• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.18-23
• /
• 2020

The maximum speed and pressure distribution close to a warhead are altered based on the warhead shape, thereby resulting in changes to the flight distance and the destructive power. In this study, flow analysis was carried out based on the warhead shell shape. The maximum flow rate was detected at the side of shell, with a lower flow rate being found at the rear of the shell. In addition, the maximum pressure was detected at the warhead. It was also found that the reduction in the flow rate between the rear and the side of the shell in model A was smaller than that in model B. The obtained results are expected to be useful in the future design of shell warhead shape.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.529-538
• /
• 2006

Separating a reentry vehicle into warhead and body is a conventional and efficient means of producing a huge decoy and increasing the kinetic energy of the warhead. This procedure causes the radar to track the body, whose radar cross section is larger, and ignore the warhead, which is the most important part of the reentry vehicle. However, the procedure is difficult to perform using standard tracking criteria. This study presents a novel tracking algorithm by integrating input estimation and modified probabilistic data association filter to solve this difficulty in a clear environment. The proposed algorithm with a new defined association probability in this filter provides a good tracking capability for the warhead ignoring the radar cross section. The simulation results indicate that the errors between the estimated and the warhead trajectories are reduced to a small interval in a short time. Therefore, the radar can produce a beam to illuminate to the right area and keep tracking the warhead all the way. In conclusion, this algorithm is worthy of further study and application.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.5
• /
• pp.726-734
• /
• 2012

In this paper, a practical warhead tracking filter is proposed for developing a FMCW (Frequency Modulation Continuous Wave) seeker with anti-ballistic missile capability. For reliable warhead tracking, the measurement originated from the warhead section of a ballistic target should be separated from other measurements. Futhermore, since the FMCW seeker is based on triangular frequency modulation, the multiple measurements obtained in different chirp periods should be properly associated. As a systematic way to solve the problem, the measurement pairing problem under cluttered environment is reformulated as a data association filtering problem and the PDA (Probabilistic Data Association) scheme is applied. The proposed warhead tracking filter provides better warhead tracking performance compared to the conventional range tracking algorithm and nearest neighbor warhead tracking filter. The effectiveness and reliability of the proposed method are verified using the FMCW seeker simulator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.1
• /
• pp.59-65
• /
• 2004

Survivability of the general purpose warhead during the target impact was studied. We first simulated the penetration phenomena and temporarily defined the survivability of the warhead at the impact situation. Next we launched the warhead projectiles by using Counter Mass Gun(CMG) system against the simulated specific steel target. The recovered warheads were carefully investigated and the penetration behaviors were analyzed. As a result the warhead can be hardened efficiently to enhance the survivability with the help of CMG test ＆ analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.2 s.17
• /
• pp.118-125
• /
• 2004

In anti-ship missile, the seeker and guidance control units are located in front of warhead. When the missile hits target, these structures play an important role to warhead structure like a shock absorber Because the shock waves are attenuated, the survival probability of warhead increases which guarantees the explosive train. In this thesis the role of frontal sections is studies. The theoretical analysis and numerical analyses using LS-DYNA code are performed. To prove the effect of shock absorber, the penetration test using subscale prototype warhead are executed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.5
• /
• pp.440-448
• /
• 2015

Kinetic energy(KE) rod warhead system is a new interceptor which combines advantages of existing ones. This system is less dependant on a precision guidance than direct hit type warhead and gives high penetration rates than blast fragmentation type warhead. In this paper, isotropic KE rod warhead system is introduced with detonation/deployment model. A penetration effects of the deployed rods are calculated using TATE penetration equation. Also, an engagement performance analysis method is suggested. Finally, an optimal detonation time and engagement geometry is derived by Monte-Carlo simulation in various engagement situation using the performance analysis factor.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.6
• /
• pp.85-94
• /
• 2019

Warhead and debris show the different micro-Doppler frequency shape in the spectrogram because of the different micro motion. So we can classify them using the micro-Doppler features. In this paper, we classified warhead and debris in the separation phase using CNN(Convolutional Neural Networks). For the input image of CNN, we used micro-Doppler spectrogram. In addition, to improve classification performance of warhead and debris, we applied the preprocessing using CA-CFAR to the micro-Doppler spectrogram. As a result, when the preprocessing of micro-Doppler spectrogram was used, classification performance is improved in all signal-to-noise ratio(SNR).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.238-245
• /
• 2017

This paper deals with the scale effects of warhead on concrete penetration. We investigated the scale effects using finite element analysis and Young's penetration equation. As the scale of penetration test decreases, the strain rate effects of target increases, and then strength of concrete target increases. This means the residual velocity and penetration depth of warhead decreases as the test model size decreases. Young's penetration equations are transformed with various penetrator mass and scale cases as a function of scale ratio. Penetration distance and residual velocity are not simply changed by the geometric scaling law.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.266-269
• /
• 2012

This paper introduces a signal processing technique for discrimination of ballistic missile's warhead. An interceptor missile to destroy the enemy's ballistic missile requires an information on the location of missile's warhead. In order to detect and locate the missile's warhead, a seeker radar in the interceptor missile makes use of chirp waveform to generate high resolution range profiles(HRRPs). We applied one of the well known spectral estimation technique called ESPRIT (Estimation of Signal Parameters by Rotational Invariance Technique) to these HRRPs to estimate scattering centers on the target. Using the information on the one-dimensional(1-D) scattering centers, we can find the location of the warhead by estimating the length of the missile, Simulation results show that the proposed signal processing technique is efficient in discriminating the warhead of an ballistic missile.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.12
• /
• pp.904-912
• /
• 2019

We have studied the numerical analysis about the fragment ejection velocity and spray angle when the High Explosive warhead detonated at proximity distance at an aircraft. To study the physical quantities about the warhead components is very important to assessment the vulnerability of aircraft. Generally, the physical quantities about the components of a warhead such as the mass, length, diameter and charge to mass ratio are unknown. Therefore, it is required to estimate the physical quantities by using physical continuities of similar threats. The empirical formulas to understand the dependence among charge to mass ratio, length and diameter ratio were driven by using the physical parameters of similar threatening such as terrier, sparrow. As a result, we confirmed that the dead mass ratio was closed to 20% of warhead mass since the metal case of the proximity threat acts as a simple carrier. This implies that the effective length and diameter of High Explosive Compound is smaller than the length and diameter of warhead, and become a key to understand the large ejection gradient velocity and small spray angle of fragments within 6 degree.