion of marine products or contact with sea water contaminated with Vibrio vulnificus can cause septicemia. Vibrio vulnificus has been detected world wide and west sea area of Korea, Kum river estuary in particular, showed high detection rate. Higher detection rate of Vibrio vulnificus were reported in the bottom deposit with low depth of water, low salinity, and high COD. Man with the liver disease can easily come down with Vibrio septicemia and the main source is the sliced raw fish dish. The preventive measure for this disease is to wash raw fish material thoroughly with tap water and handle in sanitary conditions. Washing with sea water is strictly prohibited . It may be necessary to forbid the small-scale businessmen from selling the sliced ray fish dish in the vicinity of seashore. Man with the liver disease of diabetes should not swim or consume the raw fish dish in the contaminated area during summer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1589-1597
• /
• 2006

Nowadays, Korean consumers prefer drum-type washing machines to pulsator-type washers. Washing is a complex process involving the interaction of numerous physical and chemical influences. The main factors in the washing operations are the washing chemistry of the detergent along with the mechanical input, the wash temperature, and the time provided by the washing machine. Heavy-duty detergents that are used in drum-type washing machines contain different components from those used in vertical-axis washing machines. The bath ratio and the mechanical actions to which laundry is subjected are different between the drum-type and the vertical-axis washing machines. In this study we examined the effects of wash temperature, wash time, detergent concentration, and revolution speed on the removal of soils from artificially soiled cloths in a drum-type washing machine with heavy-duty commercial detergent. We used multiple regression analyses to find the relative importance of the factors and the optimum washing conditions. The results of these experiments showed that the washing temperature was the most important factor in the effective removal of most soils. This was followed by the washing time, the detergent concentration, and finally the revolution speed. In this study it was found that superfluous amounts of detergent did not sufficiently increase the soil removal rate. Koreans who are used to washing with cold water should increase the wash time to launder more efficiently.

• Resources Recycling
• /
• v.23 no.5
• /
• pp.36-43
• /
• 2014

It comtained various kinds of heavy metal in beneficiatian tailing and in order to eliminate the heavy metals, various technologies have been researched, But there are a limits because many problems and restrictions are accompanied. Therefore, in this study, in order to solve this problem, It was performed gravity separation using melti-gravity seperator (MGS) to remove As contained in tailing, which can sort out even the fine particle. It was attempted a study to remove As, which is a kind of heavy metals, by MGS gravity separation and verified the impact by slope, wash water, pulp density, rotational speed and feed rate. In the results of performing gravity concentration under the condition with the MGS slope of $3^{\circ}$, wash water of 5 l/mm, pulp density of 30%, rotational speed of 208 rpm, and the feed rate of 265.24 g/mm, the As removal rate of 88.21% and yield of 92.25% were obtained.

• Water for future
• /
• v.10 no.2
• /
• pp.91-100
• /
• 1977

This is an experimental study to raise higher efficiency of filteration than conve ntional filteration by increasing of filteration capacity for per unit area and by extending of filteration lasting time with biflow filter system which was improved from the conventional rapid sand filteration method in the process of water purification treatment. In order to raise more efficient function of filteration and giving consideration to the filter layer at upper and lower parts of the filter, the fine sand & an thracite were used as a filter medium. Although there is some difficulty than previous fine sand in procurement, it could confirm that such filter medium (fine sand & anthracite) was more effective in the field of load, lasting time and back wash, etc. In consideration of practical effect of filteration. The raw water which was used for this experimental study was not coagulated. As a result of this experiment, the filteration volume could increase more than 2 times than that of conventional method. Besides, much more advantages could be obtained for instance, the requirement of installation area was not much and installation cost could economize. On the other hand, the following results were found. The quality of filtered water became worse as time goes by and the turbidity of filtered water was more influenced by raw water turbidity than by rate of filteration. Lasting time of filteration on change of filteration rate in the filter layer reached 2 times in comparison with previous filter basin, and until loss gead reached to 1.0 meter and 1.5 meter, the following relate formulas between lasting time and rate of filteration were formed. ($T_{1.5}=181.96V^{-0.46},\;T_{1.0}=121.31V^{-0.46}$) Even though the lasting time can be shorten in case of the increase of the filteration rate, but the lasting time was prolonged more than 2 times than of previous method. With taking aim at contribution to the development of water treatment technique, we are planning to study continuously for the future study basing on the results in this papers.