• 대한한방부인과학회지
• /
• 제20권2호
• /
• pp.124-138
• /
• 2007

Purpose: This study was conducted to investigate the antimicrobial effects of the interior warming herbs on vaginal microbes. Methods: Staphylococcus aureus, Methicillin-resistant Staphylococcus aureus, Candida albicans and Gardnerella vaginalis were used for vaginitis-induced microbes. Lactobacillus gasseri, Streptococcus spp. and Escherichia coli HB101 were used for normal vaginal florae. And herbs for warming the interior (Zingiberis Rhizoma, Alpiniae Officinari Rhizoma, Aconiti Tuber, Anethi Fructus, Evodiae Fructus, Cinnamomi Cortex Spissus, Caryophylli Flos, Aconiti Tube, Zanthoxyli Pericarpium, Piperis Longi Fructus, Piperis Nigri Fructus) were used in this study. Antimicrobial activities were tested by the change of optical densities (OD) and colony test in vitro. Results: In the results of vaginitis-induced microbes, Anethi Fructus was decreased the OD values on MRSA and Gardnerella vaginalis and Aconiti Tuber was decreased on MRSA. There were no viable MRSA and Gardnerella vaginalis colony forming against Evodiae Fructus, Staphylococcus aureus and MRSA colony forming against Piperis Longi Fructus, Staphylococcus aureus colony forming against Piperis Nigri Fructus and MRSA colony forming against Zanthoxyli Pericarpium. In the results of normal vaginal florae, Zingiberis Rhizoma was decreased the OD values on Streptococcus spp. and all normal vaginal florae were showed viable colony forming against all experimental herbs. Conclusion: According to these results, we can suggest that some kinds of interior warming herbs have antimicrobial effects on vaginal microbes. So there might be needed to make furthermore studies to seek the herbs which have selective antimicrobial effect on pathologic vaginal microbes.

• 소성∙가공
• /
• 제32권6호
• /
• pp.311-320
• /
• 2023

Recently, lightweight of automotive parts has been required to solve environmental problems caused by global warming. Accordingly, research and development are proceeded on manufacturing of parts using aluminum that can replace steel for lightweight of the automotive parts. In addition, high strength aluminum can be applied to body parts in order to meet both requirements of lightening and improving crash safety of vehicle. In this study, hot blow forming of roof side rail is employed to manufacturing of the automotive parts with high strength aluminum tube. In hot blow forming, longer forming times and excessive thinning can be occurred as compared with conventional manufacturing processes. So optimization of process conditions is required to prevent excessive thinning and to uniformize thickness distribution with fast forming time. Mechanical properties of high strength aluminum are obtained from tensile test at high temperature. These properties are used for finite element(FE) analysis to investigate the effect of strain rate on thinning and thickness distribution. Variation of thickness was firstly investigated from the result of FE analysis according to tube diameter, where the shapes at cross section of roof side rail are compared with allowable dimensional tolerance. Effective tube diameter is determined when fracture and wrinkle are not occurred during hot blow forming. Also FE analysis with various pressure-time profiles is performed to investigate the their effects on thinning and thickness distribution which is quantitatively verified with thinning factor. As a results, optimal process conditions can be determined for the manufacturing of roof side rail using high strength aluminum.

• ALGAE
• /
• 제31권1호
• /
• pp.49-59
• /
• 2016

Ulva pertusa, a common bloom-forming green alga, was used as a model system to examine the effects of elevated carbon dioxide (CO₂) and temperature on growth and photosynthetic performance. To do this, U. pertusa was grown under four temperature and CO₂ conditions; ambient CO₂ (400 μatm) and temperature (16℃) (i.e., present), elevated temperature only (19℃) (ET; i.e., warming), elevated CO₂ only (1,000 μatm) (EC; i.e., acidification), and elevated temperature and CO₂ (ET and EC; i.e., greenhouse), and its steady state photosynthetic performance evaluated. Maximum gross photosynthetic rates (GP_max) were highest under EC conditions and lowest under ET conditions. Further, ET conditions resulted in decreased rate of dark respiration (R_d), but growth of U. pertusa was higher under ET conditions than under ambient temperature conditions. In order to evaluate external carbonic anhydrase (eCA) activity, photosynthesis was measured at 70 μmol photons m⁻² s⁻¹ in the presence or absence of the eCA inhibitor acetazolamide (AZ), which inhibited photosynthetic rates in all treatments, indicating eCA activity. However, while AZ reduced U. pertusa photosynthesis in all treatments, this reduction was lower under ambient CO₂ conditions (both present and warming) compared to EC conditions (both acidification and greenhouse). Moreover, Chlorophyll a and glucose contents in U. pertusa tissues declined under ET conditions (both warming and greenhouse) in conjunction with reduced GP_max and R_d. Overall, our results indicate that the interaction of EC and ET would offset each other’s impacts on photosynthesis and biochemical composition as related to carbon balance of U. pertusa.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.84-84
• /
• 2002

The advantages of the OPS techniques(Vajta G et al, Mol Reprod Dev 51: 53-58,1998) give 1) high survival rates of various types of eggs, 2) quick and simple process, 3) inexpensive equipment and reduced chilling injury. The efficiency of IVM/IVF technique in the porcine species is relatively lower than that obtained in other species such as ruminants. Two experiments were designed to investigate the effects of in-vitro fertilization of porcine oocytes matures using different OPS protocol for chilling and warming of vitrification. Porcine oocytes from ovaries collected at abattoir were matured for 44 hours in TCM199 Earle's salt supplemental with pyruvate, pff, L-cysteine, hormones and gentamycin. Oocytes were denuded and fertilized with frozen boar semen by common method. Porcine embryos produced routinely by in-vitro culture system of NCSU23 medium. The vitrification and the warming were conducted by OPS method with the glass micropipette instead of straw vessels and modified the protocol of G.Vajta(1999). In Exp 1, Chilling/Warming:Holding Medium(HM)+EG+DMSO/HM +sucrose Medium(SM) at 39$^{\circ}C$ warm stage. In Exp 2, : PBS+CS+EG+Ficoll+ Trehalose/PBS+Trehalose at 25$^{\circ}C$ stage. Filling, freezing, packing, thawing out and further culturing were performed to follow the basic protocol of G Vajta. During IVM-lVC and post-warming, fertilization parameter and developmental potential were compared to and statistically analysed. It was not significantly different from Exp 1 and Exp 2 but 25$^{\circ}C$ of stage was slightly higher on the morula/blastocyst forming rate and better atmosphere for worker than that at 39$^{\circ}C$ stage.

• 소성∙가공
• /
• 제19권8호
• /
• pp.447-451
• /
• 2010

In this paper, a useful die system for warm plate forging of a large axle housing of heavy-duty trucks is presented. A die system composed of material flow guide pin as well as upper die and lower die is proposed to reduce the inherent thickness reduction along the bent corner of the product which deteriorates structural strength and fatigue life in its service. The role of the pin assembled in the upper die is to prevent formation of sharp corner in early forming stage and to supply material in the lower die cavity sufficient enough to thicken the bent corner at the final stroke. The mechanism of the die system is given and its effect on corner thickness of the product is revealed by two-dimensional finite element analysis under plain strain assumption. Three-dimensional finite element solutions are also given to verify validity of the two dimensional approach and to show the mechanics of the die system in detail. The die system has been successfully applied to manufacturing the axle housing of heavy-duty trucks.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.14-22
• /
• 2011

The artificial lights to be introduced for the plant factories is requiring the artificial light resources with minimizing the energy consumption to reduce the greenhouse gases which is a major cause of global warming, and maximizing the efficiency in photosynthesis effect light-wave range, in which the plants can be greatly grown and developed, and having the signal light-wave range for forming the light types. the best growing and developing environment for the plants has recently realized with utilizing the LED(Lighting Emitting Diode) lamps, as a environment-friendly green lamps, which can elevating the light efficiency with using only the specific light wave range. In this study, to provide the necessary lights for the full artificial light type of the plant factory, the following research/study and experiments has been conducting. experiments of the spectrum for each light sources, and LED, The intensity of illumination, Irradiance, Photosynthesis Photon Flux Density.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권1호
• /
• pp.36-40
• /
• 2016

Mulberry fruits also have tremendous potential for providing various valuable industrial products of very high economic value for human beings. Nevertheless, through global warming, the popcorn disease caused by sclerotia forming fungi reduces the productivity of mulberry fruits in worldwide. So, in this study, we investigated damage ratio of mulberry popcorn disease in mulberry fruit production farm (Buan, Jeongueb, Sangju, Gochang in Korea). In Jeonbuk Buan, popcorn disease rate was the highest about 30%, on the other hand, in case of Gyungbuk Sangju and Jeonbuk Gochang, not damage. Also, we investigated about popcorn disease prevention by various of chemical treatment methods.

• 한국지구과학회지
• /
• 제23권6호
• /
• pp.455-460
• /
• 2002

이 연구는 6차 고등학교 공통과학 교과서의 내용 중 온실효과 개념에 대한 본문진술과 제시된 그림 및 도표들을 분석하고 오개념 유발과 관련하여 문제점을 지적하고 그 개선방안을 모색하였다. 과학교과서의 개념진술이 정확하지 않아 학습자들에게 오개념을 유발하거나 재강화 할 가능성이 있는 여러 진술문을 발견하였고 학생의 과학적 개념형성에 부족한 그림이나 도표들도 발견되었다. 이들은 온실효과의 주 역할 기체와 변화, 지구온난화, 에너지원, 실험, 물리적 과정, 온실기체와 관련된 것들이다. 이들 개념진술이나 그림, 도표를 대체할 개선방안들을 제시하였다.

• 한국가구학회지
• /
• 제22권2호
• /
• pp.91-100
• /
• 2011

Communication has increasingly become important between peoples in the modern society. The change in the composition of a family brought by urbanization and industrialization caused structural changes in the society, and the lack of communication between people have incited various social conflicts rising from individualism and ego-centrism. Thus in this era, domestic environment is one of the most significant environment that enables one to transform into an appropriate member of the social community as well as develop appropriate traits of one. The living room, which served as an arena of communication for family members is now replaced with TV, a popular media, and has lost its original role in the house. The living room furnitures today are designed to facilitate people in viewing TV, not to enhance communication between family members. Thus in this research, I would like to propose a new concept of 'communication furniture' and various examples to suggest appropriate, desired role of living room furniture in households today. In addition, I hope this research contributes to forming a beneficial living room culture and a domestic environment as well as a heart-warming, human society.

• 기술발표회
• /
• 통권2006호
• /
• pp.146-155
• /
• 2006

2006년도 집중호우에 의해 발생된 강원도지역의 수해에 대하여 자료를 수집, 분석하였으며 수해의 발생기구 및 유형에 따른 피해정도와 저감방안에 대한 고찰을 실시하였다. 2006년 7월 15일-17일 사이의 집중적인 호우는 강원도 지역에 많은 피해를 주었는데, 특히 강원도 인제, 양양, 평창지역에서의 피해로 수십명의 인명피해와 재산피해를 발생시켰다. 최근 들어 발생되는 집중호우로 인한 피해 중 토석류에 의한 피해가 많은 이유 중에는 지구온난화로 인한 100mm에 가까운 시간당 강우량을 보이고 있어 국내에서 산악지가 형성된 구간에서는 어느 지역이나 토석류가 발생될 가능성을 지니고 있다고 할 수 있다. 그러므로 본 연구에서는 2006년 7월에 발생된 강원도 인제, 양양지역을 중심으로 토석류 피해에 대하여 자료를 수집, 분석하였으며 토석류 발생기구 및 유형에 따른 피해정도와 저감방안에 대한 고찰을 실시하였다. 앞으로 빈번해지는 토석류에 대한 관리체계의 확립 및 보완대책과 토목 공사시에 반영될 수 있는 방안 등을 모색해야 할 것이다.