• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.663-668
• /
• 2007

An enhanced first shear deformation theory for composite plate is developed. The detailed process is as follows. Firstly, the theory is formulated by modifying higher order zigzag theory. That is, the higher order theory is separated into the warping function representing the higher order terms and lower order terms. Secondly, the relationships between higher order zig-zag field and averaged first shear deformation field based on the Reissner-Mindlin's plate theory are derived. Lastly, the effective shear modulus is calculated by minimizing error between higher order energy and first order energy. Then the governing equation of FSDT is solved by substituting shear modulus into effective shear modulus. The recovery processing with the nodal unknown obtained from governing equation is performed. The accuracy of the present proposed theory is demonstrated through numerical examples. The proposed method will serve as a powerful tool in the prediction of laminated composite plate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.89-92
• /
• 2002

In this paper we present a barcode reader to decode two-dimensional symbology PDF-417 and propose a novel method to extract the bar-space patterns directly from the gray-level barcode image, which employs the location and the distance between extreme points of each row of the barcode image. This algorithm proves to be very robust from the high convolution distortion environments such as defocussing and warping, even under badly illuminating condition. If the scanned barcode image is a result of the convolution of a Gaussian-shaped point spread function with a bi-level image, popular image segmentation methods such as image thresholding can not distinguish between very narrow bar-space patterns with a couple of pixels wide. The proposed algorithm shows improved performance over current barcode readers.

• Kyungpook Mathematical Journal
• /
• 제56권3호
• /
• pp.965-977
• /
• 2016

The aim of this paper is to study the geometry of contact CR-warped product submanifolds in a cosymplectic manifold. We search several fundamental properties of contact CR-warped product submanifolds in a cosymplectic manifold. We also give necessary and sufficient conditions for a submanifold in a cosymplectic manifold to be contact CR-(warped) product submanifold. After then we establish a general inequality between the warping function and the second fundamental for a contact CR-warped product submanifold in a cosymplectic manifold and consider contact CR-warped product submanifold in a cosymplectic manifold which satisfy the equality case of the inequality and some new results are obtained.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (하)
• /
• pp.879-882
• /
• 2000

화자종속 음성인식 시스템은 훈련 데이터가 화자들 사이의 음향적 변이를 충분히 모델링 할 수 있을 때, 화자독립 시스템보다 더 성능이 졸은 것으로 알려져 있다. 화자 정규화 기술은 입력음성의 스펙트럼을 수정하여 화자들 사이의 변이를 줄인다. 최근 성공적인 화자 정규화 알고리즘은 신호처리단계에 화자 특유 주파수 워핑을 통합했다. 이런 알고리즘은 입력음성에 담겨있는 음향적 특징을 다 사용하지 않는다. 본 논문에서는 화자의 음향적 특징으로 세 개의 포만트 주파수를 이용하였고, 수집된 포만트 주파수들로부터 워핑함수를 정의하는데 선형회귀를 사용한 화자 정규화 방법을 제안한다. 이 방법을 사용하여 인식 성능을 향상할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.239-240
• /
• 2012

With advancements in semiconductor device technologies, manufacturing processes are getting more complex and it became more difficult to maintain tighter process control. As the number of processing step increased for fabricating complex chip structure, potential fault inducing factors are prevail and their allowable margins are continuously reduced. Therefore, one of the key to success in semiconductor manufacturing is highly accurate and fast fault detection and classification at each stage to reduce any undesired variation and identify the cause of the fault. Sensors in the equipment are used to monitor the state of the process. The idea is that whenever there is a fault in the process, it appears as some variation in the output from any of the sensors monitoring the process. These sensors may refer to information about pressure, RF power or gas flow and etc. in the equipment. By relating the data from these sensors to the process condition, any abnormality in the process can be identified, but it still holds some degree of certainty. Our hypothesis in this research is to capture the features of equipment condition data from healthy process library. We can use the health data as a reference for upcoming processes and this is made possible by mathematically modeling of the acquired data. In this work we demonstrate the use of recurrent neural network (RNN) has been used. RNN is a dynamic neural network that makes the output as a function of previous inputs. In our case we have etch equipment tool set data, consisting of 22 parameters and 9 runs. This data was first synchronized using the Dynamic Time Warping (DTW) algorithm. The synchronized data from the sensors in the form of time series is then provided to RNN which trains and restructures itself according to the input and then predicts a value, one step ahead in time, which depends on the past values of data. Eight runs of process data were used to train the network, while in order to check the performance of the network, one run was used as a test input. Next, a mean squared error based probability generating function was used to assign probability of fault in each parameter by comparing the predicted and actual values of the data. In the future we will make use of the Bayesian Networks to classify the detected faults. Bayesian Networks use directed acyclic graphs that relate different parameters through their conditional dependencies in order to find inference among them. The relationships between parameters from the data will be used to generate the structure of Bayesian Network and then posterior probability of different faults will be calculated using inference algorithms.

• 정보처리학회논문지B
• /
• 제15B권5호
• /
• pp.477-486
• /
• 2008

얼굴의 기하학적 특징이 변하여 생기는 표정은 얼굴 인식 시스템의 인식 결과에 다양한 영향을 끼친다. 얼굴 인식율을 개선하기 위해 본 연구에서는 인식 대상 얼굴과 참조 얼굴 사이의 표정 차이를 줄이는 방법으로 얼굴 표정 정규화를 제안한다. 본 연구에서는 대형의 이미지 데이터베이스를 구축하지 않고도 한 개의 정지 이미지에 일반적인 얼굴 근육 모델을 이용하는 접근 방식을 제시하여 얼굴 표정 모델링과 정규화를 처리한다. 첫 번째 방식은 본능적으로 변하는 얼굴 표정의 생물학적 모델을 구축하기 위해 선형 근육 모델의 기하학적 계수를 예측하는 것이다. 두 번째 방식은 RBF(Radial Basis Function)기반의 보간과 와핑을 통해 주어진 표정에 따라 얼굴 근육 모델을 무표정한 얼굴로 정규화한 것이다. 실험 결과, 기저얼굴 방식, 지역 이진 패턴 방식, 회색조 상관측정 방식과 같은 얼굴 인식 과정의 전처리 단계로 본 연구의 표정 정규화 과정을 적용하면 정규화를 거치지 않은 것보다 더 높은 인식율을 보인다.

• 소성∙가공
• /
• 제23권6호
• /
• pp.369-375
• /
• 2014

Flexible roll forming allows profiles to have variable cross-sections. However, the profile may have some shape errors, such as, warping which is a major defect. The shape error is induced by geometrical deviations in both the concave zone and the convex zone. In the current study, flexible roll forming was modeled with FE simulations to analyze the shape error and the longitudinal strain distribution along the flange section over the profile. A distribution of analytically calculated longitudinal strains was used to develop relationships between the shape error and the longitudinal strain distribution as a function of the defined shape parameters for the profile. The FE simulations showed that the shape error is primarily affected by the deviations between the distribution of analytically calculated longitudinal strain and the longitudinal strain distribution of the profile. The results show that the shape error can be controlled by designing the shape parameters to control the geometrical deviations at the flange section in the transition zones.

• Composites Research
• /
• 제15권3호
• /
• pp.18-29
• /
• 2002

본 논문에서는 얇은 벽보로 모델링 한 위성체 구조물에 입사되는 열 하중에 의해 발생하는 굽힘 진동과 열적 플러터에 대하여 연구하였다. 복합재료 얇은 벽보는 회전관성과 1차, 2차 와핑, 전단변형의 비고전적 요소를 포함한다. CUS구조물로 모델링한 복합재료 얇은 벽보의 열 진동 특성은 적층 순서와 섬유강화복합재료의 방향특성인자로부터 기인된 종방향 굽힘과 횡방향 굽힘의 언성과 관련하여 연구되었다. 수치 해석적인 방법으로 열적 플러터의 안정성 영역의경계값을 구하였으며, 태양 열 플럭스의 입사각, 감쇠계수, 섬유각의 변화에 의한 보의 변위를 구하였다. 주 구조물에 압전소자를 부착하여, 감지기와 작동기로 사용하여 제어해석을 수행하였다.

• 한국컴퓨터산업학회논문지
• /
• 제4권4호
• /
• pp.613-624
• /
• 2003

본 논문은 우선순위 큐와 접미어 트리로 색인 구조를 생성한 후. 이미지 시퀀스 데이터베이스에서 다차원 타임 워핑 거리 함수를 이용하여 유사한 이미지 서브시퀀스를 신속하고 정확하게 검색할 수 있는 방법을 제안한다. 본 논문에서 제안된 방법은 사전에 정의된 중요도에 따라 선별된 이미지 시퀀스로 구성된 우선순위 큐 색인의 이미지 서브시퀀스에 대한 유사성 거리 계산을 첫 단계로 시행하여 유사한 서브시퀀스집합을 얻고 만족할 결과를 얻지 못했을 경우에는 두 번째 단계로 나머지 유사 서브시퀀스에 대해 디스크 기반의 접미어 트리를 색인 구조체로 하여 유사한 서브시퀀스를 검색하는 것이다. 하한 거리 함수를 활용하여 질의 이미지 시퀀스와 유사한 이미지 서브시퀀스를 검색하는 과정에서 생성 가능한 오류를 방지 하면서 동시에 비 유사 이미지 서브시퀀스를 제거하도록 한다.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.15-21
• /
• 2013

In this paper, sensor system and inspection algorithm in order to inspect steel balance weight for automobile is described. Steel balance weight is composed of clip and weight, which is joined by press process. The defective one has a gap between clip and weight. To detect whether there is a gap, sensor system is simply configured with laser line projector and USB camera, which make it possible to measure the height difference of clip and weight area. Laser line pattern which is made on the surface of a balance weight is captured by USB camera. In case that USB camera is used in machine vision, barrel distortion caused by wide angle lens makes the captured image distorted. Image warping function is applied to correct the distortion. Simple image processing algorithm is applied to extract the laser line information and whether it is good or not is judged through the extracted information.